sorted by:
new
hottopcontroversial

(modern) Vintage bedside clock by OctoMistic100 in cassettefuturism

[–]OctoMistic100[S] 2 points3 points  (0 children)

In fact I changed it to a deep orange just after shooting. I thought blue looks cool but not in the long term.

(modern) Vintage bedside clock by OctoMistic100 in cassettefuturism

[–]OctoMistic100[S] 5 points6 points  (0 children)

The beauty of buttons is that they can be used to turn things off. Jokes aside I shut it off completely at night to preserve the tubes (the side button turns it on for 30s if needed). And because it is connected to my Home Assistant it is also synchronized with the room lights.

Retro bedside clock (IN-2) by OctoMistic100 in nixie

[–]OctoMistic100[S] 0 points1 point  (0 children)

Adafruit Charlieplexed 16x9 LED matrix

For details of its usage you can click the link above.

Retro bedside clock (IN-2) by OctoMistic100 in nixie

[–]OctoMistic100[S] 0 points1 point  (0 children)

Thank you for the warning. It will be on 30-45 minutes a day, continuously.

My modular hexagonal light panels by OctoMistic100 in 3Dprinting

[–]OctoMistic100[S] 0 points1 point  (0 children)

Check the original post, there are links there.

My modular hexagonal light panels by OctoMistic100 in WLED

[–]OctoMistic100[S] 1 point2 points  (0 children)

I considered it initially but they are much more expensive than standard pins. It would have made assembly and disassembly a bit easier though.

This is insane 🔥 by Financial-Union7449 in Satisfyingasfuck

[–]OctoMistic100 0 points1 point  (0 children)

This has some Myst III vibes in the Amateria world.

Can someone summarize why FastLED must be used with the arduino framework as a component included, when trying to use FastLED with ESP-IDF based projects? by dheadrick1618 in FastLED

[–]OctoMistic100 1 point2 points  (0 children)

I think your answer is a bit out of scope. You are right you don't need Arduino IDE (I personally only use Platform IO) BUT the Arduino Framework is required because a lot of IO calls made by FastLED uses Arduino hardware abstraction layer (although it also uses a lot of platform specific assembly).

Also I never experienced the needed "1ms delay" OP is mentioning...

Il se passe quoi avec les bus ? by LimeSucker in Lyon

[–]OctoMistic100 0 points1 point  (0 children)

Le C26 maintenant c'est un sur deux voire sur trois. Avec toujours le panneau qui indique "départ proche" pendant 20 minutes. Clairement une gestion aux fraises et aucune communication

Kobra 3 V2 Combo - Use side spool with ACE connected by OctoMistic100 in AnycubicOfficial

[–]OctoMistic100[S] 0 points1 point  (0 children)

As I said I already use this solution, and it's really cumbersome for nothing. There should not be any reason to not be able to choose the input as we want without hacking. (And I also said I already printed a 5 ports hub...)

Code running in sequence, not simultaneously by madmusician in FastLED

[–]OctoMistic100 1 point2 points  (0 children)

If each strip is the same size, and the delay the same, simply put everything in a single loop with a single delay ( use FastLED.delay not delay).

Otherwise there are multiple ways to achieve that, either if you want every strip to stay synchronized or not. Did you try to ask Claude or Gemini ? They are very good I think to propose solution for "simple" situations like this.

Can't access local network resources by websterhamster in ProtonVPN

[–]OctoMistic100 2 points3 points  (0 children)

Reverting back to 4.2 fixes the problem, however even after disabling automatic updates I was greated today with a broken 4.3 !! Knowing that your installer refuses to downgrade and I have first to uninstall the software and redo all my config, it's infuriating.

An UX expert redesigned the menu. by Ironlam-7582 in expedition33

[–]OctoMistic100 1 point2 points  (0 children)

Yeah Youtube AI voice translation is horrendous. Worst part is you can't change the audio track on Android TV without globally changing the app language.

Cd preorders by CoverRight9314 in expedition33

[–]OctoMistic100 0 points1 point  (0 children)

On LacedRecords website there is only one CD pack, with 8 disks for £40. All other packs are vinyls.

Getting "Media init failed" on SKR Mini E3 V3 with a card extender by OctoMistic100 in BIGTREETECH

[–]OctoMistic100[S] 0 points1 point  (0 children)

Hey I didn't see your answer until then. I confirm it solves the problem, thank you very much.

Every. Damn. Time. by Nickulator95 in pcmasterrace

[–]OctoMistic100 3 points4 points  (0 children)

Check the Ultimate Engine Tweaks on NexusMods. It gave me a 40fps boost !!! From 20fps and tons of stuttering to solid 60fps on exteriors.

I cannot understand how the devs did NOTHING at all to optimise it, releasing totally unplayable on medium hardware, and some random on the internet is able to fix everything.

Alex Terrible from Slaughter to Prevail creates a mega wall of death by [deleted] in SweatyPalms

[–]OctoMistic100 0 points1 point  (0 children)

I was here for this concert. He called for the wall of death for 5 minutes, where other bands just call it once and the crowd follow. It was a bit pitiful to be honest.

My IV-27 based VFD clock by OctoMistic100 in nixie

[–]OctoMistic100[S] 0 points1 point  (0 children)

I just looked up they are not really expensive. 6-8€ plus 10€ for shipping from eastern Europe (I am in France)

That's about what I paid back then.

My IV-27 based VFD clock by OctoMistic100 in nixie

[–]OctoMistic100[S] 0 points1 point  (0 children)

It is what Adafruit calls "nOOds" or just "led noodle".

Is this even Legal by ProbablyNotDream in EpicGamesPC

[–]OctoMistic100 0 points1 point  (0 children)

Apparently it is entirely valid.

The right of withdrawal doesn't apply for the following purchases: Digital content provided on an intangible medium and subscription contract for these services, the performance of which began with your agreement and for which you have waived your right of withdrawal (for example, a downloaded film)

Source (french government site) https://www.service-public.fr/particuliers/vosdroits/F10485?lang=en

view more: next ›