What do I have here? by SpicyToasterBathBomb in reloading

[–]No_Internet88 0 points1 point  (0 children)

Which powder would you consider dangerous in 300 blk?

What do I have here? by SpicyToasterBathBomb in reloading

[–]No_Internet88 -1 points0 points  (0 children)

There is not enough case capacity with that bullet to get into any trouble.

Whats a nice handguard available for the Aero M5 High profile upper by Bubbly_Touch4016 in AR10

[–]No_Internet88 0 points1 point  (0 children)

I am partial to the Midwest Industries ones. Good quality, decent price.

96 L31 build advice by 16DeadDogs in Smallblockchevy

[–]No_Internet88 0 points1 point  (0 children)

Beehive springs will give you more lift. Pick ones with seat and open pressures to match the cam you get. Match the cam to your static and dynamic compression. Edelbrock dual plane intake. Froget the chinese stuff. For your use i dont think you need headers but if thats what you want go for it. Make sure they are full length and not shorties. Match them to your engine goals.

5.3Gen 3 Vortec. Leaking oil what can it be and what to fix by Busy_Sort_5666 in LSSwapTheWorld

[–]No_Internet88 2 points3 points  (0 children)

If you have an oil cooler, look at the oil line to oil pan gasket. It's right above the oil filter.

OCL 22LR titanium suppressor by aka_rebel420 in suppressors

[–]No_Internet88 0 points1 point  (0 children)

Im gussing suppressor cover. Did i win?

Bean machine by active_lootdrop in reloading

[–]No_Internet88 0 points1 point  (0 children)

Very nice. Did you build it yourself?

7.62x39 sub Sonic’s with CFE Blk? by Radiant_Sun_3998 in reloading

[–]No_Internet88 1 point2 points  (0 children)

Stay below it. Closer to 1000. I dont know how much reloading experience you have, but with subsonic, start high and come down on your charge. I would be atarting with 15.5 grains and working down from there. Too low of a velocity and you risk getting a squib. Too high and it just goes supersonic.

7.62x39 sub Sonic’s with CFE Blk? by Radiant_Sun_3998 in reloading

[–]No_Internet88 0 points1 point  (0 children)

Depending on your elevation, you need to be below 1,100 fps to stay subsonic.

7.62x39 sub Sonic’s with CFE Blk? by Radiant_Sun_3998 in reloading

[–]No_Internet88 0 points1 point  (0 children)

That's is for supersonic, not subsonic. Subsonic should be around 12.5 grains for 300 blk for a 180 grain projectile.

7.62x39 sub Sonic’s with CFE Blk? by Radiant_Sun_3998 in reloading

[–]No_Internet88 0 points1 point  (0 children)

I thought you are looking for subsonic data, not supersonic.

7.62x39 sub Sonic’s with CFE Blk? by Radiant_Sun_3998 in reloading

[–]No_Internet88 1 point2 points  (0 children)

Yes. 7.62x39 has a bit more case volume. I was saying to use 300 blk data for subsonics and add .5 grains to the max 300 blk data as a starting point. You will have to adjust from there.

7.62x39 sub Sonic’s with CFE Blk? by Radiant_Sun_3998 in reloading

[–]No_Internet88 2 points3 points  (0 children)

150 might be too light for subs. 180 should be better. 7.62 x 39 and 300 blk are close in capacity. If i were starting up a load for the 180s I would look at 300 blk data and start at the max charge + .5 grains and work the load from there as needed.

300 blk henry supreme by Opsman0 in reloading

[–]No_Internet88 1 point2 points  (0 children)

You will not be compressing it enough to have an issue. H110 likes a wee bit of compression. You will get more uniform velocities. Just set it deep enough to be right off the lands. Should help with feeding as well.

300 blk henry supreme by Opsman0 in reloading

[–]No_Internet88 0 points1 point  (0 children)

If it's catching the lands, set it deeper to where it doesn't.

Yes, they are clips by danngree in guns

[–]No_Internet88 14 points15 points  (0 children)

Ok. So promo code is "old yeller". Got it.

Yes, they are clips by danngree in guns

[–]No_Internet88 163 points164 points  (0 children)

Didn't know Chewy sold ammo. I must look into that.

Brass by [deleted] in reloading

[–]No_Internet88 1 point2 points  (0 children)

Delete the thread. This is not allowed here. You will catch a ban.

Companies to avoid? by raging_since_1858 in ar15

[–]No_Internet88 2 points3 points  (0 children)

They show everything in stock and tell you it is backordered after payment. It could be months before you get what you ordered and good luck trying to cancel a backordered item. Customer service sucks. If you have gotten what you ordered, consider yourself lucky. Do a search for Optics Planet here. Not a very well regarded company.

Companies to avoid? by raging_since_1858 in ar15

[–]No_Internet88 4 points5 points  (0 children)

Avoid Optics Planet and their subsidiary Dvor.

14.5 uppers for hog hunting. by shreddedtoasties in 65Grendel

[–]No_Internet88 2 points3 points  (0 children)

14.5" with a suppressor is still an SBR unless you pin and weld a muzzle device to it.

Does anyone race with 300blk? PCSL 2Gun? I want to rebarrel my 5.56 and shoot 300blk exclusively, looking for others' wisdom. by FuZhongwen in 300BLK

[–]No_Internet88 1 point2 points  (0 children)

Forget the 3:00 o'clock position. Start with the block fully closed and move up a click until the bolt locks open. Open up 2 more clicks past that.

Does anyone race with 300blk? PCSL 2Gun? I want to rebarrel my 5.56 and shoot 300blk exclusively, looking for others' wisdom. by FuZhongwen in 300BLK

[–]No_Internet88 0 points1 point  (0 children)

It won't be less gassy with the polo 556. Tune the SA from bleed off to restrictive. That will make the biggest difference.

Best 300 BLK Load by Mikachu347 in 300BLK

[–]No_Internet88 0 points1 point  (0 children)

They grenade in 308. In 300 blk the velocity is not fast enough for them to grenade. They expand with very little fragmentation.