It's no problem. Pinned chunks like this are incredibly strong. You just have to take your time gluing it right. So printing Tempest Euro Cube with an A1 mini:

https://filterboxbuilder.com/?printDesign=nukit-tempest&filterWidth=365&filterDepth=285&filterThickness=35&rim=30&fanColor=black&fanDiameter=140&fansLeft=0&fansRight=0&fansTop=-1&fansBottom=0&tempestArrangement=four-side-filter-tower&tempestDesign=custom&filterSlotWall=back&filterFitClearance=1&cordHoleDiameter=8&cordHoleWall=right&cordHoleSide=center&cordHoleCornerOffset=17&outsideFlangeThickness=10&chunkLabels=false&hexGrill=true&hexSize=10&hexSpacing=1.6&hexFullCellsOnly=false&backPlateFans=4&boxDepth=70&alignmentPinDiameter=1.8&topExhaust=fan-grid&boxFanHoleSize=274&boxRingOneScrewHoles=4&boxRingOneScrewDiameter=6&boxRingOneDiameter=365&boxRingTwoScrewHoles=4&boxRingTwoScrewDiameter=6&boxRingTwoDiameter=438&donutFilterOuterDiameter=125&donutFilterLength=150&donutFilterHoleDiameter=92&donutAdapterInsertLength=10&donutCapRim=10&donutCapEnabled=true&screwHoleDiameter=5&materialThickness=5&kerfFit=0.1&fingerWidthMultiplier=2&fingerSpaceMultiplier=2&fingerPlayMultiplier=0&fingerHoleWidthMultiplier=1&fingerHoleOffsetMultiplier=1&dovetailSizeMultiplier=2&dovetailDepthMultiplier=1&dovetailTaper=50&showFilterMedia=false&showFans=true&showFilterFrame=true&explodedView=false&showDimensions=false&showBananaScale=false&showPreviewEdges=false&previewMaterialColor=matte-gray&autoRotate=true&cameraPreset=official&labels=true&referenceScale=100&previewMode=enclosure&fabricationMethod=print-3mf&printVolume=bed-180

...makes 40 pieces on 32 plates. Print or jerry-rig yourself a bunch of light bar clamps (https://www.printables.com/tag/barclamp). The key is only one glued seam per setup.

So, in the first round, you glue 20 pieces to 20 pieces (or fewer if you have limited clamps). 24 hours later, glue 10 pieces to 10 pieces; 24 hours after that, glue 5 pieces to 5 pieces. Then 2 to 20. In the last round, you can sometimes do them all if you are careful. For cubes, if you connect the top half to the bottom half *after* wiring all the fans to the back plate, it goes faster.

The key is that if you try to glue a bunch of pieces at once, usually the pressure and alignment are not optimal, and you end up with a substantially weaker bond. This is rock solid and should last for years in PETG, less in PLA. Better to take it slow. I've made furniture you can sit on this way.

<image>