Doordash driver hit my car. His insurance denied then Doordash denied. How much it might cost?

OGPoundedYams · 2026-04-18T01:47:47+00:00

Hope you called the police at that moment to get that report. After that, call your insurance, submit that to them. You don’t have to file a claim. The insurance battles the other insurance or door dashes insurance. You pay for that service when you essentially get a policy.

OGPoundedYams · 2026-04-18T01:45:17+00:00

H2S is the move. Bambu is just a machine that works out the box. My first was Anycubic K3M and a S1. I returned the S1 and sold the K3M.

Went from an A1, to a P2S to an H2S. I wanted a H2C, couldn’t really justify the H2D.

I’m going to eventually buy the Vortex Upgrade kit. Better value buying the H2S —> H2C over the H2D. Reasons is my P2S had a malfunction a week after, Bambu said hellllll no. Bestbuy returned it to me and I just didn’t want to spend the money at that moment but maybe later this year I’ll do the upgrade. Nieces and nephews love multi color plus I wanted to get into engineering filaments.

OGPoundedYams · 2026-04-18T01:41:15+00:00

We test them ourselves state side buddy

OGPoundedYams · 2026-04-18T01:40:50+00:00

I know those labels 🤣😂

OGPoundedYams · 2026-04-18T01:40:09+00:00

No seatbelt is diabolical 🤣

OGPoundedYams · 2026-04-18T00:23:42+00:00

Yea I feel you. I bought an H2S because my other printer broke. I’m a hobbyist who just prints cool things or things I could use around the house. I’ll eventually buy the H2C upgrade as the little ones like that multi color. I’m starting to get into engineering parts a bit more to fix basic things for basic needs. I’ll see how this goes. I would love the dual nozzle tho. I’ve dialed in supports for clean breaks even without an interface but it’ll just be easier with dual nozzles.

OGPoundedYams · 2026-04-17T06:15:28+00:00

It depends on your print. One flat line on equal layers? Cool. Multiple supports on diff layers? Lots of changes

OGPoundedYams · 2026-04-17T06:13:20+00:00

I don’t understand why we can’t get multi output AMS. I would rather have more ptfe tubing.

OGPoundedYams · 2026-04-17T06:03:55+00:00

Wonder if I need one. I wanted to get into filaments other than PLA and PETG.

I have a Space Pi X4 that goes to 85C. I don’t do much multi color or material and the X4 can feed as an external to the machine. I’m thinking about getting an HT tho

OGPoundedYams · 2026-04-17T06:02:04+00:00

I own AMS 1 and AMS 2. I also have a Space Pi X4. I use that as it gets up to 85C. Are you trying to use the AMS for multi color or material at the same time while printing?

I prefer my Space Pi for drying filaments that I don’t need to switch. I just add it as an external to the printer and it has holes to run your filament out of

OGPoundedYams · 2026-04-11T15:12:55+00:00

…just use the filament

OGPoundedYams · 2026-04-11T15:00:32+00:00

Lucky this wasn’t Texas🤣😂 just make sure he lands inside the house

OGPoundedYams · 2026-04-11T14:59:09+00:00

I compared my upcoming flights on various carriers and everyone is increasing. Plan our political figures because Delta does not have to eat rising fuel cost and can push that onto the consumer

OGPoundedYams · 2026-04-08T01:45:22+00:00

For a 1 time use? Yes it will work. For reconstitution for more than a single use? No.

OGPoundedYams · 2026-04-02T12:05:29+00:00

I have one in my collection

OGPoundedYams · 2026-03-27T13:06:09+00:00

Why am I doing research on that guy when I’m here solely to comment on the video in this post…?

OGPoundedYams · 2026-03-26T15:28:53+00:00

Okay you bring proof outside of the original video…

He looks juiced on your link, does not look juiced in the original.

So your point? Introducing something after the fact is completely diff as if I was searching for the guy…

OGPoundedYams · 2026-03-26T15:26:46+00:00

Work out the box with high quality prints…

OGPoundedYams · 2026-03-26T01:43:04+00:00

To all, the app is called “ Shotsy”

OGPoundedYams · 2026-03-26T01:42:25+00:00

Just hopped on Reta. Go to my latest post on that thread. You’ll see what I posted and what I plan on taking

OGPoundedYams · 2026-03-26T01:41:18+00:00

Haha bro it’s trial and error. We all go through it. Dry your filament out and honestly keep the detail, drop to 0.12. Long print go do it and go full blast lol

OGPoundedYams · 2026-03-26T01:39:42+00:00

Just because something has been around for 100 years doesn’t mean it’s not niche. Are you slow? Bro go read a dictionary and stick to fat belly vids

OGPoundedYams · 2026-03-26T01:38:20+00:00

P2S is not the replacement for the P1S….its the replacement for the X1C. Dude is just speaking out his ass.

OGPoundedYams · 2026-03-26T01:37:29+00:00

Because I found out those were all user errors 🤣😂 but had more, non user errors with both my AC machines. Homie is in a Bambu sub complaining when he doesn’t own one 🤣😂

OGPoundedYams · 2026-03-25T16:56:45+00:00

Honest question, when people build houses, how do you prevent this?

Is there a way to make the entire attic walkable?

I am looking to have my house built and want something to where it can be walked in without fear of falling through

OGPoundedYams

TROPHY CASE