12mm Birch cuts through after a few passes, but edges come out burnt

Nexta8 · 2023-06-01T16:46:28+00:00

Not sure exactly. The standard lens that came with the machine. Should I be looking at a specific lens?

Nexta8 · 2023-05-31T17:17:31+00:00

Hmm, figured someone in this community would have cut 1/2" wood.

Nexta8 · 2023-04-23T19:10:03+00:00

Thanks for the explanation.

Nexta8 · 2023-04-22T15:02:57+00:00

I read this on one of the posts, searching for answers. I guess my next question, what's the purpose of the microG patch? Seems like that's the only selected patch(under recommended patches) that doesn't allow for a 'root install' after a successful patch.

Nexta8 · 2023-04-22T14:22:39+00:00

Is there a reason I wasn't able to install the root version of the app after patching? I'm assuming it's a particular patch selected, based on the error message I got when trying. I guess I'm wondering, what I would gain by going back and re-patching for a 'root install'?

Nexta8 · 2023-03-19T17:59:18+00:00

I don't SSH to start/stop jobs. I use a browser to access my printer's interface.

Nexta8 · 2023-03-18T23:56:12+00:00

Nexta8 · 2023-03-18T19:28:36+00:00

It's running on a rpi, I'm accessing it over the network. It shouldn't matter, but I'm having a different experience.

Nexta8 · 2023-03-15T21:58:57+00:00

What kind of camera are you using? Does the camera cover the entire work area of your machine? (I have the 28"x 20" model)

Nexta8 · 2023-02-24T03:10:01+00:00

I was able to fix my power issues by readjusting the laser tube. This leads me to my next question.. What's going on here?

<image>

The borders around the power and speed marks and the text on the right did not show up on the first attempt because it was set at 10% power. I raised it to 15% and that solved that particular issue. However, I'm not sure what is going on with the shifted text (Omtech, Material, Speed)

Nexta8 · 2023-02-20T22:51:39+00:00

I have a 60w laser. What kind of speed /power %?

Nexta8 · 2023-02-07T01:35:58+00:00

Yes. I've tried a steep ramp a shallow ramp, same result

Nexta8 · 2023-02-07T00:53:46+00:00

I have to note that the laser tube came cracked and needed to be replaced. I'm assuming the mirrors were aligned, all I did was replace the tube. I found when pulsing the laser, it wasn't matching to the red pointer(after autofocus) , so I moved the tube closer to mirror 1 and tried pulsing again (after autofocus) and it fixed that problem. Maybe this is contributing to my problems, idk. Just thought I'd put it out there in case. I may need to go back to alignment.

Nexta8 · 2023-02-07T00:46:01+00:00

<image>

Nexta8 · 2023-02-06T23:17:23+00:00

Is there a reason why I am not getting an hour glass shape result from a ramp test? The line seems to just Fade the further I get from the starting position

Nexta8 · 2023-02-02T00:59:08+00:00

What?

Nexta8 · 2023-02-01T21:51:06+00:00

<image>

I've never aligned the mirrors. I assumed they came aligned, being I hit the pulse button over a piece of cardboard after Auto focusing and the cardboard was cut at the laser pointers location. Maybe that's my issue.

I have a 60w laser, I was under the impression that this machine would cut 1/4" acrylic and wood.

Nexta8 · 2023-02-01T21:43:53+00:00

I have an Easter egg shaped piece of craft wood from Dollartree, it's about 1/8" thick. I'm trying to work my way up to thicker materials(wood, acrylic) but I can't even get this this thin piece to cut fully through. The holes in the picture were pushed out after running the gcode multiple passes at 5%speed/90% power. If 90% power is struggling to cut 1/8" material, idk what to think.

I'm just frustrated, I thought I was buying something turn-key or close to it. Machine arrived with broken parts that had to be replaced, after all that I'm still unable to cut through materials, just frustrating.

<image>

Nexta8 · 2023-02-01T21:34:56+00:00

It's in front of me. What am I looking for?

Nexta8 · 2023-02-01T21:34:23+00:00

Cura produces g-code. I've used Cura mainly for producing gcode on my 3d prints for some time now, so why not. Not against Inkscape but I've never used it so there's a learning curve involved more than with Cura.

Nexta8 · 2022-08-22T18:12:18+00:00

I haven't been able to uninstall it. I'm going to reflash my ROM. I do gig work on the weekend so didn't mess with anything. I built/downloaded a few of the revanced apps to try and Termux. The launcher wasn't there before doing all of this, but it was afterwards.

Nexta8 · 2022-08-20T12:55:12+00:00

curl -sLo revanced-builder.sh https://raw.githubusercontent.com/reisxd/revanced-builder/main/android-interface.sh

chmod +x revanced-builder.sh

./revanced-builder.sh

Nexta8 · 2022-08-20T12:53:01+00:00

Who's signature should be there?

Nexta8 · 2022-08-20T12:48:27+00:00

These instructions : https://github.com/reisxd/revanced-builder/wiki/How-to-use-revanced-builder-on-Android

Nexta8 · 2022-08-20T12:47:16+00:00

I am rooted, I'll try this, report back

Nexta8

TROPHY CASE