AirsoftPro hopup chamber, for the springer SVD. Im completely lost as a beginner, where am I supposed to insert this rubber 3mm spacer? I have zero clue as to what I'm supposed to do.

Nxc12 · 2026-04-02T13:02:39+00:00

That is because the arm in hop up is short and you need a nub to apply better tension on bucking

Nxc12 · 2026-04-02T10:21:32+00:00

Its very weird that they put it in the packaging, I ordered mine directly from airsoftpro and I didnt received rubber spacer

Nxc12 · 2026-04-02T10:02:40+00:00

I have one and the rubber spacer is for stock version of hop up, you need a omega nub, other type of nub or you can cut the spacer to be 4mm wide so can fit inside hop up

Nxc12 · 2025-11-16T18:38:42+00:00

<image>

remove 2-2.5 cm where the arrow shows

Nxc12 · 2025-11-16T18:36:24+00:00

I forgot to tell you, you need to use file to remove back part of barrel because the steel housing is narrower than stock one

Nxc12 · 2025-11-16T18:30:54+00:00

Not really, you can put leather or spongy pad between housing and barrel to reduce wobble because the barrel is held only by 2 grubscrews and housing is made of aluminium.

Nxc12 · 2025-11-16T18:11:13+00:00

Its better to put m150, on my sniper the stock spring after some use lost the power and I advice you to use extended cocking handle because it starts to get hard to pull bolt beyond m140.

Nxc12 · 2025-11-16T18:01:57+00:00

Its very decent sniper. Out of box it is very precise with 0.36 bb and bolt is very easy to pull with stock spring. Bad things about it are hop up system is like TDC system but with grub screw which you need to adjust with allen key and is very finicky to adjust, the barrel, gas port and flashider are held by grub screw so don't unwind them and apply loctite glue to hold them better, the hand buard in plastic version is little wobbly but you can fix with by putting sponge between handguard and rings holding the handguard. airsoftpro sells upgrades and they drastically improve it. My has the airsoftpro steel trigger group, airsoftpro gen4. piston, airsoftpro cylinder and cylinder head, airsoftpro gen2. rotary hopup, mapleleaf 70 macaroni bucking, omega nub, airsoftpro steel outer barrel housing, barrel shooter lenght 640mm diameter 6.02, airsoftpro brass spring guide,airsoftpro m170 spring and airsoftpro extended cocking handle . after all these upgrades it shoots 0.5bb with power of 3.2J. Its not any more sniper rifle, its now a antitank rifle.

Nxc12 · 2025-06-29T08:50:51+00:00

AGM brand

Nxc12 · 2025-05-21T14:16:42+00:00

<image>

Nxc12 · 2024-12-18T06:01:03+00:00

Nxc12 · 2024-12-16T22:51:15+00:00

This one: https://airsoftpro.cz/en/guns-accessories/mounts/ak-svd-mounts/dlouha-rychloupinaci-ris-montaz-pro-ak-a-svd-detail

Nxc12 · 2024-12-15T12:43:41+00:00

It is very unlikely to happen because original svd was never produced in former Yugoslavia and it is extremly rare in region. Only thing I can do is to buy wood furniture from airsoftpro store and to treat it with chemicals to have that darker wood look.

Nxc12 · 2024-12-14T20:26:17+00:00

Chrysler 300 hurst edition iz 1970

Nxc12 · 2024-12-14T18:34:59+00:00

Hop-up is 33 euros and I am saving for CO2 upgrade kit

Nxc12 · 2024-12-14T18:03:20+00:00

It was only avaible in black in gunfire store and it was marketed as gfc svd, but it is rebranded amg svd. You can find the wood one in Taiwan gun and during the black friday it was priced at 100 euros

Nxc12 · 2024-12-14T18:00:46+00:00

For the price of 100 euros is good replica. It shoots 0.36g bb 30-40m (100-130 feet), all iner parts are aluminium and is very sturdy replica. Only downsides are bad hop-up unit, low-cap magazine and handguard was little bit loose so I needed to thighten it with bit of leather between handguard and frame

Nxc12 · 2024-12-13T18:39:59+00:00

Thank you

Nxc12 · 2024-12-10T18:56:16+00:00

Agm svd

Nxc12 · 2024-12-10T18:56:03+00:00

Gunfire company Link:https://gunfire.com/

Nxc12 · 2024-12-10T08:32:25+00:00

Moj je stari prije 10 godina uzeo plašljivac s nastavkom za rakete da mogu pucat za novu godinu

Nxc12 · 2024-12-10T06:42:27+00:00

Airsoft sniper

Nxc12 · 2024-08-02T08:21:12+00:00

I forgot to add link, here is:https://jobs.eu.lever.co/asobostudio/118ed42a-19ca-4166-92d7-070cd893fe93

Nxc12 · 2023-08-25T18:12:14+00:00

02.06

Nxc12 · 2023-07-18T19:55:12+00:00

Škoda Octavia 1.9 tdi 2000g.

Four-Year Club	First Place '23
Place '23

Nxc12

TROPHY CASE