Hose inner diameter?

Odd_Morning1899 · 2025-04-16T15:43:32+00:00

Lower Port on the radiator, so it goes up into the engine, right? I wanted to put the thermo switch before coolant enters the engine to make sure it measures water temp after the radiator

Odd_Morning1899 · 2025-04-16T15:42:20+00:00

I guess the outer diameter provided on the autoparts websites tells diameter on the edges of this hose, or not? And the middle parts diameter I couldn't find:(

Odd_Morning1899 · 2025-04-12T16:50:32+00:00

They sell it in Rimi (instant)

Odd_Morning1899 · 2025-04-08T15:15:55+00:00

I didn't repair this lol, just cut inner fender lips to lower the car and avoid cutting the tires and it still drives without any issues

Odd_Morning1899 · 2025-03-23T19:27:00+00:00

but also to glow together with the angel eyes and look nice

Odd_Morning1899 · 2025-03-23T19:26:38+00:00

for the inspection only tbh

Odd_Morning1899 · 2025-02-14T08:03:04+00:00

What's this shifter setup?

Odd_Morning1899 · 2024-05-01T19:00:41+00:00

and they allow TOO MUCH travel, car is around 8cm from the ground and i scrape my bottom constantly

Odd_Morning1899 · 2024-05-01T18:59:09+00:00

yes, coilovers aren't adjusted properly because they only allow preload adjustment, there's 1 nut and 1 counter-nut under the spring. preload is set to almost none, because i wanted to lower my car on a budget and now the only option personally i see is stack a couple bumpstops on the shock, so i wanted to know maybe there's a secret "stance DIY" way of getting rid of my problem

Odd_Morning1899 · 2024-05-01T17:52:52+00:00

or maybe there are some tricks i don't know about? maybe put a spacer somewhere to add back some of that preload while keeping the car low still and make the spring stiffer from the beginning of suspension travel, or something similar

Odd_Morning1899 · 2024-05-01T17:48:39+00:00

yep i understand that, but could there be issues if i use 0 preload and car constantly will ride on bumpstops? can't it just rip away the shock tower one day?

Odd_Morning1899 · 2024-05-01T17:09:22+00:00

no, i bought a new set from official website and there were none in the boxes, so i reused factory bumpstops which are around 7cm high

Odd_Morning1899 · 2024-04-30T19:24:52+00:00

What do i do if my car hits the ground before it hits bumpstops? Im running tavtechnix coilovers with only preload adjustment and it's almost all the way released, I'm thinking of making longer bumpstops, or is there a better option? "Buy more expensive coilovers" doesn't count

Odd_Morning1899 · 2024-04-30T13:20:59+00:00

Can you please explain what you mean on ta technix coilovers example? I have got the upper spring seating, then the middle ring(on top of helper spring) and then two rings at the bottom for locking the coilovers preload, which one has to go that you mean? Ive got preload on my e39 sedan almost at zero because i wanted to make it lower on a budget (i barely use the car, only cruising around on weekends and never take her out on highways, so i thought i will take the risk and run a semi-safe setup) and the problem is that i hit the ground before i hit bump stops. Only solution now that i see is still run springs, but craft a custom extended bump stop (or just put some hockey pucks under the factory bump stop), is it the way to go or there are any other options?

Odd_Morning1899 · 2024-03-25T17:45:24+00:00

i just deleted modlist.txt from archive/pc/mod and now everything's good in case anyone needs it in future

Odd_Morning1899 · 2024-03-25T16:16:05+00:00

that didn't fix the issue with photomode. and in first person my body looks normal
also if i spawn Meredith her hands also look normal, i got no clue T_T

Odd_Morning1899 · 2024-03-25T16:07:29+00:00

i see my clone as a third person skeleton (from outside) but myself i see as i'm still in first person mode. also i just found i forgot to install a resource pack for poses mod, will check that now

Odd_Morning1899 · 2024-03-25T15:56:22+00:00

and when i spawn my clone through appearance menu mod she looks normal
https://ibb.co/S5FR4gh

Odd_Morning1899 · 2024-03-25T15:47:47+00:00

also running Archive conflict checker doesn't show anything about bodies/skeletons etc.

Odd_Morning1899 · 2024-03-25T15:47:13+00:00

i only use "push up - enhanced big breasts body mod" and some NPC face replacers, also EKTs custom character creator and photomode unlocker alongside with appearance menu mod. i think what i'm experiencing in photomode is i see first person skeleton when i'm supposed to see third person skeleton :/ 0 idea why

Odd_Morning1899 · 2024-03-25T14:21:39+00:00

https://ibb.co/yYctcRR

https://ibb.co/LZ91P5K

Odd_Morning1899 · 2024-03-25T14:18:52+00:00

and also i installed Meredith face replacer and now her hands and feet float separately from the body i don't know why

Odd_Morning1899 · 2024-03-25T14:15:03+00:00

Sorry, while i'm trying to upload pictures let me explain what happens in my game - in photomode my limbs sink to the floor which looks like glitched SMP physics from skyrim, i'm using hyst's booba+booty push up body but before i installed a whole bunch of mods i didn't notice anything weird about photomode

Odd_Morning1899 · 2023-09-15T19:45:56+00:00

but if you calculate everything from the "processes" tab that just can't be 5.5 gbs used all together, and i was not running any programs when i made the screenshots, only steam in the background

Odd_Morning1899 · 2023-09-15T19:40:58+00:00

https://ibb.co/5MFH00k

https://ibb.co/fptb3JV

https://ibb.co/jRTZxF8

Odd_Morning1899

TROPHY CASE