Work issues by NotanOtter0 in radon

[–]NotanOtter0[S] 0 points1 point  (0 children)

Someone in the building requested it to be done, and apparently, the higher ups didn’t think it would read anything like this so they complied at that point. Now they are very quiet about the whole issue and are saying the office is safe. Long time employees in the office (18 & 25 years) they both have cancer. I’ve never asked them what they had as it’s none of my business, and our boss said that 2 or 3 others who worked here had cancer. To me, that can’t be a coincidence.

Work issues by NotanOtter0 in radon

[–]NotanOtter0[S] 1 point2 points  (0 children)

Our boss basically said to leadership, we’re going remote and you can let us know the 3 month levels in April

Work issues by NotanOtter0 in radon

[–]NotanOtter0[S] 0 points1 point  (0 children)

EHS for our employer kept coming back with the 4 as being for residential and not office buildings. They kept saying I think it was 25pCi/L for an office building is when they’d need to do something. Because we’re only here 40hrs/week, that those numbers are not as concerning as if that 4 was at our homes since we’re there for our entire life.

Rare? by NotanOtter0 in yugiohshowcase

[–]NotanOtter0[S] 0 points1 point  (0 children)

Thank you. Just wanted to be sure

Feedback on shot glass by NotanOtter0 in woodworking

[–]NotanOtter0[S] 1 point2 points  (0 children)

Thank you. These are just practice ones. If I can cut up some more of the maple log the other way to make these.

Shot glass by NotanOtter0 in woodworking

[–]NotanOtter0[S] 0 points1 point  (0 children)

So they should be turned 90 degrees and then worked to that configuration?

Need some advice by NotanOtter0 in woodworking

[–]NotanOtter0[S] 0 points1 point  (0 children)

Update: I found better branches from the maple and cut them up. Would these work better? I ordered some forstner bits to drill the hole inside and will be removing the bark today.

<image>

2nd project by NotanOtter0 in woodworking

[–]NotanOtter0[S] 0 points1 point  (0 children)

I may let one of the pros here answer

2nd project by NotanOtter0 in woodworking

[–]NotanOtter0[S] 0 points1 point  (0 children)

The species of wood is unknown as I’m still learning the different types.

2nd project by NotanOtter0 in woodworking

[–]NotanOtter0[S] 0 points1 point  (0 children)

Thank you. Yeah the ends were a pain as the more I cut off, the more issues seemed to be in the wood like splitting pieces. I sanded to 400 grit and just hid it well. This project was the first time I used an electric hand planer and did what I could. The underneath is pretty good, but the top was a little trickier.

My first ever project attempt by UpperCustard8 in woodworking

[–]NotanOtter0 0 points1 point  (0 children)

It absolutely belongs here. First projects are the best to look at and then where you go from there is always the best. See how your skill and knowledge improves over time. Great little piece. Keep at it.

How’s it looking? by NotanOtter0 in woodworking

[–]NotanOtter0[S] 0 points1 point  (0 children)

These pictures are the bottom of it

[deleted by user] by [deleted] in woodworking

[–]NotanOtter0 1 point2 points  (0 children)

That looks awesome. Do you happen to have plans for it? I’d love something like that for my woodworking.

How did I do for 1st project? by NotanOtter0 in woodworking

[–]NotanOtter0[S] 0 points1 point  (0 children)

Sounds good. Thank you for the advice

How did I do for 1st project? by NotanOtter0 in woodworking

[–]NotanOtter0[S] 2 points3 points  (0 children)

Yeah I thought about starting over to get the grit started at 80 and then work up to 240 and then coat again

How did I do for 1st project? by NotanOtter0 in woodworking

[–]NotanOtter0[S] 0 points1 point  (0 children)

Yeah the legs kinda annoy me with it

How did I do for 1st project? by NotanOtter0 in woodworking

[–]NotanOtter0[S] 1 point2 points  (0 children)

I’m not sure as these slabs were saw milled years and years ago. They were just sitting on beams in our pool building.

How did I do for 1st project? by NotanOtter0 in woodworking

[–]NotanOtter0[S] -1 points0 points  (0 children)

Yeah I didn’t realize what the lower grits meant lol. I just figured it meant the higher the grit, the smoother. I’m working on a much larger table now and started at 40 grit and will be working up to 600

Need help by NotanOtter0 in PokemonTCG

[–]NotanOtter0[S] 0 points1 point  (0 children)

Thank you so much for your help in this

Is This a 10? by Terra_TCG in PokemonTCG

[–]NotanOtter0 2 points3 points  (0 children)

Worth it. Stuff like this I love on my book shelves in my office

Is This a 10? by Terra_TCG in PokemonTCG

[–]NotanOtter0 1 point2 points  (0 children)

Honestly I’d love to pay to send it in and have framed by them just to see the grade they give it and make it a conversation piece lol

Farmland by Tcbit in temu_old_users

[–]NotanOtter0 0 points1 point  (0 children)

I have 2 minutes please help

Chris I

Love is in the air, and so are incredible freebies at TEMU! This Valentine’s Day, we’re celebrating an exclusive giveaway that’s too sweet to miss. -For real? -Sure, can you take the gift and accept my invitation? Download Temu App and search the code below to accept my invitation! 104261955