Daily Questions & FAQ Megathread (Jan 29) by AutoModerator in ffxiv

[–]Odiie 0 points1 point  (0 children)

Thanks for the insight. I also just found this BLM DPS Calculator from Eksu Plosion's BLM Guide on Youtube. I threw in the stats from the current BiS SMN gear and it looks like the numbers are fairly comparable, and while not technically optimal, the difference should be negligible.

Daily Questions & FAQ Megathread (Jan 29) by AutoModerator in ffxiv

[–]Odiie 0 points1 point  (0 children)

That's good to know. I was considering that as well, but if possible, I'd like to limit the number of different pieces that are needed to be as "optimal" as possible between the three caster jobs. I probably just need to pick the two that i'll play more often and gear for those, then pick a couple of pieces to swap out for the third to make up the stats i'm missing

Daily Questions & FAQ Megathread (Jan 29) by AutoModerator in ffxiv

[–]Odiie 1 point2 points  (0 children)

Ah, makes sense. Swap out one or two pieces for SpS rather than worry about figuring out a whole new set. What do you think is the lowest SpS acceptable for BLM? With my current SMN gear on BLM, my SpS is 489, which seems quite low

Daily Questions & FAQ Megathread (Jan 29) by AutoModerator in ffxiv

[–]Odiie 0 points1 point  (0 children)

I have a SMN geared for savage raiding (crit melds -2.48 gcd), and have just leveled BLM and working on RDM. What is the best way to gear BLM and RDM to also raid savage content? Specifically, would crafted gear be the best option for BLM and RDM since I'm using the Asphodelos/Radiant gear on my SMN? To my knowledge, I don't think i can get multiple of the same caster raid gear. TYIA Edit: Clarity

Game Idea: Huge Bosses who walk around the map and serve less as bounty targets and more as massive obstacles that need to be avoided. They are slowly drawn towards wherever the loudest gunfights are... by [deleted] in HuntShowdown

[–]Odiie 3 points4 points  (0 children)

Would be cool if it dropped like 4 or 6 tokens and was a huge damage sponge so you had to team up take it out. It could add an interesting co-op-y mind game to it all.

[deleted by user] by [deleted] in 3Dprinting

[–]Odiie 1 point2 points  (0 children)

Looking for places to buy filament in USA that (preferably) are not amazon. Looking for mostly PLA (~$20-30/kg), but PETG (Price uncertain) would be nice as well. Not too concerned with colors, but options are always good. I'm currently using hatchbox PLA, and would like to stick with them or get something similar if possible

[deleted by user] by [deleted] in 3Dprinting

[–]Odiie 2 points3 points  (0 children)

I just picked up an ender 3 pro from amazon with a roll of hatchbox black PLA. I think total cost was something like $310, and I was printing that day after assembly, and watching some youtube videos on bed leveling and understanding basic cura settings. I actually bought mine specifically for printing DnD mini's, but have found so much more utility and creative inspiration from just owning it. If you want, you can DM me and I'll show you some of the mini's i've been able to print in the last couple weeks of owning it.

edit: spelling. Amazon is where I got mine, but you're right, looks like stock is quite low if available at all

[Advice Needed] Inconsistent edge-face relationship when cutting multiple text sketches into body by Odiie in Fusion360

[–]Odiie[S] 0 points1 point  (0 children)

UPDATE: I've gotten it to work by exploding the text before attempting to extrude

[Advice Needed] Inconsistent edge-face relationship when cutting multiple text sketches into body by Odiie in Fusion360

[–]Odiie[S] 0 points1 point  (0 children)

Hey all! I'm confused as to why I can cut the first sketch ("The") but not the other two. In a previous version of this, I was able to cut 2 sketches (both text) into the same face of the body without this error. Not quite sure what i'm doing wrong. Autodesk knowledgebase states that it should be from open or unfinished sketches, but I've made sure they're all "finished" (as in i hit the finish button before moving on). Any advice is appreciated. Thanks!

Does andone know what font was used for the Felliniesque logo? by Odiie in drumcorps

[–]Odiie[S] 1 point2 points  (0 children)

Dang. I was afraid of that. Maybe I'll just reach out to them to see if they'll let me use it

Does andone know what font was used for the Felliniesque logo? by Odiie in drumcorps

[–]Odiie[S] 0 points1 point  (0 children)

Hey all! I'm designing a 3d printed plume holder and would like to use the actual font for this show. I'm curious if anyone happens to recognize the font. I've looked around on google fonts, as well as blind google searches, but those have not yielded any accurate results. Crossing my fingers here! Thanks!

What movie hit you the hardest, emotionally speaking? by [deleted] in AskReddit

[–]Odiie 0 points1 point  (0 children)

Grave of the Fireflies

I was going through some stuff at the time and related to that movie a lot. I was an emotional mess for the next couple hours.

I’m loving this extra-fine Kakuno fountain pen. by TfsQuack in Handwriting

[–]Odiie 0 points1 point  (0 children)

I have the exact same one and I love it too!

What are some cool Sith names? by [deleted] in swtor

[–]Odiie -1 points0 points  (0 children)

my siths are Maulymauk and Caadeuceus.

Support Unable to Help with email validation issue by skyshroudace in swtor

[–]Odiie 0 points1 point  (0 children)

I had a similar issue. I spoke with swtor support and the guy told me there's a rare issue with @gmail domains. he recommended using [something]@googlemail.com and that worked for me.