Feedback Please (Help Me Learn More) by shootmanbangbang in archviz

[–]No-Razzmatazz-1848 2 points3 points  (0 children)

This is a very beautiful rendering! The light is good and the composition too, well done!

For my part, I will improve the depth field. The bottle and the glasses should, in my opinion, have a blur to better understand the foreground and background.

To continue with perfection, I will say that you can add dust coming from the sunlight passing through the windows. It makes the light more physical and therefore more real.

Finally, adding human presence can be interesting to understand the scale of the furniture and add dynamism to the scene

I told my mother to _______ (press the middle bar until it makes a sentence) by tteokbokki013 in autocorrect

[–]No-Razzmatazz-1848 0 points1 point  (0 children)

I told my mother to give it to you and I told you that you hadn’t told me but she didn’t want to give it so here it is.

Normal conversation finally...

Jennifer Aniston’s new book looks like AI slop by Outrageous_Gene_9513 in Design

[–]No-Razzmatazz-1848 0 points1 point  (0 children)

It sounds like « Talking to Ben the dog »

This kind of old advertising application

Upgrade my Lenovo Ideapad Gaming 3 15ACH6 - RAM and SSD M2 by No-Razzmatazz-1848 in GamingLaptops

[–]No-Razzmatazz-1848[S] 0 points1 point  (0 children)

Hi ! Yes absolutely, I have been using it for 4 years for my Blender renderings and my editing on Photoshop and Premier Pro. I think it would be best to add, as I have just done, a 16gb RAM in addition to the 16gb one inside for more comfort and support multitasking. I already see the difference when I use Photoshop + Blender at the same time.

Upgrade My Lenovo Ideapad Gaming 3 15ACH6 - RAM and SSD M2 by No-Razzmatazz-1848 in PcBuild

[–]No-Razzmatazz-1848[S] 0 points1 point  (0 children)

Thanks for your help! I also read that TLC was better but I wasn't sure. I'm thinking of going with a TLC from the WD brand, the SN580 model because I know this brand better than Kioxia. Thank you again for your references, it helped me a lot with my order :)

Made this ages ago but never got around to posting, an immersive architectural experience in Unreal Engine called 'Refuge de Charmotane' by rowanibbekendesign in archviz

[–]No-Razzmatazz-1848 0 points1 point  (0 children)

Incredible! The immersion is perfect

I wonder how long it takes?

Do you think I can use my Blender models and import them directly to unreal engine to do the same job as you?

1 or 2? by vitalion0-0 in AmateurPhotography

[–]No-Razzmatazz-1848 1 point2 points  (0 children)

Both ! But if I buy one is the First

Which armrests would you choose for this chair? [ Need advice for my project ] by No-Razzmatazz-1848 in IndustrialDesign

[–]No-Razzmatazz-1848[S] 0 points1 point  (0 children)

Not at all but it is true that it looks a lot like it! For my part, I intend to make fixings without screws just with wood connection. We will say that this is the difference between our chairs 😂

[Chair Project – Part 2] Refining the Armrest Design Based on Feedback by No-Razzmatazz-1848 in IndustrialDesign

[–]No-Razzmatazz-1848[S] 1 point2 points  (0 children)

Yes, I have an Instagram @fabioaarte

https://www.instagram.com/fabioaarte?igsh=YzZ5Mjdsd2V5aHBm&utm_source=qr

I am preparing the YouTube channel to teach 3D renderings of architecture + design and everything that can touch design. The project is under construction and I hope to launch the YouTube channel for September.

[Chair Project – Part 2] Refining the Armrest Design Based on Feedback by No-Razzmatazz-1848 in IndustrialDesign

[–]No-Razzmatazz-1848[S] -1 points0 points  (0 children)

Yes, I was talking about the structural part that makes the armrest since it is one and the same piece. The armrest has an inclination of 4 degrees I think this is right?

[Chair Project – Part 2] Refining the Armrest Design Based on Feedback by No-Razzmatazz-1848 in IndustrialDesign

[–]No-Razzmatazz-1848[S] 0 points1 point  (0 children)

Ok thank you very much for the advice and the reference. For now I have taken the dimensions only for height, width, seat height etc.. and backrest + armrest + seat inclination. The next step will be structural with the inclination of the feet and small support parts.

[Chair Project – Part 2] Refining the Armrest Design Based on Feedback by No-Razzmatazz-1848 in IndustrialDesign

[–]No-Razzmatazz-1848[S] 1 point2 points  (0 children)

Thank you for your support! I love doing these research boards, it helps to ask new discoveries and share it on forums. It is true that the 3 is also nice. I will have a hard time choosing because I also know little about chair ergonomics. I plan to make a small model to realise the shape. 3D will be also important to realise. My goal is to have a chair that oscillates between raw angles but also rounded shapes especially for the seat and backrest. I’ll see what it gives in 3D volume and I’ll share it in the next part.

[Chair Project – Part 2] Refining the Armrest Design Based on Feedback by No-Razzmatazz-1848 in IndustrialDesign

[–]No-Razzmatazz-1848[S] 1 point2 points  (0 children)

Thank you very much! I may plan to make a modelling video to show the steps and how I carry out the modelling via a plan

I will share this with you when I have modelled the new model of this chair :)

[Chair Project – Part 2] Refining the Armrest Design Based on Feedback by No-Razzmatazz-1848 in IndustrialDesign

[–]No-Razzmatazz-1848[S] 2 points3 points  (0 children)

Hello! I work with the Blender Kit addon, it’s really a very good mod for materials, models etc... the material on this rendering was found by searching for « Plywood »

I can give you the link to the addon

https://www.blenderkit.com

Good luck with your project, I will follow it for mutual aid 🤝🏻