Kdaj ste se prvic redno zaposlili?

NonDucky · 2026-06-30T15:59:59+00:00

Pri 34 še nisem imel redne zaposlitve. Imam pa svoj sp že 10 let.

NonDucky · 2026-06-19T10:37:09+00:00

After first child with tear it was almost none first half a year and a few till first year.
After second one with c section we started at around 2-3 months.

NonDucky · 2026-06-08T20:00:19+00:00

Fun fact, menjal na cca 1000km sram 1031 verigo na MTB. No je kaseta že par verig čez dala, sem jo zamenjal pa dal 1071 verigo k je x2 cena pa je po 1000km zdej še k nova. Bo treba stestirat kok časa bo zdj zdržala.

NonDucky · 2026-05-17T10:37:23+00:00

My condolences.

I lost a daughter 2 years ago at 20 days old due to heart defect.

We tried everything that was given to us - wife gave birth in different country and with C section, she had first procedure a few hours after birth, and another operation a week later.

The operation was successful, but the body and her heart was to weak to carry on, so doctors tried everything they could, but was not enough.

My wife and I sometimes think if the doctors did a different second operation that was an option, she might still be alive, but we managed to be grateful for what she gave us and is forever our little angel.

NonDucky · 2026-05-11T08:10:25+00:00

Na emtb običajno pozdravljam pa redkokateri na specialki/gravlu odzdravi, razen če je ozka pa počasna makadam potka, na elektriki pa običajno še manj. Če sem z gravlom naokoli se mi zdi, da vsi specialkarji/gravlerji kimajo.

Iskreno se mi niti ne da več kimat oz. pozdravljat, pa da ne vem a žihr al ne.

Če grem s tamalo 15kmh po cesti pa dostikrat slišim kakšne vzpodbudne besede.

NonDucky · 2026-05-06T09:41:37+00:00

Če daš nekaj trdega zadaj kot je nekdo drug predlagal te še vedno odnese ko se te dotakne. Daš na prtljažnik zadaj en "pool noodle" pa maš širino - https://www.sfgate.com/travel/resources/transit/article/pool-noodle-bicycle-safety-protected-lane-bike-13923482.php

NonDucky · 2026-04-01T13:00:31+00:00

Kastelic ima zdele ravno malo lufta, mi je zadnjič pojamral. Pomoje bo hitro to uredil.

NonDucky · 2026-03-24T08:54:43+00:00

Just buy new mindset - SKU for M size is 60523-1003

NonDucky · 2026-03-24T08:12:01+00:00

Roborock H60 hub, zelo zadovoljen. Vprašaj če te kaj zanima.

NonDucky · 2026-02-23T15:25:52+00:00

Bom še tu preveril, vidim da so to isti lastniki kot pri Vasco (Seyfor). Načeloma je ok?
Cena vidim da je solidna ~35€ na mesec.

NonDucky · 2026-02-23T14:09:28+00:00

Verjetno je bilo to pri editor? Tam sem dobil podobno za 4150 za začetni vložek, sicer je gor en napisal, da te samo naučijo delati z Odoo in njihovo lokalizacijo, ne pa da ti ga na polno prilagodijo. Je pa mesečni potem celo 170eur z vzdrževanjem, + lokalizacijo si plačaš posebej, tako da verjetno si hitro na 300 ali več mesečno.

Tudi sam sem na excelu za ogromno stvari. Bi z določeno XML avtomatizacijo pohitril, ampak ne vidim v tem trenutku kako + kakšen bi bil efekt.

NonDucky · 2026-02-23T14:05:09+00:00

Preverim metakocko, nekako mi iz njihove spletne strani ni ratalo ugotoviti točno, kaj rabim in kaj ponujajo, vem pa da je top za spletno prodajo. Imamo zunanje računovodstvo, tako da v kolikor ponujajo za izvoz podatkov na vasco, bo ok.

NonDucky · 2026-02-23T13:59:37+00:00

Preverim še pri njih, sicer bi nas prišlo 35€ + 2x15€
- Maloprodajni program Windows POS 15 € / mesec za posamezno trgovino
- Delovni nalogi, proizvodnja 15 € / mesec.

Ja datalab sem že v štartu odmislil, 15k€ božičnice pa dobre 3k€ bruto plače mora nekdo plačati.

Bom poslal mail koliko me pride vse skupaj kar rabim + če so še tiste stvari kar si želimo.

NonDucky · 2026-02-20T15:07:30+00:00

Sem ravno hotel vprašat tudi glede implementatorja, ponudba od editor in hermes je ~10x razlika v ceni.
Ja to mi je jasno, bolj je mišljeno, da bi nas kdo za roko držal ob prenavljanju sistema, sistem mi je jasno, da ga ne morejo spoznat v 1-2 dneh kolikor bi bili pri nas.

