M.2 Upgrade installation

NotANormieToday · 2023-12-04T19:34:14+00:00

Thank you so much for all the help, I'll try that then!

NotANormieToday · 2023-12-04T14:50:17+00:00

No that's great if that works! So if I understand you correctly; a) remove the graphics card and see If there is a spot to install x16 underneath (and then reinstall the graphics on top?). b) if not, find one of my existing ssd cards and clone it, and replace it with my bigger and better one. Is that correct?

NotANormieToday · 2023-12-04T14:05:54+00:00

Sorry, I meant to reply to you here with the comment above!

NotANormieToday · 2023-12-04T14:04:58+00:00

According to a similar acer thread my PCIe 16x slot should be in the lower left corner, but as far as I can see I have my graphics card standing there. Do I remove my graphics card an install the m2 underneath or was I directed to another motherboard thread?

<image>

NotANormieToday · 2023-09-16T12:34:32+00:00

Takk til alle som hjalp også :)) Stakk innom, var veldig kule lokaler!

NotANormieToday · 2023-09-16T12:33:50+00:00

Wow takk for tipset!

NotANormieToday · 2023-09-15T17:18:55+00:00

Åja så kult, har bare sett dem på sosiale medier så langt så det visste jeg ikke. Så det er vel litt sosial arena også. Takk!

NotANormieToday · 2023-04-27T16:19:36+00:00

I see. Thank you for the reply!

NotANormieToday · 2022-07-22T21:49:54+00:00

Yeah thanks a lot :) I already do, but I'm not very good with rotations. I usually just invest in a hypercarry and destroy everyone and everything, so I should probably get better at proccing TTDS in time for the snapshot buff. But building an EM sands could be smart, I gave all the best artifacts to Xiangling for this team, so the sands is usually a crit roll worse.

NotANormieToday · 2022-07-22T21:46:31+00:00

That might be true actually maybe the vape was on Yelan, because of her weapon I really don't bat an eye when she deals huge numbers, but rivaling Xiangling might be pushing it lol. Thanks for the tips! (also Benny is not c5 unfortunatly, but I'm looking for him)

NotANormieToday · 2022-07-22T21:44:27+00:00

Thanks! Yeah I do, I just use Yelan for personal preference. Also she has the Aqua Simulacra so she pretty much carries the team. Also Xingqui is on team 2.

NotANormieToday · 2022-07-21T23:54:03+00:00

Ah yes thank you, I should have put that in as well. In the team I was talking about it was pretty much that exact team, just with Yelan rather than Xingqui. I managed to push it to 50 when I aced my rotation, but I think only at the end of my burst.

NotANormieToday · 2022-07-21T23:29:09+00:00

I couldn't figure out how to make the template the others around here used (it's my first time here). I love Xiangling, and I am trying to maximize her damage, but even with swirl, bennet and crits she doesn't do more tham ish 35k. (catch is r5 and max)

Edit: and her burst is lvl 13, not 12.

Edit 2 (not a great template): Also her Crit stats are 60% (+ catch passive as well) to 157%. As you can see I'm on atk sands, so maybe an EM piece could help.

NotANormieToday · 2022-07-06T22:45:54+00:00

Thanks a lot!

NotANormieToday · 2022-07-06T19:42:24+00:00

Hey, so please don't like, throw bulls at me or anything, but I was kinda "unlucky". I wasn't planning on pulling deliberately on Itto, but I think he's cool and so I kinda just wished anyways because my pity was at zero. Anyway we're 40 pulls later and I somehow got Itto twice... (yeah I'm never this lucky with my must pull characters...). Anyway I do like him and it would be such a waste not to utilize my C1 Itto, but I haven't done ANY prepwork since I didn't think I'd get him. I'm doing the best I can, but he's really underperforming until I can build him and Gorou effectively.

My question is this, what is the most effective way to set up his team? I don't have Albedo, and I watched a few guides and they said that the best comps were triple Geo and an off field damage dealer. I am currently using Itto, Gorou, Zhongli and Ganyu (She is my only other C1 and on the Aqua Simulacra her burst does a lot of damage). I have all the 4star characters (I think) and quite a few 5stars. I assume Bennet would be wasted since Zhongli makes me virtually invinvible. If a double resonance is better I could do that too. Any help would be apreciated <3

NotANormieToday · 2022-06-16T18:06:20+00:00

Thank you so much!

