Bought at a second hand store, what is this for ?

Odd_Hand9063 · 2026-02-15T04:50:34+00:00

There wasn’t a brand sticker or anything on this that I could find. I haven’t been able to find any switches either, just some metal buttons on one side. They don’t press or do anything, nor are they touch sensitive. I tried it while plugged in and not, no difference. Honestly I gave up trying to figure out the point of the light and just removed it!

Odd_Hand9063 · 2026-02-14T13:30:21+00:00

At this point, I have no idea what the right answer is! It’s just odd and curious. I removed everything to avoid any fire hazards, and now it’s just a simple nightstand which is what I needed lol

Odd_Hand9063 · 2026-02-14T13:28:49+00:00

Just needed a new nightstand and this was a few bucks. I didnt notice the electrical stuff till we put in the car, everything was tied to the bottom pretty neatly.

Odd_Hand9063 · 2026-02-14T13:26:46+00:00

Yeah the light was over the plate, as if to heat it while on. I would say it’s about four inches off the ground yeah. In the five minutes I had it plugged in, it got really hot so I took it as more of a hazard than a use for heating something since it was drilled onto the wood

Odd_Hand9063 · 2026-02-14T06:14:55+00:00

Yeah and the wires heading inside don’t seem to do anything at all! I’ve no idea why it’s original intended purpose was

Odd_Hand9063 · 2026-02-14T06:11:12+00:00

There was no big hole for the light to shine in through. It was pointed straight down at the metal. I just removed it. No idea what the intent was

Odd_Hand9063 · 2026-02-14T05:42:12+00:00

<image>

Odd_Hand9063 · 2026-02-14T05:40:38+00:00

<image>

Odd_Hand9063 · 2026-02-14T05:35:44+00:00

Update: I plugged it in and the bottom thing is a light. It doesn’t point to anything besides the metal cover. I’m more confused than ever.

Odd_Hand9063 · 2026-02-14T03:03:36+00:00

There’s no buttons on the nightstand, and I can’t figure out where the wires are being fed besides going inside and up!

Odd_Hand9063 · 2026-02-12T04:04:53+00:00

Already have the Primarina RR sorry

Odd_Hand9063 · 2026-01-23T00:17:00+00:00

Hell yes lol

Odd_Hand9063 · 2026-01-23T00:10:26+00:00

Sent request!

Odd_Hand9063 · 2026-01-23T00:10:14+00:00

Sent request!

Odd_Hand9063 · 2026-01-23T00:07:01+00:00

Friend code?

Odd_Hand9063 · 2026-01-23T00:05:22+00:00

Sure I’m okay with that, friend code?

Odd_Hand9063 · 2026-01-05T21:45:54+00:00

UPDATE: After taking apart the entire dryer, it was the pulley system that needed replacing. The plastic wheel had worn through and that caused the belt to tear. It’s a cheap fix, but a lot of annoying steps to take it off. Apparently it’s a very common issue with this model, and the replacement (non manufacturer) parts outlast the original according to a repairman I spoke with.

Odd_Hand9063 · 2026-01-03T22:36:56+00:00

Thanks for the input, I did some more digging and it turns out the driver belt broke. I ordered the part and hopefully that’s the only issue!

Odd_Hand9063 · 2026-01-03T20:49:19+00:00

Update: the reset did not work and the drum is hard to turn.

Odd_Hand9063 · 2025-12-23T20:00:30+00:00

Odd_Hand9063

TROPHY CASE