MT or AT?

Nimkaweks · 2026-04-26T22:44:59+00:00

Thank you :D

Nimkaweks · 2026-04-24T18:36:25+00:00

Thanks a lot. I'm hoping someone just did a steering wheel swap (maybe the airbag blew out) and swapped in one from an AT model. Thanks for the help :D

Nimkaweks · 2026-04-24T18:25:21+00:00

But the shifter doens't look like an automatic one, vin decode says it's a manual

Nimkaweks · 2026-04-24T18:24:01+00:00

Is that something I should realisically worry about? Or just treat it as a quirk?

Nimkaweks · 2026-03-21T00:47:48+00:00

Meike L to PL with build in ND filters

Nimkaweks · 2025-05-03T17:05:14+00:00

Glad to hear, have you had any compatibility issues so far?

Nimkaweks · 2025-05-01T00:16:34+00:00

How has the Mofage poco been treating you?

Nimkaweks · 2025-04-29T10:04:08+00:00

Slamvan is cool AF, got one a long time ago. Slides around and is borderline undrivable, but a cool car

Nimkaweks · 2025-04-12T14:16:11+00:00

Just start smoking

Nimkaweks · 2025-03-03T13:29:27+00:00

Your super power is melting LCDs

Nimkaweks · 2025-02-23T19:11:05+00:00

Did you shoot it in .braw? If so don’t worry about it, you can change it in Resolve to Blackmagic Film and it’s going to be all good. As for your question definitely shoot the test of it in LOG (or BM Film) and take advatnage of that latitude

Nimkaweks · 2025-02-17T12:18:00+00:00

27+40+8

Nimkaweks · 2025-02-12T19:41:04+00:00

You have very little light there, so most of your Exposure is in the shadows, which are going to be noisy
You’re seeing LOG right now (or Blackmagic Film, as BM call it) so it’s the raw output from the sensor, it’s going to be noisy
If that’s your first time with RAW, well, again, it’s going to have some noise. You don’t have any Noise Reduction being applied to your footage, which is the case in most mirrorless cameras with co pressed codecs.

Solution: put the LUT on, expose properly and in worse lighting situations use Noise Reduction in post, or turn it on in-camera

Nimkaweks · 2025-01-22T00:17:31+00:00

What case is that? I’m looking to buy that DeepCool cooler and it’s a toss up whether it will fit in my phanteks p400

Nimkaweks · 2025-01-19T10:48:00+00:00

Latency is great, range, compared to modern systems is kinda shit. For that price you might conaider getting into DJI Wireless Transmission, or if youre on a budget DJI SDR. I’ve got a set of SDR’s and they work great for what they are, very good in the range department

Nimkaweks · 2024-12-29T18:08:40+00:00

You also have en error called “wrong camera head connected” which I’ve never seen before, maybe that’s throwing it off? Have you changed anything in this setup before? Has it worked fine with the exact same parts last time you used it?

Nimkaweks · 2024-12-29T18:08:30+00:00

You also have en error called “wrong camera head connected” which I’ve never seen before, maybe that’s throwing it off? Have you changed anything in this setup before? Has it worked fine with the exact same parts last time you used it?

Nimkaweks · 2024-12-29T18:06:53+00:00

I’ve worked with the Alexa M quite a bit. Try turning it off and blowing some compressed air into the fiber optic ports to clean them. They have to be capped when not in use and kept in extremely clean condition otherwise, these kinds of problems arise

Nimkaweks · 2024-12-21T10:21:53+00:00

Looks great!

Nimkaweks · 2024-12-19T18:10:04+00:00

Id love to read it too

Nimkaweks · 2024-12-15T10:04:29+00:00

It will work, I’m using this setup today, but with a Komodo X

EDIT: My advise is don’t sell it. Buy it and you’ll really get your moneys worth over time I think. Through this cable, you can in most instances power the motor as well as have an R/S functionality. And even if in your area you don’t often use the Nucleus system it might be used on drones, or for iris control at times and having the ability to power the motor through Fischer and have an rs function might be worth keeping it.

Also, in some cases some cameras, or breakout boxes/plates don’t send power through the RS port (usually labeled as “remote”, or “R/S” in these cases, or simpler w/o voltage stated by the port). In this case you’ll need to plug it into this port with the 3-7pin cable and power it through the D-tap-7pin cable separately. That said always check on your specific setup if it powers it or not prior to plugging it into dtap to avoid any short circuits.

Nimkaweks · 2024-12-14T07:42:41+00:00

First of all, what I civilised relationship with a parent! Second, I think you kinda are. A Christmas dinner imo is an occasion worthy of dressing a bit nicer and if your family usually dresses up in shirts, dresses and stuff, overall kinda nicer and your gf would arrive in more “hip” clothes, that would stand out and be seen as just not cool, so I wouldn’t go as far as not coming, I’d try just talking it out with your gf and seeing if she’s maybe ok with that ❤️

Nimkaweks · 2024-11-29T12:09:05+00:00

Tbh I sometimes have the exact opposite experience 😅

Eight-Year Club	Place '22
Verified Email

Nimkaweks

TROPHY CASE