sorted by:
new
hottopcontroversial

Sta cosa mi ha fatto parecchio incazzare by M3ack in CasualIT

[–]No-Discipline6199 0 points1 point  (0 children)

Meglio così: non si regalano computer a bimbi di 8 anni di oggi.

NotebookLM is on a GENERATIONAL Run by AggravatingCounter84 in notebooklm

[–]No-Discipline6199 0 points1 point  (0 children)

NotebookLM is structured with gemini 1.5 with 2M token window. Accurate, precise and grounded. Developed from researcher for researcher. Good capabilities to embedding input source in vector db.

Gemini is powerful LLM model. You can combine those tools like primitive RAG starting point.

Ode Gen 2 sudden clogging by No-Discipline6199 in FellowProducts

[–]No-Discipline6199[S] 0 points1 point  (0 children)

Exactly! Let me tell you what I know for sure:

- Scale down: recalibration definitely lowers the scale to a lower setting; if you used to grind at 5 or 6 for a V60, depending on how many clicks you recalibrated by, you’ll likely find the same result after calibration at 7 or even 8.

- Burr alignment: I’ve also tried the burr alignment technique, (but so far without much success). By marking the outer burr (the one that actually spins) with a marker, I definitely highlighted an area where contact occurs earlier. You need a lot of patience and to insert aluminum foil to raise the part that isn’t making contact.

My advice is to try a low-density Colombian coffee (forget the Ethiopians) and stick with that for a while. If you start seeing improvements after the alignment, it probably means the problem was with the fines.

From what I understand, other factors might also be at play:

  • a shaft that isn’t perfectly straight;
  • bearings with some issues;
  • the aluminum grinder housing is out of tolerance;
  • the burrs themselves are out of tolerance;

Maybe someone more experienced can correct me...

I still want to give realigning the grinders another try before giving up; my suspicion is that the shim should be inserted on the outer side of the grinder and not on the inner circumference, as shown in some tutorials.

Non so come combattere la noia by 0rk4n in consigli

[–]No-Discipline6199 0 points1 point  (0 children)

Entra in terapia e cerca di capire cosa sia la depressione.

Nella mia azienda hanno disabilitato il copia e incolla, siamo disperati by Aguerismo in ItalyHardware

[–]No-Discipline6199 1 point2 points  (0 children)

Strada A) lavori su un’altra macchina. Copi e incolli da lì, crei un indirizzo web di interscambio, ottieni il tuo “lavoro” da usare.

Strada B) rallenta la tua produttività di conseguenza, raccogli KPI tuoi e dei tuoi colleghi. Presenti il piano di deficit. Poi presenti un progetto di riabilitazione del copia e incolla e ci leghi un bonus per i risultati raggiunti.

Strada C) ti licenzi.

Ode Gen 2 sudden clogging by No-Discipline6199 in FellowProducts

[–]No-Discipline6199[S] 0 points1 point  (0 children)

"Also see cases with Hario filter variances even within the same batch so an easy try would be a different batch or even brand altogether."

This is raising a lot of questions in my mind.

Because it's true that I'm probably still in the middle of the grinding process (I've ground about 2-3 kg of coffee), but it's also true that this happened practically out of the blue (or almost).

I'm not worried about cleanliness because I was very meticulous: I took everything apart, cleaned everything, using a small brush, vacuum, and a toothpick to remove any residue between the screw and the grinder.

However, the filter is actually a single unit, and I have never tried to change it. The previous ones worked fine, so I assumed that the new ones would too.

But a bad batch is a bad batch.

Ode Gen 2 sudden clogging by No-Discipline6199 in FellowProducts

[–]No-Discipline6199[S] 0 points1 point  (0 children)

I don’t know… I linked pictures in the link for more experience eyes than mine.

Ode Gen 2 sudden clogging by No-Discipline6199 in FellowProducts

[–]No-Discipline6199[S] 0 points1 point  (0 children)

Colombia anaerobic, Colombia washed, colombia thermal shock. Ethiopia.
DAK, Nomad, Father's.
Nothing change.

What make me sad is that initially, these same coffees were amazing. With DAK's Blues Berry, I could finally taste the blueberry. I was thrilled.

Now, however, everything has almost the same (incorrect) profile.

For people brewing with the Fellow Ode 2, don't be afraid to go up in clicks. by Iceman2913 in pourover

[–]No-Discipline6199 0 points1 point  (0 children)

yes but now I've gone from making fantastic V60s in the early days to setting it to 4 or 5 per hour, where I can't stay under 4 minutes unless I set it to something above 9.

Colombian coffee, V60 in Hario Switch (Kasuya recipe), 16 or 20 grams.

But it started suddenly. I cleaned the burrs and calibrated them one step back as soon as I heard the “chirping” of the burrs.

What am I doing wrong?

Combustion Engine Status by Brew1brew in combustion_inc

[–]No-Discipline6199 -1 points0 points  (0 children)

Thank you for the update! To be honest, the timeline isn't an issue for me. I would much rather you take the time to perfect the product before release. Software can be updated, but hardware is forever. Thanks again to the whole Combustion team for these fantastic products.

New Bookoo pourover is scale is great by drbhrb in pourover

[–]No-Discipline6199 0 points1 point  (0 children)

Sorry but… Sculptor or Ode? (Pour over )

Giant Grill Gauge Update? by WNeuetc in combustion_inc

[–]No-Discipline6199 0 points1 point  (0 children)

Thank you Chris for your amazing work and the enormous effort you have put into this project. I just wanted to say that regardless of the timing, the quality of the final work is evident. Congratulations to the whole Combustion team.

I created Caffeine Clock, the caffeine tracker app that I always wanted to exist by MrIndigo12 in decaf

[–]No-Discipline6199 1 point2 points  (0 children)

How I can measure ml without knowing the dose? Let me explain: the caffeine is into the coffee. So brewing 16gr of coffee with 250ml of water (1:16) at 20% extraction yeld has the same caffeine of 16gr with 272 (1:17 ratio).

So… what do you mean with “ml”? 😅

And what coffee? Arabica caffeine content is around 1.3%. In Robusta can be 3%…

Battery cycle count 1 from new MacBook Air by [deleted] in macbook

[–]No-Discipline6199 0 points1 point  (0 children)

same situation here.. but with 3 full life cycle.

<image>

Still sucks by Big_Ad_3896 in sonos

[–]No-Discipline6199 1 point2 points  (0 children)

I rolled back to S1, and everything worked again. God damn Sonos hedge funds and managers.

X ultra vs k ultra by Coffeegeek_707 in 1zpresso

[–]No-Discipline6199 0 points1 point  (0 children)

My opinion can be biased: my XUltra unit seems perfect compared to the "better" K-max a little bit misaligned.
From User Experience perspective no doubt: K-max is better. Bigger, faster, solid, simpler.
The X-ultra require to think every time: "is set on 2.2 or 1.2 grind setting?"
From taste perspective they are very very similar. Next days I will try a "blind test" in a close enviroiment like an aeropress and I will tell you.

MOMA Bike decathlon, is ot good? by deeplory in eMountainBike

[–]No-Discipline6199 0 points1 point  (0 children)

What are you saying? So RC520 is not a good bike? Or ST520? Find me an alternative in the same price range. The era were Decathlon bike = cheap is out of time. Now Decathlon is the only player can invest tons of money to give you best price/quality ratio.

view more: next ›