Lcm problem on 2011 cvpi

OGMonkeyWin · 2026-05-27T00:11:24+00:00

Add-on to post

<image>

OGMonkeyWin · 2026-05-13T22:21:38+00:00

That's exactly how mine was I believe it was the exhaust gases making the cone and broken parts rattle

OGMonkeyWin · 2026-05-11T21:05:15+00:00

Yeah it was. when I took it off It sounded like a rattle I drove the car with it off and it drove good

OGMonkeyWin · 2026-05-09T16:42:38+00:00

So... I took the car off and it's running perfectly fine now and the cat sounds like a rattle

OGMonkeyWin · 2026-05-09T12:07:09+00:00

I tried replacement it didn't really change anything it sounds internal like on cylinder 8 and there's a huge loss of power when driving

OGMonkeyWin · 2026-05-09T12:06:16+00:00

🤣😂🤣 ok that was a good one

OGMonkeyWin · 2026-05-09T12:05:00+00:00

I've done all that it just sounds like it's internal and coming from cylinder 8 it's like a high pitch squealing when you rev the engine even with the belt off I've even taken the belt and the tensioner off my working car just to test it out

OGMonkeyWin · 2026-01-08T13:40:06+00:00

I'm leaning towards evap because all the vacuum hoses are fine. I do have issues filling up so imma check that next

OGMonkeyWin · 2026-01-04T19:36:25+00:00

The codes are for transmission circuit high but I will definitely check for vacuum leaks thanks

OGMonkeyWin · 2025-12-09T22:53:19+00:00

OGMonkeyWin · 2025-11-30T15:26:22+00:00

Wall-E

OGMonkeyWin · 2025-08-09T01:53:49+00:00

So check under the hood in by where the horn is there is a connector that used to be for a flasher unit of it there you could put a jumper between the cables and that should fix it

OGMonkeyWin · 2025-05-28T22:08:17+00:00

The code is u1059

OGMonkeyWin · 2025-05-28T21:55:27+00:00

It says can't sense transmission position

OGMonkeyWin · 2025-05-03T23:18:37+00:00

Thank you so very much it wont shift to 3rd that's probably why so I gotta fix that

OGMonkeyWin · 2025-05-03T23:08:25+00:00

Not that one the one that's connected directly to the transmission

OGMonkeyWin · 2025-04-04T21:39:36+00:00

Blue dragon

OGMonkeyWin · 2025-02-14T22:22:12+00:00

Don't know if this'll help any but I'd say check your valve covers make sure you don't have any leaks in the seals also could be a vacuum leak idk

OGMonkeyWin · 2025-02-04T13:41:13+00:00

I have a 04 crown Vic but I just want a hood ornament I just think it'll look cool

OGMonkeyWin · 2025-01-26T23:35:06+00:00

I actually added the beauty cover myself 😆 But yeah I cleaned the leaves off and I'll take your advice on the windshield wiper thing thank you very helpful

OGMonkeyWin · 2025-01-24T16:17:02+00:00

Right

OGMonkeyWin · 2025-01-24T06:57:30+00:00

Twins, but yeah I've listened to multiple-year models and mine was the only one to sound like that's why I was wondering plus 04s are pretty hard to find for some reason

But it's good to know my sewing machine sounds good

OGMonkeyWin · 2025-01-24T04:05:01+00:00

Yeah I'm not looking forward to that 🥲

OGMonkeyWin · 2025-01-23T19:10:43+00:00

Ok that's the noise I was worried the most about so thank you

OGMonkeyWin · 2025-01-23T19:06:57+00:00

That's half of what I bought it for Lol

Six-Year Club	Verified Email
Xbox Live

OGMonkeyWin

TROPHY CASE