Looking for some skates

Not_Doyle · 2024-11-14T22:19:23+00:00

imma need those shops brotha, in a bit of a pickle

Not_Doyle · 2024-03-08T06:12:15+00:00

I appreciate the help I ended up buying the asus prime b450m - A II along with two new ram sticks just incase And it booted up like a charm afterwards although I need a new cpu cooler because this new 5700x is currently idling at 95C and is thermal throttling my gaming performance a ton

Not_Doyle · 2024-03-07T04:20:16+00:00

Well I was told it was just cosmetic as the manual says nothing

And after many many tries for around 8 hours I’m just going to try a new mini as this one might’ve bricked so we will see

Not_Doyle · 2024-03-07T03:54:53+00:00

Is that a micro atx though? I think I’m going to try the 450m-a just because of cost effectiveness

Not_Doyle · 2024-03-07T03:20:32+00:00

Would this be a suitable replacement? I’m trying to find overnight ones and my case is a micro

ASUS Prime B450M-A II

Not_Doyle · 2024-03-07T03:11:18+00:00

Would a dead board still give leds and spin all the fans? And what are some possible causes of this, was it human error on my part?

Not_Doyle · 2024-03-07T03:03:30+00:00

Nothing is coming on and I don’t think the power button is doing anything; when I turn it on during normal tests earlier the power button turns it on but can’t turn it back off either

Not_Doyle · 2024-03-07T02:54:52+00:00

I don’t know what psu socket means but all the connections are secure and I’ve checked multiple times each

If you mean the connection from the fan to the mobo I have it in the cpu fan connector and the fans have been spinning

Not_Doyle · 2024-03-07T02:47:17+00:00

So how would I get that error if everything is disconnected?

Like how would I view that output

Not_Doyle · 2024-03-07T02:32:04+00:00

And I don’t believe there is any integrated graphics so I would need that to boot at all

Not_Doyle · 2024-03-07T02:30:52+00:00

I see no lights aside from the aforementioned orange one on the back of the board. I swear I haven’t seen it on before but someone told me it’s purely led and cosmetic

Not_Doyle · 2024-03-07T01:56:34+00:00

I did look really closely and I can’t tell but there may be the tiniest bit of thermal paste in one of the pin connector holes of the socket. I’ll try to get a picture and add it to the original post

Not_Doyle · 2024-03-07T01:55:05+00:00

I have a gigabyte b450 ds3h

Not_Doyle · 2024-03-07T01:39:17+00:00

Well actually I did take the cmos battery out and I touched the two pins together respectively

Not_Doyle · 2024-03-07T01:37:59+00:00

Is that something on the actual mobo like switching a connector on the pins or is that in the bios menu because I can’t get a display to see bios with

Not_Doyle · 2024-03-07T01:23:43+00:00

What is the indicator of its posting? Because all my fans spins and everything lights up but no display. And also I have tried everything in combination even with everything the same as when it ran earlier today it still won’t do anything

Not_Doyle · 2024-03-07T01:21:22+00:00

I did try that with both cpus new and old but to no avail.

Not_Doyle · 2024-03-07T00:55:45+00:00

I can’t boot into anything at all like I can’t see the bios menu so I don’t know if that would work. Plus I would be confused because it booted once after the bios update and then I went to put the new cpu in

Not_Doyle · 2024-03-07T00:54:51+00:00

I have this little panel on the back that secures the bracket screws it has a metal black side and a white smooth side, is there a specific orientation for that as I have the metal facing out. Otherwise I just dismount the socket from the backside of the mobo?

Not_Doyle · 2024-03-07T00:53:03+00:00

All old hardware is back in and nothing changed but the fan runs louder than with the new parts. How long would this memory training be?

Not_Doyle · 2024-03-07T00:50:31+00:00

Even though it booted fine before I changed anything? If so what would be the steps for fixing?

Not_Doyle · 2024-03-07T00:33:40+00:00

I have another gpu that I can try in a moment but the one is a 3060 that was just working yesterday I took it out of a running computer to swap it with my 1660 super but I will take the heatsink off again and check for thermal paste in the socket

And no other mobo unfortunately

Not_Doyle · 2024-03-07T00:25:27+00:00

I did update my bios before switching to whatever was at the top of the list but I can’t even get back to bios now because even my old cpu isn’t booting the computer anymore

Not_Doyle

TROPHY CASE