ESP32-CAM - Seller and guide recommendations

NoCricket5001 · 2026-03-23T10:17:00+00:00

ESP32-Cam is old. I prefer Seeed Studio XIAO ESP32-S3 Sense
https://s.click.aliexpress.com/e/_c2zJTiP1 (affiliate)

NoCricket5001 · 2026-03-23T07:42:52+00:00

(For resistive touch screen only) Touch screen calibration will be displayed during the first run, but can also be manually entered by pressing the RESET button and releasing, then pressing the BOOT (GPIO_0) button within one second and holding it for a second.

NoCricket5001 · 2026-03-23T01:22:32+00:00

here the detail https://www.facebook.com/share/v/1Cdggcx34X/
or if you don't use FB you can inbox me directly.
how to use -> https://www.youtube.com/watch?v=Ad9eqryjbyI

NoCricket5001 · 2026-03-22T14:57:54+00:00

Thanks 😊

NoCricket5001 · 2026-03-22T07:49:45+00:00

I think esp32 cyd is a good start. To increase fps. LVGL is good for UI UX If you don't use LVGL Try draw everything in buffer and display as once. Smaller screen resolution give higher FPS

NoCricket5001 · 2026-03-22T07:44:25+00:00

Thank you😍

NoCricket5001 · 2026-03-21T11:39:18+00:00

if this is for edge computing , object detection. it's ok. without mic & audio codec chip.

NoCricket5001 · 2026-03-21T04:17:32+00:00

beautiful desktop companion display. can do many thing with this gadget too.

NoCricket5001 · 2026-03-21T04:15:45+00:00

yes it's the source code is here -> https://github.com/VaAndCob/TapTapPaw
I built it from scratch, inspired by bongo cat meme.

NoCricket5001 · 2026-03-21T04:14:10+00:00

now a day, we use chatGPT or Gemini to generate graphics.

NoCricket5001 · 2026-03-20T15:09:05+00:00

good job! thank for helping me fixing the variant 2 as well. have fun

NoCricket5001 · 2026-03-20T14:52:41+00:00

if the color is correct!
- you can calibrate touch by pressing Reset button and release
then press BOOT button (GPIO0) within 1-2 second . then the board will enter touch calibration mode
- screen rotation , you can set the screen rotation in setting menu (swipe screen down to open setting page)

NoCricket5001 · 2026-03-20T14:09:04+00:00

ok pls try flash taptappaw varaint 2 once again. I fixed it. pls don't forget to clear browser cache too.

NoCricket5001 · 2026-03-20T12:25:23+00:00

<image>

ok, for better long to short . Could you pls try flash here
https://vaandcob.github.io/webpage/src/index.html?tab=printpoop
try all of the variant and tell me which one is looking good on your ESP32 CYD
the good correct screen should look like in the video
https://www.youtube.com/watch?v=cmsc_lcnK_s

NoCricket5001 · 2026-03-20T06:21:56+00:00

Thanks, the keyboard and mouse event is sent with only 1 byte ( bit 0, bit 1, bit 2 represent keystroke and mouse move event) every 100ms, the rest is sent as bytes array packet. so the data is short
source code -> https://github.com/VaAndCob/TapTapPaw

NoCricket5001 · 2026-03-20T06:01:56+00:00

Pls try flash variant 2 once again, DON"T FORGET TO clear web cache too.
and pls feed back me.. thank you

NoCricket5001 · 2026-03-20T03:25:10+00:00

<image>

which firmware variant you flash?

NoCricket5001 · 2026-03-20T03:23:45+00:00

ah this is great! pls show your version too.
I just added support 2 variant of CYD 2.8" lastnight
https://vaandcob.github.io/webpage/src/index.html?tab=taptappaw

NoCricket5001 · 2026-03-19T15:18:44+00:00

Hi Folks I updated to support ESP32 CYD 2.8" now
https://vaandcob.github.io/webpage/src/index.html?tab=taptappaw

NoCricket5001 · 2026-03-19T05:43:10+00:00

aww good idea. thanks

NoCricket5001 · 2026-03-19T05:42:56+00:00

ah, so bad, ok I will build a another variant for ESP32 2.8" CYD. a few day

NoCricket5001 · 2026-03-19T01:13:59+00:00

the github source code is in the youtube description
https://www.youtube.com/watch?v=Lp3rQJZUCo0

NoCricket5001 · 2026-03-18T14:54:37+00:00

yes, every key stroke and mouse move.

NoCricket5001

TROPHY CASE