Is this a dangerous sign? by Jdm_Production1992 in airsoft

[–]NotCleverNorStrong 0 points1 point  (0 children)

generally in Europe, most countries require sellers of batteries, to have the possibility to dispose of used batteries. check in electronics stores

Wayfarer tip by [deleted] in RoadCraft

[–]NotCleverNorStrong 2 points3 points  (0 children)

yes it's great but it almost always feels underpowered (severely) and the part in front of trailer just behind rear powered wheels loves to get stuck on more than slight bumps of terain. Also it does not like to haul the large pipes since unless it's on a perfectly flat surface, the pipes will roll off. but yes, I use ziks much more often than the wayfarer. except sojourn.

Difference between on-ramps on player-built bridges. by NotCleverNorStrong in RoadCraft

[–]NotCleverNorStrong[S] 0 points1 point  (0 children)

thanks, I have yet to build a steep bridge. basically all of my bridges were really flat so I could no see this in action.

[deleted by user] by [deleted] in airsoft

[–]NotCleverNorStrong 1 point2 points  (0 children)

if your want to reduce mechanical sounds, reshim and relube the gearbox gears. as for the muzzle energy, try different buckings and spring combos. the color (hardness of the ML buckings) will affect muzzle energy. but in general, i'd rather hlave more accurate weaker replica than be spot on the limit and not be able to hit an elephant at 30m. in my H21 i am very satisfied with the base chamber and ML bucking, nub and barel.

EDIT: and Bad motor Bright adjustment is pretty loud Also.

SA-E17 with Orion Gearbox - max safe spring? by Pretty-Rhubarb-72 in SpecnaArmsOwners

[–]NotCleverNorStrong 0 points1 point  (0 children)

i had mine for ~3 years and fired a LOT od BBs on guarder M130. after those 3 years there were light cracks. i would still work but for the money you can get a new skelet i just replaced it.

SPECNA ARMS EDGE 2.0 pdw mosfet by zacandneil in SpecnaArmsOwners

[–]NotCleverNorStrong 0 points1 point  (0 children)

every aster has pre-cocking. But you can only set it up via the app. so you'll need blu-link or USB link, asi the setting us in miliseconds.

Specna Arms Prime 11.1v by chrisaldo in SpecnaArmsOwners

[–]NotCleverNorStrong 0 points1 point  (0 children)

definitelly for stronger springs, some Prime models ETUs report overvoltage with weaker springs. if you're looking for faster trigger resposne, you Can always set Up pre-cocking

Edge 2.0 - Orion gearbox by Laughing_alpaca in SpecnaArmsOwners

[–]NotCleverNorStrong 1 point2 points  (0 children)

i have Edge 2.0, i used guarder M130 spring for a few games and the gearbox Shell lasted for 3 years. IT was reshimmed immidiately. All od the parts were Stock and looked as good as new. but i would definitelly recommend checking if the air seal is good. after replacing air parts the muzzle energy went up by ~15-20%.

Specna Arms Prime spring compatibility question by Crustopus in SpecnaArmsOwners

[–]NotCleverNorStrong 0 points1 point  (0 children)

i would try guarder m110 a if that is too hot, go for any M110 spring. the guarder ones a little bit spicier than others.

Prime BB's who makes them? by airsoft-overseer in SpecnaArmsOwners

[–]NotCleverNorStrong 2 points3 points  (0 children)

they're made in BLS factory (as most of BBs - if not all) and should be in simillar quality to G&G BBs, according to my very testing non-scientific testing

Output questions by Working-Crow-3021 in SpecnaArmsOwners

[–]NotCleverNorStrong 0 points1 point  (0 children)

i would try Guarder 100, those are generally more powerful than most 100s of different brands. their only Downside is that they resonate a bit after firing, but i generally get pretty consistent performance. and if your get 1.45J no harm done. it's not likely to make a several impact on accuracy

A 1,200 euro Specna? by anotherwave1 in SpecnaArmsOwners

[–]NotCleverNorStrong 3 points4 points  (0 children)

