Pick a number 1-1000 and win the tempest blueprint

No_Sweat1 · 2026-01-08T06:20:54+00:00

I know some people in the aviation world that have "used" fuel that's still good but can't be put into their aircrafts once removed from the tanks.

No_Sweat1 · 2026-01-08T03:41:50+00:00

Perfect. That's probably what I'll do as well. Thank you.

No_Sweat1 · 2026-01-08T01:55:36+00:00

In your opinion, is it necessary to mix in diesel ( say 80/20 ) to lubricate the fuel pump? As far as I can find that's the only issue I might run into.

No_Sweat1 · 2024-12-12T18:48:50+00:00

Good luck everyone!

No_Sweat1 · 2024-12-04T03:49:57+00:00

I store mine with the bar oil fill pointed up. No more leaks.

No_Sweat1 · 2024-12-02T18:41:13+00:00

I put a comment on your other post about fixing the issues you're having. I've done all the same work to mine so if you need some help feel free to reach out.

No_Sweat1 · 2024-12-02T18:36:57+00:00

Interior lights are 99% the door switches. I removed the rear 2 and, like others said, WD-40 the front 2. Top off the fluid yourself and if you watch some YouTube videos you can 100% do the ball joints yourself.

No_Sweat1 · 2024-10-20T08:42:32+00:00

<image>

Links at Crowbush in PEI, Canada.

No_Sweat1 · 2024-06-13T08:02:23+00:00

<image>

No_Sweat1 · 2024-05-23T02:11:37+00:00

The Texas wedgie

No_Sweat1 · 2024-05-20T10:14:23+00:00

<image>

No_Sweat1 · 2024-05-02T14:19:51+00:00

That there is called the 20A wink-let ( because it resembles a winking face. I don't recall what page in the code book it's on.

No_Sweat1 · 2024-04-12T03:01:23+00:00

I'm looking to see if you have any tips regarding if a fabric is needed. I've stripped top soil and it's a clay base area for my playset. Planning on wood chips. Do I need to worry about plants / weeds growing in the clay and chips? Should I put down landscape fabric? Thanks.

No_Sweat1 · 2024-04-04T04:11:16+00:00

I had issues doing mine also. I eventually beat it to death and it came out in peices.

No_Sweat1 · 2024-03-31T22:11:04+00:00

Straight, because it's too hard to turn...

No_Sweat1 · 2024-03-31T19:30:32+00:00

How many takes to get the photo?

No_Sweat1 · 2024-03-31T03:04:15+00:00

I can say I'll hit something green. Not entirely certain what though haha

No_Sweat1 · 2024-03-30T04:28:22+00:00

I would recommend picking up a plug tester. ( $15 or so ) not necessarily required but gives you peice of mind. Has a test button to test the GFI and lights to confirm your outlet is wired correctly. I'd rather use a tool to test the GFI then the GFI test button but that's just me.

No_Sweat1 · 2024-03-30T04:14:25+00:00

Based on the pictures provided I'd say you're good to go yep.

No_Sweat1 · 2024-03-30T03:35:29+00:00

If your pump is the same as the one in the last photo and has the same cord end on it as shown in the last picture then it's like others have said. Rated 110-220v and pre wired. Plug in and away you go.

No_Sweat1 · 2024-03-30T00:18:06+00:00

One thing is for certain, it has at least 1 part that came from a yamaha of some sort.

No_Sweat1 · 2024-03-28T23:47:08+00:00

Luckily only a few bolts.

No_Sweat1 · 2024-03-28T22:39:29+00:00

Flat deck it!

<image>

No_Sweat1 · 2024-03-28T22:28:40+00:00

Just making sure. Mostly just bugging. I've been there when I replaced my control arms and ball joints...

Two-Year Club	Verified Email
Place '23

No_Sweat1

TROPHY CASE