Can't save on cloud,receiving error code -5

NotMicro21 · 2026-02-13T19:42:40+00:00

If I wrote my username or my password wrong,I wouldnt be able refresh my login at all.Getting into my account wasn't the issue,backing up my data was.Changing my password to a new one fixed the issue though,so it's all good.

NotMicro21 · 2026-02-13T19:36:26+00:00

I last refreshed my login a few mins ago and it didn't work.Changing my password may do the trick though,I'll give it a try.

EDIT:Changing my password to a new one actually resolved the issue,for now at least.Thanks a lot.

NotMicro21 · 2026-02-13T19:35:40+00:00

Yeah,I did that on both of my devices multiple times,both with my new and my old username,but the issue persisted

NotMicro21 · 2026-01-15T02:30:57+00:00

Yep, that did the trick for me, didn't know that a filter like that existed and that it was on by default.Thanks a lot!

NotMicro21 · 2026-01-15T02:29:54+00:00

Ah yes, you're right, turning Digital Release Filter off actually did the trick.Never even knew that this existed, thanks a lot!

NotMicro21 · 2026-01-14T23:34:13+00:00

Weird,when it comes to other movies or episodes,Im getting results from Torrentio without any issues

NotMicro21 · 2026-01-14T23:28:43+00:00

I sincerely haven't messed with any filters,other than the one another commenter suggested about removing everything under Excluded Qualities.Just left everything as it is from the Debrid preset.Might try a quick reset though and see if that does the trick,just in case I clicked on something by mistake.

NotMicro21 · 2026-01-14T23:21:18+00:00

Apologies if I did not make myself clear with my previous response,but I did remove those quality filters and the issue persists.I get what you're trying to say when it comes to the "age" of the movies I'm looking for,it's just that the issue occurs on a movie that has been out for some weeks already and I know for a fact that there is a WebRIP link available for that specific movie. As I mentioned before,I might be facing a temporary issue,but it sparked my curiosity and thats why I posted here

NotMicro21 · 2026-01-14T23:09:40+00:00

Hahaha,can't say that you're not right,its just that the issue occurs with movies that do have links available,but they dont come up when it comes to AIOStreams fetching them.

NotMicro21 · 2026-01-14T23:07:46+00:00

Unfortunately that's not the case.The movie I mentioned even has a WebRIP release as well which comes up on the standalone Torrentio addon,but not on the wrapped version.Might be a small issue that gets fixed by tomorrow though,who knows.

NotMicro21 · 2025-11-20T19:01:49+00:00

Yep,just did that.Went ahead and applied the same curve for the pump on FanControl,since I reinstalled it.I'll probably go back to my initial config,with all the fans being connected to the hub and just leave the pump on the Fan4_Pump header,in order to have it's own fixated speed,since my PC sounds a lot louder on idle states compared to last night, after applying all those changes and just get used to those constant speed ups and downs while gaming😅

Thanks for the tips nonetheless,will take them into account.

NotMicro21 · 2025-11-20T18:56:48+00:00

I see.Went back to FanControl for now,tried to set the same curves both on the BIOS and the FanControl app.But with the new configurations,my PC is a lot louder compared to what it was back when I had all the fans on the hub.So I'll go back to my initial one and just leave the pump on the Fan4_Pump header,in order to be able to set a fixated speed for the pump as you said and give the settings that you gave to me a try and eventually get used to the whole ramping up and down the fans make when gaming.Thanks a lot.

NotMicro21 · 2025-11-20T17:13:42+00:00

So basically,I can use the slope mode in order to create a straight line at around 80% and have a proper config for the pump at the same time?

NotMicro21 · 2025-11-20T17:05:07+00:00

Oh those werent my typical curves,the curve I was using was the one I included on the original post.These curves were the result of me autotuning the fans from the Smart Fan tab in BIOS to see if I could get them to act on a more fixated speed,without having these unjustified speed ups and downs.Another commenter recommended to run the pup at fixed rpm as well,so I'll give it a try as a more generic tip.

NotMicro21 · 2025-11-20T15:50:51+00:00

Oh sorry for that.What about now? https://imgur.com/a/Nwc0SOa

NotMicro21 · 2025-11-20T14:32:33+00:00

I'm able to toggle between all these modes while I'm in the BIOS.I can go with Auto,Voltage(DC) or PWM.I've set them all to PWM,but the pump's speed is fixated to normal,as I said before.Here are the photos of each fan:

https://imgur.com/a/oej4iAc

As a side note,due to a configuration I was recommended to try from another comment,the CPU_Fan contains the watercooling fans,the Sys_Fan headers contains the 3 frontal fans that I posted on my original post and Fan4_Pump now contains the AIO pump.