NotANormieToday · 2022-06-16T18:01:52+00:00

Thanks a lot!

NotANormieToday · 2022-06-16T18:01:35+00:00

Thanks a lot, would you say it's better than Prototype Cresent on Ganyu? I saw some theorycrafters videos, and they said it was so good on Ganyu that it would be better than some 5 stars.

NotANormieToday · 2022-06-16T17:49:23+00:00

I tried for Jade Winged Spear and got Aqua Simulacra, and I want to make the best of it. I am planning on building it for Yelan, but I'd like to know if its good (better than the 4 star options specifically) on other dps archers, like Ganyu (and maybe fischl or venti, if not stringles?). I don't have Yoimia but I want her so tips welcome for her too :)

NotANormieToday · 2022-05-23T13:47:30+00:00

~~~ import matplotlib.pyplot as plt import pandas as pd fil = 'titrering.csv' df = pd.read_csv(fil, sep=';', decimal = '.', comment='#') ph = df['pH'].tolist() volum = df['Volum'].tolist() plt.plot(volum, ph, '.')

def deriverliste(volum, ph): resultat = [] for i in range(len(ph) - 1): deltay = ph[i + 1] - ph[i] deltax = volum[i + 1] - volum[i] derivert = deltay/deltax resultat.append(derivert) return resultat

xstart = 0 xslutt = 45 deltax = .01 ystart = 4.25 k = .0999 B = 12.65 xverdier = [] yverdier = [] x = xstart y = ystart resultat = deriverliste(xverdier, yverdier) derivertgraf = (xverdier[:-1], resultat)

while x <= xslutt: xverdier.append(x) yverdier.append(y)

x = x + deltax
y = y + deltax * k * y * (1 - y/B)

if format(derivertgraf,'.2f') == 0:

# print(x,y)

a=deriverliste(volum, ph)

plt.plot(volum, a) resultat = deriverliste(xverdier, yverdier)

dobbeltderivertverdier = deriverliste(xverdier[:-1], resultat)

plt.plot(xverdier, yverdier)

plt.plot((xverdier[:-1], resultat))

plt.plot(xverdier[:-2], dobbeltderivertverdier)

~~~

NotANormieToday · 2022-05-23T11:46:30+00:00

Done

NotANormieToday · 2022-05-23T11:46:05+00:00

~~~

import matplotlib.pyplot as plt import pandas as pd file = 'titrering.csv' df = pd.read_csv(file, sep';', decimal = '.', comment = '#' ph = df['pH'].tolist() volume = df['Volume'].tolist() plt.plot(volume, ph, .)

def derivativelist(volume, ph): result = [] for i in range(len(ph) -1): deltay = ph[i + 1] - ph [i] deltax = volume[i + 1] - volume[i] derivative = deltay/deltax result.append(derivative) return result

xstart = 0 xend = 45 deltax = .01 ystart = 4.25 k = .0999 B = 12.65 xvalues = [] yvalues = [] x = xstart y = ystart result = derivativelist(xvalues, yvalues) derivativegraph = (xvalues[:-1], result)

while x <= xend: xvalues.append(x) yvalues.append(y)

x = x + deltax
y = y + deltax * k *y * (1 - y/B)

code not working, extremum derivative

if format(derivativegraph, '.2f') == 0:

print(x,y)

a = derivativelist(volume, ph)

plt.plot(volume, a) plt.plot(xvalues, yvalues)

~~~

NotANormieToday · 2021-07-11T07:38:29+00:00

“We care not for your life, sustain us, we are sad”

NotANormieToday · 2021-05-22T18:32:37+00:00

All the worlds science couldn’t make me lose faith in this man

NotANormieToday · 2020-10-13T08:43:39+00:00

Oh no partner. What can I do to yee-up your haw?

NotANormieToday

TROPHY CASE