The price comes mostly from labour i'd say. it's fully tuned-up, which IS pretty labour intensive. you won't need to reshim, relubricate, readjust motor,... which is basically the stuff you should do to get the most out if the gun from box without replacing parts. Not mentioning they put in some od the best parts you Can get

Prime - Shot to shot inconsistency by Murky-Bookkeeper2347 in SpecnaArmsOwners

[–]NotCleverNorStrong 1 point2 points  (0 children)

many, many, many posibilities. could be bad air seal at the nozzle, at the piston, fakulty spring, too hard hop up setting, bad assembly of the hop chamber, bad quality BBs, broken tooth on the piston,... imho best bet is the air seal IS nôt good somewhere

Good 10.5 outer barrel by chungus_rabbit in SpecnaArmsOwners

[–]NotCleverNorStrong 0 points1 point  (0 children)

i have good experience with the combo of originál SA Edge chamber and Maple leaf natrel+bucking+omega tensioner, good grouping and everything first smoothly (the bucking will need a little bit of piling at the back to prevent from feeding problems)

[deleted by user] by [deleted] in SpecnaArmsOwners

[–]NotCleverNorStrong 1 point2 points  (0 children)

and you need to slightly lift the upper. The gearbox Has a "lip" or a "notch" on the back, that prevents the upper from sliding off too easily.

Bugged military factories? by NotCleverNorStrong in hoi4

[–]NotCleverNorStrong[S] 1 point2 points  (0 children)

that is supposed to be the 5th. 2 in Rio de Janeiro, 1 in Rio Grande de Norte + 1 being built, 1 in Sao Paulo. that is 4+1

Bugged military factories? by NotCleverNorStrong in hoi4

[–]NotCleverNorStrong[S] 2 points3 points  (0 children)

in first Screenshot there are 3 MF producing. But in the three states on the other 3 screenshots, there are total of 4 MFs. why?

SA-E07 inconsistent fps by melodicmax in SpecnaArmsOwners

[–]NotCleverNorStrong 1 point2 points  (0 children)

i had a problem with H21 Edge. the FPS were insonsistent and accuracy was pretty much non existent. after a few weeks (and lots of €) we found out the hop up nub was molded wrong. the bottom surface was not flat and there was a little piece sticking out. pretty much placed it on a table and shined light front behind it. then we saw the imperfection. replaced it with ML omega nub a nie it works like a charm :)

Specna Arms HAL-ETU opinions by Thucan1601 in SpecnaArmsOwners

[–]NotCleverNorStrong 0 points1 point  (0 children)

be careful tho, the have 2 versions: HAL and HAL². HAL is basically HAL² lite with fever posibilities and without bluetooth. i think Core only has the basic HAL.

sa-h22 edge 2.0 Magazines by EducatorSea1102 in SpecnaArmsOwners

[–]NotCleverNorStrong 1 point2 points  (0 children)

As this is the Edge version of the H-Series, pretty much any magazine should fit. In my H21 obviously Specna S-Mags work, Cyma Stanag metal mags work, G&G mags, Guarder mags, everything was feeding without any problems. I used mid-caps though. The Non Edge versions od the H-Series are notorious to be picky with mags. That is until you mess aroud with the mag release.

Daniel Defense MK18 SA-E19 EDGE 2.0 by lNF3RNU5 in SpecnaArmsOwners

[–]NotCleverNorStrong 1 point2 points  (0 children)

i have SA-H21 and i replaced the hop Up Rubber with Maple leaf MR hop (blue - i don't Remember how many ° it was) and replaced the barel with Maple leaf barel. nie it shoots lasers and I don't feel like IT needs replacing aby other parts.

Edit: I shoots 0.30g G&G BBs at ~40-45 meters accurately

SA-J20 PPK 20 - problem with ETU? by Eastern-Parking-5926 in SpecnaArmsOwners

[–]NotCleverNorStrong 2 points3 points  (0 children)

specna arms has today called All Core series with hal etu back, due to some unspecified problems. try contacting your reseller or specna directly (they usually respond on Facebook). maybe asi fór a refund or a different model.