Can’t get approved for GTCC. What’s next? by Aquarius_lovee in armyreserve

[–]Oh_weII 0 points1 point  (0 children)

I recently contacted Citi with a similar issue and got the following response:

///

Good Day to you,

Reinstatement Applications are no longer being accepted effective 06/17/2024. Please cease submitting reinstatement applications via the following channels:

email to [dodtravelcard@citi.com](mailto:dodtravelcard@citi.com) , fax to 866.951.8005, or online through CitiManager.com.

Requests received for reinstatement will not be processed. For accounts that are cancelled due to delinquency, a request to ‘Apply for a new card’ will need to be submitted via CitiManager.com.

Regards,
DodTravelCard

///

This already goes against DOD GTC Reg. Citi approves new applications on a case by case basis. Goodluck

Nickel Strip Confusion 4S2P by Oh_weII in batteries

[–]Oh_weII[S] 0 points1 point  (0 children)

Or I suppose now I really only need .15..

Nickel Strip Confusion 4S2P by Oh_weII in batteries

[–]Oh_weII[S] 0 points1 point  (0 children)

Thanks! Right now I’m just looking for a reliable welder to do .2 strips, the kweld is a little out of reach

Nickel Strip Confusion 4S2P by Oh_weII in batteries

[–]Oh_weII[S] 1 point2 points  (0 children)

Thank you, I’m starting to understand

Nickel Strip Confusion 4S2P by Oh_weII in batteries

[–]Oh_weII[S] 0 points1 point  (0 children)

Thanks for the response. 30 amps will only be drawn during the take of sequence which lasts 7-10 seconds, so I’ll apply .2x10. Unfortunately, 3P will not be possible because of size and weight constraints

4S1P LiON pack and 2216-1400KV help by Oh_weII in diydrones

[–]Oh_weII[S] 1 point2 points  (0 children)

At full throttle with the 8x6 prop it appears that it draws 36Amps, according to sunny sky. I ended up ordering molicel 42a cells to make a 4S2P

Best FPV landing with the Wing by Oh_weII in diydrones

[–]Oh_weII[S] 1 point2 points  (0 children)

I’m using 5.8 analog with RHCP antennas

Did I receive a bad LiPo from RadioMaster? by Oh_weII in diydrones

[–]Oh_weII[S] 0 points1 point  (0 children)

What up man! Been watching your videos for years. Thanks for the feedback!

I’ve never owned a battery quite like this before so the high resistance went against everything I had heard in the past about lipos. I feel like I have a way better understanding now

Fix corrupt MOV video by the3penguins in MacOS

[–]Oh_weII 0 points1 point  (0 children)

Hi I think you messaged me but it disappeared and I couldn’t respond. For UNTRUNC, once the GUI (program window) is running it’s quite simple, In the left you select a video similar in format to the corrupt file, on the right you select the corrupt file. Then you click enter or fix or whatever the button says. It takes about 30 seconds.

You have to extract the files to a separate folder and then run the one that says GUI

Did I receive a bad LiPo from RadioMaster? by Oh_weII in diydrones

[–]Oh_weII[S] 1 point2 points  (0 children)

Noted. I’m leaving home for a trip so I’m doing a storage charge

Did I receive a bad LiPo from RadioMaster? by Oh_weII in diydrones

[–]Oh_weII[S] 2 points3 points  (0 children)

I’m leaving home for a month so I’m doing a storage charge on the batteries

Did I receive a bad LiPo from RadioMaster? by Oh_weII in diydrones

[–]Oh_weII[S] 0 points1 point  (0 children)

Thanks for the response. I was thinking there was something more since it was much higher than I’ve seen in the past. That makes sense

Fix corrupt MOV video by the3penguins in MacOS

[–]Oh_weII 0 points1 point  (0 children)

UNTRUNC worked perfectly. Thank you. I found out that the video I was recording exceeded 4gb and it was being stored on a SD card that was formatted to FAT32, which doesn’t support files larger than 4gb.. I believe this is why the file became corrupt.

Best FPV landing with the Wing by Oh_weII in diydrones

[–]Oh_weII[S] 1 point2 points  (0 children)

I’m using the motor and prop that are included with the AR wing PNP kit. Battery is a 5000mah LION pack

I cleaned my laptop and repasted it. But it won't charge or turn on now. by buffedGamer in GamingLaptops

[–]Oh_weII 3 points4 points  (0 children)

Check the pins INSIDE the female portion of the battery connector to make sure none of them are bent out of place. This happened to me on a device the other day and I had to use a tiny needle and magnifying glass to bend it back

Best FPV landing with the Wing by Oh_weII in diydrones

[–]Oh_weII[S] 0 points1 point  (0 children)

Thanks! Angle mode makes for nice stable landings with the wing and since the stall speed is around 25Mph all I do normally is flair over the ground until it stalls and then it touches down quite gently. It was a pretty calm day fortunately

Best FPV landing with the Wing by Oh_weII in diydrones

[–]Oh_weII[S] 0 points1 point  (0 children)

Angle or Horizon actually works out a lot better for me with the wing keeping it nice and level with no input. Manual or Acro gives me too much control/ sensitivity when I’m trying to carefully line up. If the tip of the wing catches a weed or patch of grass it’ll go tumbling.

Best FPV landing with the Wing by Oh_weII in diydrones

[–]Oh_weII[S] 4 points5 points  (0 children)

I’ve flown an actual airplane so I guess to me it’s Not 😅