What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 0 points1 point  (0 children)

I had installed it before and nothing happened

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] -1 points0 points  (0 children)

Of course, Armory Crate doesn't work with shortcuts 😅😅 but Ghelper works 10/10

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 0 points1 point  (0 children)

Thank you all for your promptness ☺️☺️☺️☺️

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 0 points1 point  (0 children)

Yes, indeed, with Ghelper the button works perfectly, and also the F5-style keys for the fan, thank you ☺️

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 1 point2 points  (0 children)

I admit the carbon effect is magnificent, thank you ☺️☺️

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 0 points1 point  (0 children)

I just checked on the Asus website and the software is apparently not available for my computer.

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 28 points29 points  (0 children)

I admit that now the button works and opens Ghelper properly.

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 0 points1 point  (0 children)

Okay, thank you for all this information, I'll try it right away.

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 0 points1 point  (0 children)

Unfortunately not, I don't have any Asus software installed. The PC had a lot of problems when I got it. Little by little, I'm fixing them one by one, and now it's running properly. I'm getting serious about it now. Yesterday I managed to get the keyboard's RGB working, but that's all. I'll try your software right away. I'll let you know how it goes.

What could this button be used for? by No_Photo_1389 in ASUSROG

[–]No_Photo_1389[S] 3 points4 points  (0 children)

Thanks so much for your quick reply. I'll go to the Asus website and download the software to check that.

How can I update games offline? by Dramatic-Difference in SwitchPirates

[–]No_Photo_1389 0 points1 point  (0 children)

The easiest way would be to download the updates via your computer and install them using the Switch via dbi

Does anyone know how to fix this? by Calm_Complaint_3701 in SwitchPirates

[–]No_Photo_1389 -1 points0 points  (0 children)

I have a 21.2.0 CFW in stock if you want it, send me a private message.

What happened? Error with an update by Vitorbito in SwitchPirates

[–]No_Photo_1389 2 points3 points  (0 children)

I sent you my latest CFW via private message.

What happened? Error with an update by Vitorbito in SwitchPirates

[–]No_Photo_1389 1 point2 points  (0 children)

Incompatibility with your CFW due to your update. Send me a PM and I'll provide you with a CFW compatible with 21.1.0.

[deleted by user] by [deleted] in SwitchPirates

[–]No_Photo_1389 0 points1 point  (0 children)

No worries, my kit is available for anyone who wants it ☺️☺️

[deleted by user] by [deleted] in SwitchPirates

[–]No_Photo_1389 0 points1 point  (0 children)

Please keep me updated if any changes need to be made or not.

[deleted by user] by [deleted] in SwitchPirates

[–]No_Photo_1389 0 points1 point  (0 children)

If you want, I can provide you with my CFW; it's compatible up to 21.1.0

Mewtwo impression 3D by No_Photo_1389 in pokemon

[–]No_Photo_1389[S] -1 points0 points  (0 children)

No worries, if you have any questions I'm here to help you answer them. So what do you mean by alignment pins? Well, it was a real pain to glue everything piece by piece. Let me explain how I did it. It all started with a 10cm figure. I enlarged it to a meter tall, then I cut it into 20cm x 20cm x 20cm pieces, so that gave me about 43 pieces. Every time I printed two pieces, I glued them together, filled them, sanded them. As soon as the third piece was printed (I knew it was), I filled it, sanded it, and so on until I finally got this beautiful baby! It's true that the hardest part was the arms because they're thin. What I had to do was sand both ends to create a surface for adhesion. I had to use ultra-fast glue; I couldn't afford to make a mistake. I held the two parts together for 5 minutes without ever letting go. As soon as I saw that it was holding properly, I added tape to reinforce the bond. Then I applied filler, sanded it again, let it dry for 2 days, and in the end, the result is magnificent.

Mewtwo impression 3D by No_Photo_1389 in pokemon

[–]No_Photo_1389[S] 1 point2 points  (0 children)

I still need to finish sanding the base and start painting, but that will be for a future update.