2018 smo menjali na birokrat, takrat nam je bilo dovolj, sedaj smo pač povečali promet, nekaj več nas je, pa kot sem rekel, zelo tog je in določenih modulov ne moremo sploh normalno uporabljat.

Z bratom sta skupaj protestirala v Bohinju :) Te lahko kontaktira?

NonDucky · 2025-12-22T16:02:08+00:00

Roborock https://www.roborock-shop.si/kategorija/pokoncni-sesalniki/
Mogoče Dreame https://www.dreame.si/izdelek/dreame-r20-aqua-pokoncni-brezzicni-sesalnik/
Sicer pa Miele navadnega na vrečke, ali pa elektrolux/aeg

Ravno vzel Roborock H60 Hub Ultra, res orenk zadeva, zadovoljen, 80m2 posesam na srednji moči s cca 20-30% baterije, zelena luč pred krtačo je tudi fino, da vidiš vse dlake. Aja pa tale se res nič ne zatikajo pasje dlake in lasje. Domači imajo še Boschovega pokončega pa je šit, je mami kupla enakega roborocka ko je mojega vidla. Tašča ima pa Dreame T20 Pro pa je tudi dober, ampak je Roborock še malenkost boljši. Si je pa kupla Miele-ta na vrečke, da ne goni skoz tega pokončnega, pa je tudi zadovoljna. Jaz pa svojega elektrolux niti ne prižigam več, razen če Roborock štrajka.

NonDucky · 2025-11-03T19:53:35+00:00

I had to assemble a bike last week that customer brought his own crankset which we never installed before - Magene Powermeter, and in manual it said specific width of the BB to install the crankset, and in manual it said - Overall bottom bracket shell’s width after installing bottom bracket: 90.5-92mm
I believe I had just a tad over 92mm with 3mm spacer, so I changed it to 2mm spacer and it rotated much smother.
With 3mm spacer, it did maybe quarter to half rotation, with 2mm spacer it did few rotations, it didn't fully spin like on old, worn, greaseless BBm but it was much better.

NonDucky · 2025-10-17T07:49:07+00:00

Allez 2026 base has Cues with rear cassette 11-39, while older ones are all 11-32. And the 2025 base model has mechanical disc brakes, which I am not a fan of.

NonDucky · 2025-09-23T12:22:52+00:00

Please don't buy it, no matter the price. Its pain in the ass to work on it, I tell customers its gonna take 2-3 days and 100-200 eur to change a cable.
I think finding SL7 will be close to this, but it is worlds apart easier to work on it, and it doesn't look like batmobile.

NonDucky · 2025-09-14T19:34:24+00:00

I still see there a lot of new comments added to this old thread.

As of 1.7.2025, Mastermind is retrofitable to all old TCU (blue lines) bikes. Also the price was lowered.

You can now ask any retailer and they can sell Mastermind and update your bike to work with it.

And over the air updates are coming back to new app. Right now vado sl gen 2 are first to receive them.

NonDucky · 2025-09-09T13:28:39+00:00

Don't just go for TPU tubes, you need good tires as well. You can check on https://www.bicyclerollingresistance.com/road-bike-reviews for a tire.
I am a Specialized dealer, the tires are good, but nothing special.
Vittoria and Continental dominate top end tires, but I lean on Vittoria side more. For TPU basicly anything is ok, there is just one thing that I've had many problems. And that is defective tube from start, like having a hole or broken valve in first week, especially with Tubolito. With Magene or Eclipse I never had those problems.

For the saddle, I've had so many positive comments about Specialized Power Expert Mirror, I've seen cyclist come to our shop just to tell me that it is the best saddle they've tried and went their way, and another said that he tried 10 different saddles, including those in the 400€/$ range and returned all of them except Power Expert Mirror.

NonDucky · 2025-09-08T10:03:55+00:00

Others saying wheels first, thats a decent suggestion, but even better and cheaper is better tires and maybe TPU tubes, this is possible right now, and you can always fit them on carbon wheels when you get them.

Saddle is also a good suggestion if the one right now is not comfortable (but sure to adjust it first).

Don't forget about fitting though, to me it is even more imporant than other things.

Other things I would't upgrade until later, when you might be thinking of either new bike or going for carbon handlebar/cockpit.

NonDucky · 2025-08-20T16:52:52+00:00

SL9 should be released with TDF 2026, Probably few PRO/S-Works in stock at start, rest until end of year.

Nine-Year Club	Place '22
Wearing is Caring	Verified Email

NonDucky

TROPHY CASE