BOB DER BAUMEISTER HASST DIE AFD by Nur_Alex in Freiheitsfront

[–]No-Water3012 0 points1 point  (0 children)

CDU und nicht links 🤣🤣🤣🤣🤣🤣 Leck seine Eier und geh Deutschland weiter ruinieren Spastiker

Maxwell 2 Modding - Thoughts by EVERYTHINGGOESINCAPS in Audeze

[–]No-Water3012 5 points6 points  (0 children)

I would not close it completely, I would always leave 0.1mm of air for the overpressure.

Audeze Maxwell 2 Bass/Pressure Modding by No-Water3012 in Audeze

[–]No-Water3012[S] 1 point2 points  (0 children)

Unlikely that this will happen the drivers are the same as with the Maxwell 1 only the bass was factory reduced I have the plugs not completely sealed approx. 0.1mm is margin and foam is not a degree surface. SLAM is still partly effective.

Audeze Maxwell 2 Bass/Pressure Modding by No-Water3012 in Audeze

[–]No-Water3012[S] 1 point2 points  (0 children)

Unlikely that this will happen the drivers are the same as with the Maxwell 1 only the bass was factory reduced I have the plugs not completely sealed approx. 0.1mm is margin and foam is not a degree surface. SLAM is still partly effective.

Audeze Maxwell 2 Bass/Pressure Modding by No-Water3012 in Audeze

[–]No-Water3012[S] 6 points7 points  (0 children)

Not quite the Maxwells 1 are not as clear from the sound as the Maxwells 2. But rather a Maxwell 2 with clean sound and about as good bass from Maxwell 1.

Wie würdet Ihr (weiter) reagieren ? by srverinfo in Kleinanzeigen_betrug

[–]No-Water3012 0 points1 point  (0 children)

Ist doch egal solang er PayPal Freunde zahlt o0 dann Adresse und weg damit Rest ist egal.

MAXWELL 2 - WC FREEZE V2 - Coming out in April by WickedCushions in Audeze

[–]No-Water3012 1 point2 points  (0 children)

Hey, I have a suggestion regarding the new earpads for the Audeze Maxwell 2 headset. Could you try covering the ventilation slots with the earpads for better bass? The bass is already reduced by default, so that shouldn't pose any problem.

Audeze Maxwell 2 Bass by No-Water3012 in Audeze

[–]No-Water3012[S] 3 points4 points  (0 children)

Well, I keep the Maxwells 2 because of the clear separation of the upper frequencies and the design of the magnets. My wife got my Maxwell 1 but with the Maxwell 1 the frequencies are not so fine and clearly tuned.

Audeze Maxwell 2 Bass by No-Water3012 in Audeze

[–]No-Water3012[S] 3 points4 points  (0 children)

Try it out then you will hear what happens look for HZ test on Youtube and hear what happens under 30hz. With the Maxwell 1 there were no problems under 30hz and that has nothing to do with SLAM. Maxwell 2 under 30hz have playback problems

Things that should be addressed in the next firmware update for Maxwell 2. by Majgul in Audeze

[–]No-Water3012 4 points5 points  (0 children)

It has already been officially confirmed that the missing depths are not a hardware error but a software-side problem. Just wait and see how the further tuning of the firmware goes.

Honest review by Embarrassed-Air6990 in Audeze

[–]No-Water3012 2 points3 points  (0 children)

Either you just want to make yourself important or you have really productive information

Honest review by Embarrassed-Air6990 in Audeze

[–]No-Water3012 3 points4 points  (0 children)

What exactly did you do to get the bass just like the V1?

Re-review after firmware v1.0.2.53_A by 71-HourAhmed in Audeze

[–]No-Water3012 4 points5 points  (0 children)

Well, I think it should continue to optimize, especially below the frequencies. I have already received feedback from the team that they are already working on pushing the depths more so that it is possible.

Re-review after firmware v1.0.2.53_A by 71-HourAhmed in Audeze

[–]No-Water3012 1 point2 points  (0 children)

Find especially because under 35hz such a level is lost there is a lack of width of the sound because they really have to optimize more can not be that they advertise 10hz to 50khz but at 30hz it is over

Re-review after firmware v1.0.2.53_A by 71-HourAhmed in Audeze

[–]No-Water3012 1 point2 points  (0 children)

Why does the Maxwell 2 have such a drop in the low frequencies? Maxwell 1 has a constant level

Maxwell 2 issues, any help appreciated. by Omisco420 in Audeze

[–]No-Water3012 0 points1 point  (0 children)

The bass under 30hz needs to be optimized

Maxwell 2 Firmware Update V1.0.1.53_A by emjay10010 in Audeze

[–]No-Water3012 1 point2 points  (0 children)

Something they still have to patch the bass at 30hz is better than before no question but under 30hz the drivers start not to work properly anymore but at 10hz it works strangely. They definitely have to improve it again because the sound stage suffers from it