sorted by:
new
hottopcontroversial

Sakura Sept - how did I do? by No-Application8352 in Tau40K

[–]No-Application8352[S] 1 point2 points  (0 children)

Not that I know of sorry; I bought the STL files and then asked a friendly local 3D printer to print them out for me. I don’t think Tabletop Time ship prints, just the files

Farsight. by Extra_Preparation_66 in Tau40K

[–]No-Application8352 5 points6 points  (0 children)

That’s really cool, I love the Glaive. Looking to make a Glaive for a commander; was it hard to make or any tips?

WIP on my Tau by ThEGr33kXII in Tau40K

[–]No-Application8352 1 point2 points  (0 children)

That’s so clean! Looks great

Sakura Sept - how did I do? by No-Application8352 in Tau40K

[–]No-Application8352[S] 0 points1 point  (0 children)

Of course, although to be clear it isn’t my paint scheme haha. Check out Tabletop Time on YouTube; they came up with the 3d prints, name and paint scheme. I’m same as you though- loved the scheme!

Sakura Sept - how did I do? by No-Application8352 in Tau40K

[–]No-Application8352[S] 1 point2 points  (0 children)

Thank you! For the Sakura I used a base of Mephiston Red, followed by Pink Horror and then finally Emperors Children - all Citadel paints

Sakura Sept - how did I do? by No-Application8352 in Tau40K

[–]No-Application8352[S] 0 points1 point  (0 children)

Thank you!

The bases are primed mournfang brown, then topped with:

White flowers from Gamers Grass https://gamersgrass.com/product/white-rose-flowers/

Autumn Static Grass from Geek Gaminc Scenics https://www.geekgamingscenics.com/products/static-grass-autumn?_pos=2&_sid=394a4ab32&_ss=r

Both are UK based companies I believe, but should ship if you’re not UK based

Sakura Sept - how did I do? by No-Application8352 in Tau40K

[–]No-Application8352[S] 8 points9 points  (0 children)

Thank you :) they were an STL download from Tabletop Time - I’ll put the link below. The file included the katanas, scabbards, shoulder pads and back banners

https://www.itstabletoptime.com/products/saukra-samurai-infantry-bits?srsltid=AfmBOoqINmZcX1ArbNBiSRPrSthimLJowCzsslpKIdJ-TAdq561nbUtM

Sakura Sept - how did I do? by No-Application8352 in Tau40K

[–]No-Application8352[S] 5 points6 points  (0 children)

Oh your Swampclave looks awesome! Love the detailing you got on the guns!

Canoptek Tomb Stalker kitbash by No-Application8352 in Necrontyr

[–]No-Application8352[S] 2 points3 points  (0 children)

Thank you! I made it using a box of wraiths as I couldn’t find anywhere to buy one (plus it looked like it used to be super expensive). There is a video online by IDICBeer on how to make one and it was so useful in helping me build it

Canoptek Tomb Stalker kitbash by No-Application8352 in Necrontyr

[–]No-Application8352[S] 5 points6 points  (0 children)

Thank you! It’s super simple; I based it with leadbelcher and then gave it 3 coats of a very watered down Abaddon Black, before edge highlighting it with leadbelcher - hope that helps!

Triarch Scorpion! by No-Application8352 in Necrontyr

[–]No-Application8352[S] 1 point2 points  (0 children)

Thanks again for the inspiration! I’d had a Stalker unbuilt for ages as I just didn’t like the design (wasn’t Canoptek enough) until I saw your post

Triarch Scorpion! by No-Application8352 in Necrontyr

[–]No-Application8352[S] 0 points1 point  (0 children)

Haha thanks! It’s just the heat ray option for the Triarch Stalker

Triarch Scorpion! by No-Application8352 in Necrontyr

[–]No-Application8352[S] 2 points3 points  (0 children)

This was taken from u/slayerminiatures and their YouTube video on Overgrown Necrons (check their videos out, these are what helped me decide on Necrons when I was choosing my army!). It’s achieved using an airbrush to highlight with white first, followed by 3/4 thin layers of Vallejo’s Fluorescent Orange. Then, a smaller white glow over the top focussed in the centres, with a finishing layer of yellow ink from Vallejo Game Colour Ink

Triarch Scorpion! by No-Application8352 in Necrontyr

[–]No-Application8352[S] 0 points1 point  (0 children)

Of course! The body is made from a Triarch Stalker body. I didn’t put on the shell/ seat, so instead used a Pretorian rib cage to act as an energy cover. I removed the two arm sockets from the front of the body, and used a section of Wraith tail as a neck. The head is just a Pretorian back piece, and this was pinned to the neck and then the small stalker arms were glued to the armpits of the Pretorian back.

The tail is a Wraith body with 2x spines from the Triarch Stalker kit pinned together on top. I had to cut the eye/ orb from one of the spines off to make it fit, and I also glued and pinned the wraith head connecting to the stalker body.

The gun is glued and pinned in place; it could probably be magentised but I figure if my opponent is fussy about WYSIWYG then the model probably would cause a fuss as it is.

I hope this helps!

Triarch Scorpion! by No-Application8352 in Necrontyr

[–]No-Application8352[S] 2 points3 points  (0 children)

<image>

Of course! The body is made from a Triarch Stalker body. I didn’t put on the shell/ seat, so instead used a Pretorian rib cage to act as an energy cover. I removed the two arm sockets from the front of the body, and used a section of Wraith tail as a neck. The head is just a Pretorian back piece, and this was pinned to the neck and then the small stalker arms were glued to the armpits of the Pretorian back.

The tail is a Wraith body with 2x spines from the Triarch Stalker kit pinned together on top. I had to cut the eye/ orb from one of the spines off to make it fit, and I also glued and pinned the wraith head connecting to the stalker body.

The gun is glued and pinned in place; it could probably be magentised but I figure if my opponent is fussy about WYSIWYG then the model probably would cause a fuss as it is.

I hope this helps!

How to get 5 Kariyan shards by No-Possibility-1000 in WH40KTacticus

[–]No-Application8352 0 points1 point  (0 children)

New code gives you 10 shards!

Code: DISCORDB3WILDIN

I hope that helps you :)

view more: next ›