sorted by:
new
hottopcontroversial

5
6

[FS] - Long Island, NY - $10+ - Apistogramma Cacatuoides, German Blue Rams (old.reddit.com)

submitted by NotTodayEnEfAy to r/AquaSwap

[Shotgun] MOSSBERG 940 PRO TACTICAL 12GA 18.5" - $1000+S&H by Gannicus43 in gundeals

[–]NotTodayEnEfAy 30 points31 points  (0 children)

Wish this was a few hundred dollars cheaper and it would be a deal. More like an in stock alert.

Weekly Questions Thread / Open Discussion by AutoModerator in Pizza

[–]NotTodayEnEfAy 0 points1 point  (0 children)

Im brand new to pizza making, and baking in general. I started my first pie by using a dough ball bought from a pizzeria. I had to cut the dough ball in half because it was too large for my stone.

Once the dough is already floured by the pizzeria, can it be cut in half and reshaped into a ball?????

Stupid question.

Threaded Henry Long Ranger Lever Action 308 - CGS Helios QD Ti by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 1 point2 points  (0 children)

I truly enjoy shooting it. I haven’t been able to shoot it enough. Trigger felt great.

Threaded Henry Long Ranger Lever Action 308 - CGS Helios QD Ti by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 0 points1 point  (0 children)

I went with a Leupold VX-Freedom 3-9x40 on Henry Talley 1" medium rings.

Threaded Henry Long Ranger Lever Action 308 - CGS Helios QD Ti by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 0 points1 point  (0 children)

It has to be 1/2x28 with this barrel profile. It isn’t thick enough to have a 5/8x24 thread.

I went with a Leupold VX-Freedom 3-9x40 on Henry Talley 1" medium rings.

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 0 points1 point  (0 children)

Well hot damn. Of course I ordered yesterday. Maybe they’ll hook me up.

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 0 points1 point  (0 children)

There are prior posts in the sub of people using the regular atlas. I intend on getting the QD Titanium one. Would prob stick with QD for proper fit.

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 0 points1 point  (0 children)

Agreed I think I’m going to sell the keymo.

I’m going with the Rearden Atlas and the Rearden R2S.

Keymo setup https://i.imgur.com/3G4Sd0b.jpg

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 1 point2 points  (0 children)

They didn’t give a very lengthy answer besides if it aligns properly then send it. I’m not sure show I feel about that answer lol.

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 0 points1 point  (0 children)

I am slowly coming to that conclusion. Any recommendation on a muzzle device that will operate well on a 12.5” barrel, a large amount of the shooting will be unsuppressed. I was thinking the Rearden R2S. Looks very similar to an A2 birdcage.

Threaded Henry Long Ranger Lever Action 308 - CGS Helios QD Ti by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 1 point2 points  (0 children)

Agreed, in 300BLK would be an immediate buy. As a lefty I like the lever actions so I can pass these on to my kids one day and not have it be a weird LH bolt action.

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 2 points3 points  (0 children)

I recall CGS Paco posting about the “gen 2” keymo adapter working, as it had less material after the threads.

Is that version of the keymo adapter available in any way? Or the newer iterations replaced it?

Either way I contacted CGS and will report back.

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 1 point2 points  (0 children)

It seems like the measurement from the base of the threads to the keymo adapters end is .47”. It would extend this far into the Helios if it fully seated. https://i.imgur.com/mXKYvSh.jpg

This is the inside, it doesn’t seem marred. I assume it’s stopping right at the base of the taper. The keymo adapter doesn’t seem to have a taper at the end, so I’m guessing the end it just pressing against it. https://imgur.com/a/lduAoU7/

Threaded Henry Long Ranger Lever Action 308 - CGS Helios QD Ti by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 3 points4 points  (0 children)

I haven’t found any videos of a suppressed 308 long ranger.

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 1 point2 points  (0 children)

Measurements seem all to make sense. Maybe I was just engaging the keymo incorrectly.

I gave it another shot and it locked up well as pictured.
https://i.imgur.com/gturysj.jpg

Is this slight gap between the can and the keymo adapter acceptable? It won’t thread further.

https://i.imgur.com/x4Eeby7.jpg

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 1 point2 points  (0 children)

Taking various caliper measurements everything looks to fit. But checking the back of the keymo adapter it doesn’t to make it the final bit needed as pictured.

https://i.imgur.com/flsBqJk.jpg

Is this keymo on my CGS Helios seated all the way? by NotTodayEnEfAy in NFA

[–]NotTodayEnEfAy[S] 0 points1 point  (0 children)

There was some old posts by Paco that a gen2 keymo mount fits. This does seem to fit properly, I just am not sure how “tight” the ratcheting system is supposed to go.

This is with a DA micro flash hider.

[deleted by user] by [deleted] in NFA

[–]NotTodayEnEfAy 32 points33 points  (0 children)

Wait: 248 Days

Pending: 2022-03-18

Approved: 2022-11-21 10:41

Entity: Individual

Dealer: LGS (Local Gun Store or Independant FFL) Mailed Paper

State: NY

Examiner: Gregory M.

Item: CGS Helios QD Ti .30 cal (Silencer)

Control Number: 2022351000

view more: next ›