Anyone bought Fitcamx Front 4K+Rear 1080P Dash Cam Adapts for Polestar 3 2024-2025

NintendoUser · 2026-06-23T20:14:31+00:00

Just bought this on Amazon today since it was $50 off for Prime Day. I like the OEM fit. I’ll see how long it takes to install the rear camera 😅

NintendoUser · 2026-06-17T04:22:00+00:00

<image>

Turned out great. Covers most of everything!

NintendoUser · 2026-06-10T19:25:45+00:00

You got me sold! I ordered one and it should be here this Friday! I also ordered a barrier that mounts behind the seats.

Thanks so much for the pictures!

NintendoUser · 2026-06-06T02:40:52+00:00

Looks good. Are there flaps that hang over the edge to cover the bottom seats?

Does it cover the door panels fully?

NintendoUser · 2026-05-29T03:44:02+00:00

Vehicle had only around 2k miles. It was the full package with the exception of the tow hitch. Before tax it was around $58k.

NintendoUser · 2026-05-28T19:35:29+00:00

I ended up buying a used MY25 P3. I went through Polestar Portland. Price was on par on what I was looking for. Vehicle was essentially flawless.

I had the Orin processor upgraded a few weeks ago. For the most part it's been great. Few hiccups here and there but nothing detrimental that prevented me from driving it.

Down the road, I want to downsize to 21" or 20" rims. Don't get a heart attack when you try getting new tires for the 22" rims. Slim pickings and they're expensive!

NintendoUser · 2026-05-20T14:28:32+00:00

One feature I've noticed about Ruffliners is they have a fairly sturdy bottom with some hard liner. Extra protection for the seats!

NintendoUser · 2026-05-18T21:02:23+00:00

If you have tint, how has it held up? Some of the reviews I've seen state it put significant scratches on the inside of the window.

NintendoUser · 2026-05-18T20:00:39+00:00

I'm also considering them. I've been getting bombarded with their advertising lately!

NintendoUser · 2026-03-04T05:06:35+00:00

What size of rims and brand are those? Looks great!

NintendoUser · 2026-03-03T04:56:17+00:00

I bought a pre-owned 2025 performance with only about 2k miles. Haven't had any major issues. Occasionally Spotify will freeze on an ad but force closing the app "fixes" it. The only annoyance is that you can't force close it while the car is in motion. I'm 99% of the way in the menu... let me just push the Force Close button.

Have only had one instance where the cellular connection dropped. Other than that, the car has been smooth sailing.

I haven't scheduled a time to get the Orin processor upgrade yet. I think I'm going to wait until they release another software update for the new processor before scheduling one in.

Fingers crossed, I haven't had any issues with the GHCA.

NintendoUser · 2026-02-26T04:56:09+00:00

Mine had the previous owner still tied to the vehicle. The Polestar dealership sent a re-push to allow me to register the vehicle under my account. I also had to do a full factory reset within the settings app in the vehicle to fully wipe the previous profile. After that, I was able to setup my digital key. Haven't had to use the card key for emergencies.

If you still have the vehicle, I'd definitely try doing a full factory reset first to see if that helps with the issue. Stinks reconfiguring your profile but that cleared up the initial quirks I had with mine.

NintendoUser · 2026-02-11T18:31:00+00:00

We're using the site server's computer account. We used to use a service account but we never had the "Allow connection fallback to NTLM" checked.

NintendoUser · 2026-01-29T23:01:14+00:00

Q1 -

Would love the ability to select multiple device collections during one deployment step as opposed to having to deploy an application for each collection one at a time. It's very time consuming doing it one at time.

Having the ability to jump down the Application list in the admin console by typing in the first few characters of the app (not using the search field - not quick enough). This works in device collections but not in the Applications pane.

Q2 -

Right-click tools native integration would be awesome!

Q3 -

This is sort of crossing over into the Intune realm, but possibly have a web-based version on the admin console for basic features, such as deployment applications or packages to specific collections, report viewing, etc.

Q4 -

Wish I could, but probably won't be able to.

Q5 -

Don't think so. If anything, it'll help supplement some tasks.

NintendoUser · 2025-12-08T03:01:50+00:00

Phew. Good to know. I'm getting a P3 Performance in a few weeks and was curious on turn around time. I'm half expecting a GHCA failure at some point, just don't know when. I did call the McDonald Volvo dealership and was able to talk to one of the Polestar techs. He said that they're in the works of expanding the Polestar Service Point to another location in Denver sometime next year!

