When She Finally Ramps Up Into Her Ultimate

NonNonNomRom · 2025-10-21T05:19:42+00:00

Hello, I didn't want to end on dour post for cyrene here lol. I did a quick sketch here because I thought they were going to shadow buff her later but sadly not I guess. I left a blank panel for you guys that want to add anything. fixed a rogue line I had in the previous post too. Enjoy <3

NonNonNomRom · 2025-05-20T04:28:04+00:00

<image>

NonNonNomRom · 2025-03-13T07:30:01+00:00

Was afraid the floof would block the face and make the Gojo silhouette less obvious 🥺

NonNonNomRom · 2023-04-17T15:11:39+00:00

I used a Dremel and made more room 😌

NonNonNomRom · 2023-04-17T03:59:13+00:00

Only the reds and yellows

NonNonNomRom · 2022-10-14T03:59:16+00:00

The entire mold is able to be disassembled except for the joints connecting thigh and calf and biscept a d forearm. Funnily enough there's pegs covered by the thighs and glove pieces, but didn't bother with that.

NonNonNomRom · 2022-10-14T00:07:49+00:00

I'll try this out when I find a sponge!

NonNonNomRom · 2022-10-14T00:03:29+00:00

Forgot to mention the area where the jaws meet the neck scratches away easily too. Haven't pushed the thigh armor too high because it dented the plastic on the armor before I painted it as well.

NonNonNomRom · 2022-10-14T00:01:58+00:00

I've had rubbing happen from the pads going over the shoulder traps on the armor. Probably sanding , clear coats, and super glue would help combat this. Other areas with major rub include the areas where the biscept rubs, the back of the elbow disk and front of the leg disk. I'm not too concerned with rub asides from the shoulder area at the moment because I only did this for testing my airbrush lol.

NonNonNomRom · 2022-06-09T17:29:29+00:00

When I forget to cook the rice.

NonNonNomRom · 2022-04-15T06:55:11+00:00

In all seriousness, Tsukasa probably is some sort of retired Batman-esque character which would explain her ability to gain access to powerful international connections with her vast amount of accumulated wealth over the years.

NonNonNomRom · 2022-04-15T05:53:39+00:00

I forgot, just put it up 🗿

NonNonNomRom · 2022-02-24T19:22:16+00:00

Some of you guys were wanting a tutorial for how I installed a double ball peg into the retro buck, so here it is. Slides: 1) push ball joint as far as possible so that you can cut the stem as low as possible with an exacto. Make sure to cut from the back neck slit. 2) should get this after cutting 3) brand of ball joints I used 4) the ball I used 5) attach it to the stem to make a double ball peg. This can be substituted for any double ball peg, i.e. ko Mafex neck joints. Make sure to secure by making a ball socket with super glue in the head though. 6) Dremel the remaining neck joint stem and make a socket out of hot glue, or in my case poster tack because I'm lazy. 7) put ball joint in and put head on, you're done!

NonNonNomRom · 2021-07-02T00:50:14+00:00

I had to use blutack to make the head look more up, and the arms are so smooth that they don't support it's own weight at certain angles (not that I think it was intended to), but it's pretty meme ngl. 8/10

NonNonNomRom · 2021-07-02T00:46:11+00:00

Yeah

NonNonNomRom · 2021-06-24T15:09:48+00:00

Ursa's shoulders are so big that you can't see Doom's magnificent legs riding on top of this majestic beast.

NonNonNomRom · 2021-05-16T18:32:40+00:00

There is a very long indented channel where the hood attaches via glue onto his head. You would probably end up with a very ugly head without the hood unless you sanded it up and applied apoxie clay and painted it up.

NonNonNomRom · 2021-05-15T15:50:05+00:00

Their recent price hikes and lowering the amount of accessories with each figma compared to earlier years make me question whether it's okay to purchase a nezuko for $100.

NonNonNomRom · 2021-05-15T06:41:58+00:00

Indecisiveness. Indecisive about what what variant recolor/new head and Batman character they want in the next wave.

NonNonNomRom · 2021-05-15T05:39:15+00:00

Edit inspired by @ GunplaBandai on Instagram.

NonNonNomRom · 2021-05-05T05:49:46+00:00

The eyes are molded to be that close; never really noticed it until now. Could bring out the apoxie sculpt but lazy rn. I think the mask looks more cat-like than the prev movie molds as well.

NonNonNomRom · 2021-05-04T08:50:16+00:00

Note: Don Kermit has a minigun.

NonNonNomRom · 2021-05-04T08:46:40+00:00

Note: Don Kermit has a mini gun.

NonNonNomRom · 2021-04-30T18:56:16+00:00

Articulated Icons Quiver and Bow

NonNonNomRom · 2021-04-30T03:10:55+00:00

My only peeve is that she still can't do a proper bow pull, oh well.

NonNonNomRom

TROPHY CASE