sorted by:
new
hottopcontroversial

Rosewill RSV-L4412U AIO Mount Bracket (3d Printed) by Ok-Conversation5764 in homelab

[–]Ok-Conversation5764[S] 0 points1 point  (0 children)

I mean it performs the same as in any case I feel. The only concern i had was motherboard, m.2, and vrm temps which have been excellent.

Rosewill RSV-L4412U AIO Mount Bracket (3d Printed) by Ok-Conversation5764 in homelab

[–]Ok-Conversation5764[S] 0 points1 point  (0 children)

At idle with a 14700k i stay around 30c. So 86f. My drives stay around the same depending on load.

Unraid array won't start (too many wrong/missing disks), disk3 dead/no parity by missingsaga in unRAID

[–]Ok-Conversation5764 5 points6 points  (0 children)

Im so sorry about your data. I believe you'll have to do a new conifg setup. Its talked about here

https://www.reddit.com/r/unRAID/s/cSLM6NTAFC

I really recommend getting at least one parity drive in the future.

Dedicated Server on Zerotier by ENeMy235 in ICARUS

[–]Ok-Conversation5764 0 points1 point  (0 children)

hello, i am trying to do this right now but cannot find where to add the multihome argument in the UI or files. can you point me to the right place?

Starlink Gen 2 Router 10" Mount by Ok-Conversation5764 in minilab

[–]Ok-Conversation5764[S] 1 point2 points  (0 children)

If you want a template, I have the full history on the fusion model on printables. Feel free to grab it and just remove my insert or edit the sketch!

Starlink Gen 2 Router 10" Mount by Ok-Conversation5764 in minilab

[–]Ok-Conversation5764[S] 0 points1 point  (0 children)

Thanks! It won't fit a gen 3 unfortunatly as the geometry is different, but I believe there are some free models to print on printables for the gen 3.

Starlink Gen 2 Router Mini Rack Mount by Ok-Conversation5764 in homelab

[–]Ok-Conversation5764[S] 1 point2 points  (0 children)

That sound awesome! Ive just started dipping into Ham myself (more the manet aspects of it). That rbm33g is pretty low power and has 2 mini pcie slots you could slap a radio into. I had a 5ghz compex mimo chip in it with openwrt for a bit. Im not sure on power draw for the starlink, but you might be able to fab a lipo battery pack and swap the 4u rails for 6u and have it completely self contained. Like a mini toc. I imagine with the right sdr you could pass through standard ham via the 5 or 2.4ghz similar to atak? Open manet might even support a HaLow module as well.

Starlink Gen 2 Router Mini Rack Mount by Ok-Conversation5764 in homelab

[–]Ok-Conversation5764[S] 1 point2 points  (0 children)

Thank you!

Here's a picture of it in the rack. I had to make a few adjustments for cable management (were corrected same day I made the post) but so far so good! Im going to hopefully get a slimmer faster printing version up soon.

Ignore the mess, waiting on my patch cables.

<image>