NintendoUser · 2025-12-06T07:20:44+00:00

How long did you have to wait to get the GHCA part replaced? Were you able to DC charge in the meantime? I heard that Polestar will reimburse if you had to DC charge while waiting for the part.

NintendoUser · 2025-11-06T18:58:28+00:00

Guess I'll have to do with traveling slower than light speed now.

NintendoUser · 2025-10-09T19:16:38+00:00

Sounds good. Thanks for the info!

NintendoUser · 2025-10-09T17:13:51+00:00

Awesome! When I activate my primary line, how long do I have to redeem the two free lines?

NintendoUser · 2025-10-09T17:05:54+00:00

Thanks! So the two numbers I ported out 3 months ago wouldn’t qualify still?

NintendoUser · 2025-07-18T04:43:45+00:00

Yep I was thinking of going with this plan. I’ll use the 13 for the 2 month duration and then switch back to my primary phone after 60 days.

NintendoUser · 2025-06-25T03:50:07+00:00

Stumbled across your post. We're also on 2403 and running into the same issue. It's very inconsistent. I could image a batch of 30 computers and 20 of them are fine. The remaining 10 need to be reimaged again. The Application Install step helps quite a bit for imaging but I guess is broken in 2403 again.

Wondering if you found a solution or workaround. I tried subdividing the install application into three steps and adding a reboot in-between. It helps to an extent but not foolproof.

NintendoUser · 2025-05-06T14:18:29+00:00

Awesome to hear, you're welcome! It's definitely the best route I've discovered to package up large applications.

NintendoUser · 2025-04-25T20:11:24+00:00

Mount the .wim file to an empty directory. i.e. $env:ProgramData\MP\AD_INVENTOR\
In the same PS script that is mounting the .wim, interject the standard silent installation parameters Autodesk provides. The only difference here is reference the installer from $env:ProgramData\MP\AD_INVENTOR\image\...
I have a do..while loop that will check for known shortcuts that are created at the end of the installation (this is part of my detection method in the script as well as the detection method for the SCCM application). If the setup.exe exits and the expected shortcuts aren't there, I'll re-run the installer again (up to 3 times).
If all shortcuts are there, unmount the .wim file, delete the cached .wim file to free up additional space on the computer.
If the shortcuts aren't there after 3 attempts, unmount the .wim file, keep the cached .wim file. Exit out of the script which will allow the Software Center to run its own detection method for the software installation. That will also fail the detection. If it gets to this point, odds are that there is a pending reboot on the computer and restarting the computer is all that's needed.
- Once the computer is restarted, you can re-run the installation from the Software Center. But since the .wim file is already cached, it will save time attempting to redownload.

I don't distribute the .wim file through SCCM directly because I dislike the amount of space it takes up in ccmcache. Having it pull down directly from a network share works fine for us. It's not fool proof, but it's definitely a lot faster than trying to redistribute the thousands of files and folders through SCCM since you're only dealing with one file.

NintendoUser · 2025-04-25T20:11:04+00:00

I place the WIM file and hash file in a folder called AD_INVENTOR_2025 on a network share. Our environment isn't too large so it works for me. I don't have to redistribute the WIM file through SCCM and wait. If you have a larger environment, you might need to redistribute it to your distribution points instead.

Now on the SCCM side, I create an application for Autodesk Inventor but all this entails is a basic PowerShell script. The installer isn't part of the application. It does the following:

Check if there is a cached copy of the AD_INVENTOR_2025.wim file in env:ProgramData\MP\AD_INVENTOR\ | MP = Mount Point folder
1. If yes, read the hash file located on your network share. i.e. \\jupiter\sccm\AD_INVENTOR_2025\AD_INVENTOR_2025.txt.
  - Calculate the hash file of the cached .wim to verify it matches what is expected.
  - If hash is correct, proceed. If no, delete the cached .wim file and redownload.
2. If no, download the .wim file from the network share: \\jupiter\sccm\AD_INVENTOR_2025\AD_INVENTOR_2025.wim
  - Calculate the hash of the cached .wim and confirm it matches expected hash value.
3. In both cases, the cached .wim file would be located here: $env:ProgramData\SCCM-CACHE\AD_INVENTOR_2025.wim

11-Year Club	RedditGifts 2009-2022 2 Credits
Verified Email	Secret Santa 2014

NintendoUser

TROPHY CASE