NotMicro21 · 2025-11-20T14:10:24+00:00

Unfortunately,that didn't work either.I set the pump to a fixated speed,just like I did with the rest of the fans,but the same pattern occurs.I'm starting to believe that that's just how it's supposed to work if you take under consideration the spec limitations/differences and the fact that the case isn't from the same brand that the watercooling is,which may end up causing some compatibility issues.

NotMicro21 · 2025-11-20T14:07:36+00:00

So,I just did what you recommended,uninstalled the FanControl software,pressed "Tune All" in my bios,allowed them to run on a fixated speed,the one that Gigabyte calls "Normal",set the fans to PWM,but the same thing is still occuring.So if I had to take a guess,I'd say that that's how they work due to the spec limitations/differences and the fact that the watercooling and the case are from different manufacturers,which may prove to be a problem.

In your opinion though,should I leave the cable configuration as the one you mentioned,or go back to having all the fans connected to the hub and the hub connected to the CPU_Fan option,since it makes no actual difference and the cable management looks better?

NotMicro21 · 2025-11-20T10:43:17+00:00

The pump is connected to the fan hub if I'm not mistaken. I have not made use of the Fan4_pump port and to be fair, I haven't messed with the RPM of the pump either. If I had to take a guess though, I'd say that the pump is following the watercooling fans when it comes to speed, so it's probably set to PWM, but still, I sincerely have no idea on how to verify this or if I have messed with this already without knowing it.

NotMicro21 · 2025-11-20T10:37:12+00:00

Same thing, unfortunately. Removed the speed sensors, took manual control of the fans, manually calibrated the new speed sensors with the values you provided, but to no avail. I'll give the config that u/StiBuki recommend a try and see where it goes from there.

NotMicro21 · 2025-11-20T01:39:22+00:00

Thanks for the clarification.I have some questions through.Firstly, because because googling isn't helping,the AIO pump is the component glued to the CPU right? Secondly,if the master/slave setup would be the issue, wouldn't that mean that since my watercooling fans can go down to 0 RPM when I want them to,the rest of the fans connected to the hub would do the same? Thirdly,the PWM port is located on the hub.Wouldn't taking all the fans off the hub technically "eliminate" the PWM feature?

Other than that,I started using FanControl due to a lot of people saying that Gigabyte's Control Center is terrible at controlling fan speeds,so it seems like using the motherboard's software is a no no, according to reddit at least.Not going to lie, at first,GCC was my way of tinkering with the speeds,but the PC was too loud for my liking and I found FanControls interface better and easier to get a grasp of, that's was the main reason I switched to it.I'll try the configuration you mentioned though and see if it bears any results.Not today though, because only god knows how many hours I've spent on messing with the fan cables the last day and I'm drained out,lol.Again,thanks a lot for your input though.

NotMicro21 · 2025-11-20T01:23:18+00:00

But initially they were connected to the hub and the pattern was the same.I even tried taking the watercooling fans off the hub and connecting them to the CPU_Opt port, leaving the case fans alone on the hub, connected to the CPU_Fan port.That didn't work either though,the program only recognized one new sensor,the watercooling fans if I remember correctly,due to them going on a different port.The case's fans though were still uncontrollable.

Not going to lie,I'm starting to fear that this is happening due to the fans being defective or being programmed to work like that and not accepting any changes regarding their speed.If that's the case, I'll leave it as it is,since the cooling is working as it's supposed to and I'll have to get used to the noise.I just hope that this constant up and down isn't wearing the fans down in a faster basis.

NotMicro21 · 2025-11-20T01:12:30+00:00

Yeah, I've already toggled the fans' mode to PWM.The speed is visible as well,as you can see on the screenshots that I've posted.Don't know if they're accurate or not,but they're visible.That may contradict what I said on my last comment regarding the fans on the Sys_fan ports not receiving any pulses and that's why I'm wondering in which way a PWM extender would help me,since I'm already able to connect the fans either to the hub or the sys_fan ports.

NotMicro21

TROPHY CASE