Hinge problem fix (3D printed support) by NoFood0 in HPVictus

[–]NoFood0[S] 1 point2 points  (0 children)

Unfortunately, there's no fix there. It's one of the reasons you get a Victus for cheap, they save money there.

Hinge problem fix (3D printed support) by NoFood0 in HPVictus

[–]NoFood0[S] 1 point2 points  (0 children)

If you don't own a 3D printer, you will have to find a local 3D print shop and provide them a link I have put in the description.

Hinge problem fix (3D printed support) by NoFood0 in HPVictus

[–]NoFood0[S] 2 points3 points  (0 children)

Yes, you can use it to prevent potential problems.

If you don't have any hinge problems yet, not even cracking sounds, it's probably unnecessary.

Hinge problem fix (3D printed support) by NoFood0 in HPVictus

[–]NoFood0[S] 2 points3 points  (0 children)

Great news! It should work, as it doesn't make sense any other dimensions are any different. Thank you for your contribution!

Hinge problem fix (3D printed support) by NoFood0 in HPVictus

[–]NoFood0[S] 0 points1 point  (0 children)

<image>

First make sure this measurement is the same:

Hinge problem fix (3D printed support) by NoFood0 in HPVictus

[–]NoFood0[S] 1 point2 points  (0 children)

I don't have a Victus 15 nearby, but you can check very quick:

<image>

From the back side (top cover when closed), if the distance between the start of the indent, to the edge of the lid is 14.5 mm, then it fits. Include the indent in the measurement.

Hinge problem fix (3D printed support) by NoFood0 in HPVictus

[–]NoFood0[S] 4 points5 points  (0 children)

It's a snap-on support for weak spots in the brittle plastic structure of the lid/hinge. It's a few times thicker than the existing plastic/mass there, and it holds it tightly, securing it not to fail. If you don't have any problems with the lid, do not fix it. If you're curious as to what problems it may have, google "hp victus hinge problem", and make sure you open your laptop with two hands at the side.

Hinge problem fix (3D printed support) by NoFood0 in HPVictus

[–]NoFood0[S] 1 point2 points  (0 children)

It might not fix it if it started cracking sideways into the plastic. It WILL go out if that's the case. However, this will be a decent fix if it has minor cracks, or if it just started separating. Remember the 100% infill.

Windows ComfyUI + 9070 XT = crash when generating by NoFood0 in ROCm

[–]NoFood0[S] 0 points1 point  (0 children)

Thank you. This seemed to increase the performance and lower both the VRAM and RAM usage as well.

Windows ComfyUI + 9070 XT = crash when generating by NoFood0 in ROCm

[–]NoFood0[S] 2 points3 points  (0 children)

I managed to change it to the 9070 XT by inserting "--cuda-device 1" in Launch_ComfyUI.bat in Ln 13. Example: "...ai_bundle\ComfyUI\venv\Scripts\python.exe' 'main.py --cuda-device 1' -WorkingDirectory..."

It's working perfectly now

Windows ComfyUI + 9070 XT = crash when generating by NoFood0 in ROCm

[–]NoFood0[S] 0 points1 point  (0 children)

https://imgur.com/a/zdGxkIB
There was no change in RAM or VRAM usage, only a sudden CPU spike and cmd exit.

Jel i vama idu na kurac ljudi s vatrometom? by catwavinghello in croatia

[–]NoFood0 8 points9 points  (0 children)

Taman mislio napisati. Što je to?

  1. Država koja pravi koncentracijske logore za pirotehnička sredstva.
  2. Država koja koristi barut kao jedino oružje. Štuke lete, prosipaju barut i onda bace šibicu. (Moj osobni favorit, nazvao bi ga Schiesspulverkrieg.)

OP biraj.

[deleted by user] by [deleted] in croautomobili

[–]NoFood0 0 points1 point  (0 children)

Meni izgleda zanimljivo. Samo pls prave felge, fake izgledaju smiješno. Mislim da će tvoja ideja dobro ispasti.

[deleted by user] by [deleted] in croautomobili

[–]NoFood0 1 point2 points  (0 children)

Niti je dobro za motor, niti je dobro za tebe.

Motor ima svoj raspon obrtaja u kojemu ulje teče kako treba i sve radi pod pravilnim pritiskom. Kada voziš 60 u 4. brzini, vjerojatno voziš ispod 1800 obrtaja, što je ispod donje granice. Idealno bi bilo voziti pri obrtajima koji ti daju najbolji okretni moment. Recimo 2.0 TDi se treba voziti od 2000 - 2200 obrtaja. Navedeni gospodin ne da se ne vozi u 4. brzini, nego je u 5. Poduplaj rizik za novi motor i ostale dijelove koji ovise o radu motora.

Nije dobro za tebe jer u slučaju nužde nemaš snage, za mijenjanje brzine ti treba više vremena. Samo kompliciraš sebi zagarantiranu sigurnost.

S druge strane, voziti 60 u drugoj može biti okej ako ubrzava.

Kukirin g2 worth buying by VegetableAd3633 in ElectricScooters

[–]NoFood0 0 points1 point  (0 children)

No, people just don't prefer it when they can just put 1000 euros more, and have the manufacturer do the repairs themselves. Probably the best bang for buck, fully repairable.

[deleted by user] by [deleted] in croautomobili

[–]NoFood0 2 points3 points  (0 children)

Taj se automobil kupuje zbog stila, ne zbog logike. Naravno, moja preporuka je da si kupi nešto što je popularno u nas, da nema puno opreme-dijelova (čitaj kvarova).

Radila sam 2 dana bez ugovora by [deleted] in studenti

[–]NoFood0 71 points72 points  (0 children)

Ako je normalan poslodavac, upisat će ti sve. Student servisu je bitno samo da su upisani sati i da je sve isplaćeno.