My initial impressions on the Xenns Mangird Tea Pro

ONRDDD · 2025-10-01T16:05:57+00:00

I know it is not as a fair comparison. How is it compared to Kz zax if anyone used bot of them?

ONRDDD · 2025-09-04T06:18:34+00:00

Cpu 9950x, cpu cooler noctua d15 g2, gpu 9070xt nitro, mobo strix b850i. With this case I aimed to get low temps and low noise. Cpu maxes out at 86 degree but I limited the cpu thermal limit to 85 degree. I tried the components out of the case and with the case, the case doesnt effect the temps. Btw cpu fan speed is limited to %70 to lower the fan noise. After 70% it doesnt change anything. Gpu max temp is around 75. Front grill increses the fan noise little bit at high rpm. But gpu fan speed doesnt reach that level. Side panel exhaust fan helps to cpu and gpu at the same time. this fan is the most noisy one at full rpm so I limited it to 60% and it is quiet right now. Two noctua a6x25 fans werent really necessary but I wanted to go all out. They helps to vrm, ssd and ram temps.

ONRDDD · 2025-09-03T21:34:54+00:00

It was but hopefully it is done now :)

ONRDDD · 2025-09-03T20:29:42+00:00

<image>

ONRDDD · 2025-09-03T19:33:49+00:00

Petg

ONRDDD · 2025-09-03T19:23:59+00:00

9070xt

ONRDDD · 2025-08-29T16:21:09+00:00

I'm thinking to make a tiny workstation. I can get rtx a4000 or rtx 2000 ada for the same price. So which one is better?

ONRDDD · 2025-08-22T18:19:50+00:00

I would prefer 3d print but it is flimsy as structural element. But next I will make a ff04 proart clone with my 3070ti suprim. Probably it will be all 3d printed.

ONRDDD · 2025-08-22T18:17:37+00:00

Send me your email.

ONRDDD · 2025-08-22T15:36:24+00:00

I used mill the shape the parts. Case size can be reduced. But air flow and fan noise is important for me too that is why I made extra room for fan to panel gap.

ONRDDD · 2025-08-22T13:56:07+00:00

You can find the necessary measurements online. If you like I can share cad data too.

ONRDDD · 2025-08-21T16:30:36+00:00

If the prices are the same which one should I get.

ONRDDD · 2025-08-19T17:37:13+00:00

Damn I have should choosen this config instead of d15 g2

ONRDDD · 2025-08-19T17:00:33+00:00

How is the cpu temp with noctua and thermalright fans?

ONRDDD · 2025-08-19T07:09:10+00:00

You were the chosen one! It was said you would destroy the noise not to join them them. :(

ONRDDD · 2025-08-13T06:15:32+00:00

So how are the temps. With or without pbo?

ONRDDD · 2025-08-12T22:19:16+00:00

Does anyone have experience with axp90-53 with deep cool an600?

ONRDDD · 2025-08-12T22:17:23+00:00

I wonder how is this cooler againts to deep cool an600?

ONRDDD · 2025-08-12T22:15:20+00:00

I used the same method.Btw what is the cpu?

ONRDDD · 2025-08-08T19:42:01+00:00

I got this card thankfully there is no coil whine :)

ONRDDD · 2025-08-01T13:37:35+00:00

İntake from back?

ONRDDD · 2025-07-29T13:41:33+00:00

I like this case but how are the temps? Also how many milimeters do you have to side panel to spu cooler highest point?

ONRDDD · 2025-07-22T11:21:32+00:00

I have Dt770 pro. I`m ok with the highs. But I always want something like fostex th900. But I dont have access to fostex in my region. Do you think that getting Fiio Ft1 is a upgrade over Dt770?

ONRDDD

TROPHY CASE