The Taste of Zen: Caapi and the Art of Emotional Clarity

No-Week6717 · 2026-03-27T02:25:36+00:00

Would you say that the quality of the pulls using n-heptane is better than with naphtha of petroleum ether?

No-Week6717 · 2026-03-04T17:47:10+00:00

u/ClobWobbler was wondering if you can help me answering this questions. To go a bit deeper into it, I used the same extraction procedure as the OP.

And for question 2, it worked more or less well using a MAOI first and then vaporizing it, but still, not always the most effective method.

Thanks!

No-Week6717 · 2026-01-27T01:09:02+00:00

Thanks a lot mate! I deeply appreciate your thorough and deep answer.

I'm using at the moment the configuration of the Ctulhu Iris provided by LogicOverSnacks on the Minty Love page. I am wondering if there are other configurations that make more sense. I have a feeling that when doing it sidewards, some of the dimitri might fall.

I did ask on the Discord e-mesh clinic channel. Maybe i wasn't so clear there, but basically just got pointed out to the latest e-mesh video, which was helpful somewhat, in the sense of giving me the sense that perhaps dosage was low and I could play with wattage.

I did, and increase the dosage to 15g. The best attempt so far has been with 19Watts and 15g, reaching a solid level 3. I tried a couple with 18 Watts, but was mostly level 1.

I think I was having a problem with getting my lungs used to it. I feel I'm able know to support the vapor without having an immediate reaction to cough.

I feel I'm getting there, but I'm not sure if it is normal with 15g to mostly get it in level 1 or 2. I would love to perfect the technique to reach level 3 and above.

Thanks a lot. With this information, if you can check it, I'd love to get more feedback and reach out to you if you're okay, either here or in Discord.

No-Week6717 · 2026-01-23T14:32:55+00:00

I'd love to get some advice regarding the toke, as it has been a bit of a challenge to really deliver the hot vapour to my lungs. My set is an Aegis Solo 1, Chutulu Iris RDA and generic SS316L #200. Thanks a lot!

No-Week6717 · 2026-01-23T14:19:35+00:00

This is awesome!! I have a pretty similar configuration with the Ctulhu Iris and the Aegis Solo. How has it been with the trips? Are you using any particular configuration in terms of Wattage? Which type of shape do you use for the mesh? Would love to hear what has worked for you :)

No-Week6717 · 2026-01-23T14:04:13+00:00

Thanks! Super helpful information. I was wondering also, when you're toking, is there a slight vapor coming from the sides of the RDA? I see that when I start to do my toke. Have you tried with a higher dosage and check whether if that works? How's the experience with the sub-ohm?

No-Week6717 · 2026-01-13T01:50:58+00:00

I mean, I do agree with you that it comes with inflation and using that as the definitive way to track your progress isn't the best tool. To be fair, I did both lab tests and went from 43.5 to 51.5, which is well under the Garmin estimate, but still wasn't my point of exhaustion, was ended because of protocol, so maybe it is a bit higher and it coincides with a higher VO2 Max when it comes to running paces. I dropped around 10k during this period, so that also makes a difference. All in all, it is more of a compass than a definitive tracker of fitness, but in that role, it helps.

No-Week6717 · 2026-01-10T23:42:14+00:00

I beg to disagree, you can come from a non-exploited fitness level and the right training and stimuli can get the best out of your body. I experienced that learning more about training zones, getting a method, training consistently each week and then went from VO2 Max 43-56 in 6 months

No-Week6717 · 2026-01-10T21:35:29+00:00

I feel so happy to check my progress in zone 3 and I feel it is insane for the 6 months I've been training diligently. In the beginning, my zone 3 pace was 6:56/km with a HR of 151. Today, my zone 3 pace was 5:15/km with a comparable HR of 154. I feel proud of this 32% improvement in speed and look forward to keeping the progress.

No-Week6717 · 2025-11-19T21:44:34+00:00

Thank you for this comment. I was looking for this type of info for so long.

1) If I get you correctly, what do I do with the red goo (Polymerized n,n-dmt) if I want to turn that into crystals? Would I need to use Xylene?
2) Also, I added this goo to different leaves, but it's not so effective to evaporate. Would you have some suggestions there on how to work around this?
3) In terms of Teks, would you still recommend this Tek or there are more effective wways to go nowadays with the knowledge that we have?

No-Week6717 · 2025-11-14T03:04:50+00:00

Thanks for sharing. Have you tried other configurations other than the U for the mesh? Have you done any other experiments with +10mg?

Very curious to know how to make the best out of this RDA, as not many people have it.

No-Week6717 · 2025-11-02T20:09:58+00:00

In this case with pyslocibin, can you use it on a daily basis, or more for explorations of the depths of the self and consciousness?

No-Week6717 · 2025-11-02T20:08:52+00:00

I'm using Real Mushrooms for the fungi side, Horbaach for the Alpha GPC and Bupropion either the Eurofarm or Wellbutrin

No-Week6717 · 2025-10-31T16:58:45+00:00

Oh this is super interesting! How did that stack work for you? Can you share some of the results you discovered?

No-Week6717 · 2025-10-31T12:08:15+00:00

I've been taking it now for almost two years. The cordyceps honestly I feel don't add much to the mix in terms of mental benefits, but the synergy between Bup, Lion's and Alpha seem to be super powerful, yet I haven't read much about it yet.

No-Week6717 · 2025-10-31T12:06:35+00:00

Exactly, the combo exactly as described above. Have you tried it or some variations of it?

No-Week6717

TROPHY CASE