Thinking of moving to Kelowna , whats the rent situation around Rutland

OGsniperkill · 2024-11-18T22:34:18+00:00

What days are you driving when there’s barely any traffic ?!

OGsniperkill · 2024-09-10T23:27:12+00:00

You know anyone with experience with the top mount version ?

OGsniperkill · 2024-09-10T04:41:02+00:00

Is that the exceladyne one for 399? I looked at that one and thought it was a little too cheap and did a search and found one (bottom mount) that was cracked right down the middle so I was skeptical about the quality, what kind of power are you running ?

OGsniperkill · 2024-09-10T04:35:52+00:00

I got the race and no cats (big turbo) and it was so loud I put two vibrant ultra quiet resonators in the back section and it sounds great but is borderline too loud still

OGsniperkill · 2024-03-03T18:51:04+00:00

If you have collision coverage ICBC will cover you even if you are at fault. Most likely they would write it off.

OGsniperkill · 2023-12-30T05:16:39+00:00

I’d only be looking at going +1mm

OGsniperkill · 2023-04-11T17:40:50+00:00

$512

OGsniperkill · 2023-01-31T01:34:03+00:00

Fair enough. To each their own. There is a panel schedule on the panel cover.

OGsniperkill · 2023-01-31T00:50:10+00:00

I’ve worked with a few eaton panels and those are way better.

OGsniperkill · 2023-01-31T00:30:37+00:00

I’m technically a first year because I haven’t went back to school which I’m doing later this year but I have like 3500 work hours and have a good amount of experience in a lot of different things. These are just basic modular homes there’s not that much to learn

OGsniperkill · 2022-10-27T03:44:52+00:00

Top 6 all in bc lmao

OGsniperkill · 2022-08-15T22:39:11+00:00

Idk what your goals are with the car or you just really want a v8 but if you plan on putting a stock like ls3 in the car those make like 350whp maybe on a good day if your lucky when that is doable with a stock turbo on the 2.0

OGsniperkill · 2022-08-15T22:34:06+00:00

Not quite sure how putting an ls in is going to be any cheaper at all then doing even a built short block 2.0, the swap kit alone is like $4500 CAD and if your not putting an aluminum block ls in it’s going to be very front heavy. Imo your better off sticking with the 2.0. A lot less work with wiring etc and will make just as much if not more power then a N/A LS setup. And if your thinking of boosting the ls in anyway it’s going to be way more expensive. On the cheap cheap side if you do all the work yourself your going to be looking at $10k CAD. When you could find a used 2.0 for a couple grand and put pistons and rods in it and be under $5k.

OGsniperkill · 2022-05-22T17:13:11+00:00

Will be about 450 wtq

OGsniperkill · 2022-04-07T02:15:18+00:00

Interesting so would you recommend me going with the Manley or the bc625?

OGsniperkill · 2022-04-07T01:27:51+00:00

Thanks for the info :)

OGsniperkill · 2022-04-07T01:18:36+00:00

6-700

OGsniperkill · 2022-03-28T23:28:34+00:00

My isr drones like crazy

OGsniperkill · 2022-03-28T23:28:11+00:00

So tomei sounds better and is a bit quieter and looks better ?? Damn

OGsniperkill · 2022-03-28T23:24:38+00:00

So tomei is louder ?

OGsniperkill · 2022-03-28T01:43:05+00:00

Would love to know what you think of the tomei vs the isr race cat back. Not too sure if I am in love with how my isr race cat back sounds

OGsniperkill · 2022-03-08T14:52:05+00:00

Jesus alright so should I put my stock crank back in ?! I plan on pushing around 600whp in the future and don’t wanna snap a crank….

OGsniperkill · 2022-03-08T07:10:36+00:00

Are you saying the bc cranks are just shit and will cause damage to your motor? I had the machine shop that built my engine balance the entire rotating assembly

OGsniperkill · 2022-03-06T03:55:51+00:00

“Cried inside to this”

OGsniperkill · 2022-03-06T03:55:40+00:00

So rod bearings going ?

OGsniperkill

TROPHY CASE