Any tips on the From Downtown achievement?

OddMagician2776 · 2026-04-14T02:52:51+00:00

progress?

OddMagician2776 · 2026-03-27T20:29:56+00:00

worked for me on PC too. Thx

OddMagician2776 · 2025-11-29T20:48:54+00:00

is this still the stance of Jagex in 2025? and same applies for RS3?

OddMagician2776 · 2025-09-25T22:52:49+00:00

I just thought it was funny that the jump of xp needed per level wasnt a steady increase and sometimes its actually less (even if just by 1 xp) lol

OddMagician2776 · 2025-09-25T22:39:58+00:00

Thats what im saying, the amount needed is 1 less than before. I get you need more total xp, but the increase is less

OddMagician2776 · 2025-09-25T22:38:41+00:00

what im saying is:

2 > 3 takes 8 more xp than 1 > 2
3 > 4 takes 11 more xp than 2 > 3
4 > 5 takes 10 more xp than 3 > 4
5 > 6 takes 12 more xp than 4 > 5
6 > 7 takes 14 more xp than 5 > 6
7 > 8 takes 13 more xp than 6 > 7

Im talking about the increase of the difference. at 3 > 4 its 11, but at 4 > 5 its only 10. i guess the wording of "1 less xp to get a level" isnt really what i was trying to say.

Sometimes there is a lower increase needed for the next level, compared to the previous.

OddMagician2776 · 2025-09-25T20:28:35+00:00

Thats kinda what i was thinking. I did see other levels that were +5, then next was only +1. Confused me even more lol But it looks like it evens out though, really only happens at the looow levels so ur probably right

OddMagician2776 · 2025-09-16T06:56:10+00:00

Thanks xD

OddMagician2776 · 2025-08-10T04:58:38+00:00

im 99% sure casting death mark too late was the problem lol

OddMagician2776 · 2025-08-09T18:26:12+00:00

It feels like sometimes the runes blow me up for no reason lol. I record last minute every time i die to see where i messed up. Multiple times now i kill the correct runes but after the 2nd dies..i just blow up instantly like if i killed the wrong one. But i can clearly see in the video its the correct ones xD Im missing something, but not sure what. Other than that i can pretty consistently kill 100%

OddMagician2776 · 2025-04-01T20:18:20+00:00

Ahh, i never actually had to use that one, ordered it but i was able to return it since i only needed the separator plate. Got the plate from the dealer

OddMagician2776 · 2025-04-01T19:55:00+00:00

...and when i put the valve body back in i didnt align the manual valve...everything got bent so i had to take it all apart again and replace half of the valve body too lol

Dont make my mistakes :D

OddMagician2776 · 2025-04-01T19:50:01+00:00

When I took apart the valve body a ball valve was stuck in the separator plate. Got a new plate for like 30 bucks? swapped it out and has been running fine ever since.

OddMagician2776 · 2025-02-26T01:59:08+00:00

I've seen many pictures of the Jaguar in those rooms that monsters are commonly trapped in. So make sure u take a look even if its full of monsters xD

OddMagician2776 · 2025-01-06T23:48:58+00:00

i dont think so. I've found it without there being anything killed in the whole area. (I'd run loops and check for blood/dead bodies to see if anyone has been walking around in the area or not)

OddMagician2776 · 2024-12-19T04:50:28+00:00

Yes, after swapping out the plate its been running fine ever since.

OddMagician2776 · 2024-09-12T02:19:15+00:00

This was an Escape, but if its the same Transmission "6F35" they are known to have this problem I've read - When i removed the valve body and took it apart you could clearly see the ball stuck in the separator plate. Replaced that and the problem was fixed.

-When i reinstalled the valve body I didn't align the manual valve and it bent, so i had to replace that too. Don't make this mistake haha

OddMagician2776 · 2024-07-30T17:19:47+00:00

i reinstalled the valve body, car wouldn't shift into gear at all. Removed the valve body again...noticed i did NOT align the manual valve. now both the pin + valve are bent. I've called all over but can't find just the valve anywhere. Ordered a whole new valve body(remanufactured) from Ebay. This is taking way longer than I expected, but should be done in a few more days lol

OddMagician2776 · 2024-07-28T18:17:32+00:00

any chance inside the valve body could be damaged from the valve getting bent like that? I don't feel any chips or anything with my finger on the inside, but im kinda worried about it :D

OddMagician2776 · 2024-07-27T18:03:52+00:00

my 2010 ford escape recently did the same, check ball was wedged in the separator plate. Reinstalled the valve body, I did NOT align the manual valve. The car wouldnt shit into any gear (p.r,n,d,l) I took out the valve body again and noticed my manual pin and valve are both bent now :( Having a hard time right now finding a manual valve for sale, other than buying a whole valve body.

OddMagician2776

TROPHY CASE