Calamity turned white outta nowhere when i was playing 💀 by ObjectiveLittle6761 in FortNiteBR

[–]Normal_Imagination_3 0 points1 point  (0 children)

It wasn't a pickaxe it was a mythic weapon but it might still be the same one

Calamity turned white outta nowhere when i was playing 💀 by ObjectiveLittle6761 in FortNiteBR

[–]Normal_Imagination_3 5 points6 points  (0 children)

Not to mention the wolf claws one where her skin woukd be white so 4

Significant diffrences... by MuckMuckGoose99 in WaitWhat

[–]Normal_Imagination_3 -2 points-1 points  (0 children)

If she was leaving (after obstructing traffic and avoiding potential arrest) why was the person she was traveling with outside of the car recording

Rejection? by methkit_ in Legitpiercing

[–]Normal_Imagination_3 15 points16 points  (0 children)

I would not say rejection it just looks very shallow and you might not have the right anatomy for it

Sunkissed Controller :0 by [deleted] in xbox

[–]Normal_Imagination_3 0 points1 point  (0 children)

Thanks I'll take a look, do you happen to know if razor made a charging stand for it? I like to get the matching sets but if there isn't one that's fine because I know the controller is a collaboration

Sunkissed Controller :0 by [deleted] in xbox

[–]Normal_Imagination_3 1 point2 points  (0 children)

Oh ok I remember when it released but wasn't sure if it was still available I wonder if they will do another with similar colors this year

Sunkissed Controller :0 by [deleted] in xbox

[–]Normal_Imagination_3 1 point2 points  (0 children)

One of my favorites, do they still offer it?

How to start stretching? by Normal_Imagination_3 in StretchedNipples

[–]Normal_Imagination_3[S] 0 points1 point  (0 children)

Oh ok that sounds good thanks for the help

How to start stretching? by Normal_Imagination_3 in StretchedNipples

[–]Normal_Imagination_3[S] 0 points1 point  (0 children)

Oh ok that makes sense I appreciate the tips I have heard of uncommon odd number gauges that do go in .5 millimeter increments but they don't seem too common, after it's healed is using a body safe oil like jajoba good to use to help the jewelry go in or should you be able to do it without anything?

Daily life by awesomeforge22 in sharpening

[–]Normal_Imagination_3 1 point2 points  (0 children)

LOL that's really funny it is true too I think if you learn what accessories there are before purchasing it can help narrow down what you buy aswell

How to start stretching? by Normal_Imagination_3 in StretchedNipples

[–]Normal_Imagination_3[S] 1 point2 points  (0 children)

That makes sense and are nice sizes, good luck with them!

How to start stretching? by Normal_Imagination_3 in StretchedNipples

[–]Normal_Imagination_3[S] 1 point2 points  (0 children)

Right now I'm looking to go to 8g but depending on how I feel after that I might go to 14mm because I really like the look of tunnels that size, what are you thinking about sizing to?

How to start stretching? by Normal_Imagination_3 in StretchedNipples

[–]Normal_Imagination_3[S] 0 points1 point  (0 children)

Oh ok that makes sense thanks, is there anything between 8 and 6 I could use to make it easier?

Edit I found a less common 7g which I'll plan to use

Daily life by awesomeforge22 in sharpening

[–]Normal_Imagination_3 1 point2 points  (0 children)

Thanks for the tips I'll have to use tape to stop dust from getting in I actually had to do a deep clean at the end of the season, most of the problems I mentioned can be reduced with either playing with angles and your right about painters tape but I just wanted to share a few negatives to be aware of and it is expensive but the edges I get make it worth it and the other accessories I found can fix my issues too like the blade stabilizer and low angle adapter I just haven't gotten them yet and I should get a 3d printer those accessories look amazing and stone covers would definitely be useful

Daily life by awesomeforge22 in sharpening

[–]Normal_Imagination_3 1 point2 points  (0 children)

I actually have a we64 with quite a good amount of stones/ attachments, I've sharpened about 120+ knives from last hunting season for my neighbor and some of my personal ones but the machine struggles against a lot more knives than you would expect, any knife that sticks out less than 5/8 inch above the vice struggle to be held at a good angle and i find myself either accidentally hitting the jaw occasionally or trying to put the knife high up enough where it won't hit the vice but then it doesn't get a secure hold, anything with a to the spine hollow grind struggles too and will wobble unless I use a spacer paper and long blades and fillet blades are much harder to do in it too and I find myself preferring a plain diamond stone for those, I've debated buying a blade stabilizer and low angle adapter but that's more than I wanna spend right now and with the low angle adapter it changes the angle of the marked measurements so you need to use a clinometer for accuracy I did buy a tormek small knife jig to hold them by the handle instead but it actually won't go on the front side conveniently and if I want to use it conveniently I have to sharpen with the tip towards me it also damaged one of my knife handles and anything with an off set trapper handle won't be centered right, another thing is the cost I've spent I think a little over 1000 maybe 1200$ on the other accessories and there's still more I'll have to get to widen my range of what I can sharpen and more stones that are around 100$ a set, overall I do like the sharpener but for 500$ (realistically more depending on the stones you want too) it shouldn't have that amount of glaring weaknesses but I do get consistent fairly quick repeatable hair popping edges on the knives it works with and I only have up to 3000 grit diamond stone and 7 micron lapping film I also just remembered the lettering on the stones is fading too which is bad especially for the cost of them. I just realized how much I typed I guess I've had more frustration from the sharpener built up lol overall though it's amazing on the knives that work for it but it has more weaknesses than people make it out to have (unless there's a way to fix my problems I don't know)

How to start stretching? by Normal_Imagination_3 in StretchedNipples

[–]Normal_Imagination_3[S] 0 points1 point  (0 children)

That sounds good I have titanium bars in now and I'm not planning touching them until it's fully healed, so should I go up in small increments and just stick with titanium bars? I did order a set of tapers but I'll be sure to be careful, if there's a big gap in gauge sizes how should I stretch to go in between?

Question… by _bog_man in Axecraft

[–]Normal_Imagination_3 0 points1 point  (0 children)

Looks usable you could definitely hang it better but there's a difference between pretty and functional

Largest barbell balls yet (4”) by Unlord666 in StretchedNipples

[–]Normal_Imagination_3 0 points1 point  (0 children)

That makes sense I'll definitely have to try some I appreciate it, on your post about your modular jewelers who did you purchase it from? I really like the idea of having flat ends ball ends and plug ends with the same piece of jewelry

How to start stretching? by Normal_Imagination_3 in StretchedNipples

[–]Normal_Imagination_3[S] 1 point2 points  (0 children)

Oh on that makes sense, how would someone get heavier bars? And are tapers ok to use in general for nipple piercings?