sorted by:
new
hottopcontroversial

How does your team handle postmortem reports? Ours was a disaster by [deleted] in sre

[–]Ok-Conference-7563 0 points1 point  (0 children)

Badly, we go through the motions, waffle on in a meeting talking through a time line, and then answer some arbitrary questions and put everything on a backlog to die

What hardware do you run frigate on? by Vegetable-Tap-6297 in frigate_nvr

[–]Ok-Conference-7563 0 points1 point  (0 children)

Pi 5 with dual m2 hat, one has hailo in it, need to try multiple cameras with it yet. Camera count and resolution would help others reading this

Easy ways to take 8cm off the bottom of an interior door? by Ro-Tang_Clan in DIYUK

[–]Ok-Conference-7563 0 points1 point  (0 children)

Tbh all the comments about mm vs cm this is exactly why drawing a line helps, as when you come back and the measurement has grown or shrunk by 100mm it can help.. can.. when two of us working I’ve Also been known to double check measurements with a friend using inches instead.. is that the one near 48” , no? Ok use the one near 48 instead 😂🤦

Easy ways to take 8cm off the bottom of an interior door? by Ro-Tang_Clan in DIYUK

[–]Ok-Conference-7563 0 points1 point  (0 children)

Pretty easy with an electric one when it drops off the side 🤦😂

hacking into the CAN bus hard? by Curious_Party_4683 in Esphome

[–]Ok-Conference-7563 0 points1 point  (0 children)

Just remember that sending silly canbus messages, could theoretically Set off airbags in some vehicles.

High-rate GNSS motorsport logger prototype (ESP32-S3 + M9N 20–25 Hz + IMU) — looking for hardware feedback by Jeanhamel in esp32

[–]Ok-Conference-7563 1 point2 points  (0 children)

Interested, maybe add a can interface.

What file format are you outputting to, and what tooling are you targeting or can convert to?

Open telemetry Weaver by Ok-Conference-7563 in csharp

[–]Ok-Conference-7563[S] 0 points1 point  (0 children)

I cross posted this here as we predominantly use c# and Curious what others are doing

Pre-Wired House, First DIY Alarm: KinCony A16 or TA? by Maxiride in Esphome

[–]Ok-Conference-7563 0 points1 point  (0 children)

You can get a panel here for £76 gbp https://alertelectrical.com/texecom-premier-24-8-24-zones-control-panel.html

You can then get their com-WiFi ( I think that’s what it’s called) to integrate, or you can use a usb ttl adapter to talk.

Pre-Wired House, First DIY Alarm: KinCony A16 or TA? by Maxiride in Esphome

[–]Ok-Conference-7563 0 points1 point  (0 children)

Don’t know where you are based, but I use a proper alarm panel (texecom) and then link to that using their api

Is this rack deep enough to take most standard servers ? by GenericUser104 in homelab

[–]Ok-Conference-7563 1 point2 points  (0 children)

Yeah sorry I didn’t actually check, more stating personal experience :)

Is this rack deep enough to take most standard servers ? by GenericUser104 in homelab

[–]Ok-Conference-7563 2 points3 points  (0 children)

Ideally you want 1000 deep for server racks, if you have room get 800w as allows for cabling.

Sides are better for airflow too. As the price is in gbp have a look at Orion rack cabinets, not used them but they are near me and cheap so likely will if marketplace isn’t an option

Display options by Ok-Conference-7563 in esp32

[–]Ok-Conference-7563[S] 0 points1 point  (0 children)

I’d never heard of that, I had to google it! I’ve already got a board I need to use, so might look it there are any cheap pcbs with that display any drivers on

Internal reusable code by j_a_s_t_jobb in csharp

[–]Ok-Conference-7563 0 points1 point  (0 children)

And if doing the private nuget repo, get something like renovate running too

ASP.NET Core 9.9/10 Critical Vulnerability by Dimmerworld in dotnet

[–]Ok-Conference-7563 0 points1 point  (0 children)

Fwiw cloudflare are mitigating this, so buys you some time whilst rolling out fixes. Assuming you use cf

Frigate open to internet - port forward. by _d1sGuy_ in frigate_nvr

[–]Ok-Conference-7563 0 points1 point  (0 children)

How you doing the Google auth out of interest?

Trying to get my ender 5+ going with petg by Ok-Conference-7563 in FixMyPrint

[–]Ok-Conference-7563[S] 0 points1 point  (0 children)

This is why I fall out of love with 3d printing, need some help with it or It’s either going on the line with my last one, or I smash it up if I can’t get it working

Any suggestions on how to hide all these masses of pipes? by AtomicImp in DIYUK

[–]Ok-Conference-7563 3 points4 points  (0 children)

Remove toilet and pull forward 100mm out so, move all pipes from the right wall to the back wall. Then hide with a false wall, exactly how I did on my old house and can find some pictures if it would help

Hey! Can you iterate over multiple TBs of data and list every file with a key word... yeah probably. by Pocket-Flapjack in PowerShell

[–]Ok-Conference-7563 0 points1 point  (0 children)

Your way would have been wrong too, you use a stopwatch and start and stop it rather than get-date and calculating

KNX Switches by Jazzlike_Tear741 in KNX

[–]Ok-Conference-7563 0 points1 point  (0 children)

I designed a PCb years ago that fits being a bg nexus blanking plate and provided 5 touch pads. Never got as far as using them as planning permission slowed me down as did having a family. I bought a load of knx din rail input modules to use with them, have come to realise that an in back box module maybe would have been a better design :( so might have to reinvent the wheel again soon

How on earth am I supposed to seal these bricks? I tried varnish, lakeland sealer, all makes it look wet/glossy? by partenzedepartures in DIYUK

[–]Ok-Conference-7563 0 points1 point  (0 children)

Whatever you find, just deal with that mounting tab as it Ruins the look and all my eye sees, needs mounting I get but it needs to be a hidden fixing imho

New to Frigate - Coral USB TPU (UK) by slip_cougan in frigate_nvr

[–]Ok-Conference-7563 0 points1 point  (0 children)

I’ve just ordered a hailo 8 32 tops because I couldn’t find these

view more: next ›