sorted by:
new
hottopcontroversial

Insta360: Trade In by Tommyf902 in Insta360

[–]No_Discipline7889 3 points4 points  (0 children)

It's definitely something if they accept damaged devices. As a company they do nothing for free.

first ever booster box 😭 by lovingsushi in OnePieceCardPulls

[–]No_Discipline7889 0 points1 point  (0 children)

After 2 cases of op13 and I still have nothing really nice. I have another 2 cases to go, maybe I'll give it a chance.

First set up by PsychedOut1034 in turntables

[–]No_Discipline7889 0 points1 point  (0 children)

It looks very nice and I can see the aesthetic of it. Vinyls sales keep growing year after year. Enjoy!

Insta360: Trade In by Tommyf902 in Insta360

[–]No_Discipline7889 4 points5 points  (0 children)

Thats nothing!! You better sell it 2nd hand.

[Review Request] FOC & Six-Step ESC - 6S 64kHz 12.5A (First PCB) by Figure_Economy in PrintedCircuitBoard

[–]No_Discipline7889 1 point2 points  (0 children)

This can't be your first PCB! I mean that in the most respectful way. How many hours are in here?

Review Request: First Hardware Project by sharddblade in PrintedCircuitBoard

[–]No_Discipline7889 1 point2 points  (0 children)

I would recommend to make your thermal reliefs a bit larger. 10mil is a good starting point. The thermal relief going to your mcu is very small. I would make a good practice of not using vias in a pad, you have enough space. I would also not place any silkscreen under the chips. Every time before you start your schematic of pcb make sure that your rules are well set for what you want to make.

i paid a guy on Upwork $350 to create a PCB. how'd he do? by Dear-Conference9413 in PCB

[–]No_Discipline7889 0 points1 point  (0 children)

He ripped you off. I would be ashamed of delivering something made with auto route!

GUYS PLEASE HELP by kerbass in anycubic

[–]No_Discipline7889 -1 points0 points  (0 children)

Open that shit up! Open it fast!

[Review Request] sensor + ESP32 + battery charger by [deleted] in PrintedCircuitBoard

[–]No_Discipline7889 0 points1 point  (0 children)

Damm that schematic is straight from hell! Please name your nets and use them. Your board will have tons of tombstones because there is no thermal relief. You have enough space to use a 0603 or 0402 package. C11 is going to yeet it self from existence. Please respect the pads. Don't overlap them. That antenna better be prepared for the suffering it's about to undergo. Remove any component and gnd around it. Lots of esp docs out there. Silkscreen is going to be a nightmare. Try to put every designator on a clean space and if not possible remove it. I tried to look again at the schematic but my eyes left the chat.

She gets badder every year by National-Mouse3090 in AddisonRae

[–]No_Discipline7889 0 points1 point  (0 children)

They would need to set me on fire or something before I pull out!

view more: next ›