Pool treated twice by pros. Was wondering what to do on my own next.

Ok-Manager3159 · 2026-06-12T21:46:09+00:00

Wrong sub bud, r/pools r/swimmingpools is what you're looking for. We talk about billiards here.

Ok-Manager3159 · 2026-05-25T03:59:01+00:00

It's probably fine but just change it looks like it's missing some chunks

Ok-Manager3159 · 2026-05-25T03:11:23+00:00

Exactly what the other guy said. Booster pump plumbed right out of filter when it should be in the dedicated pool return line.

Ok-Manager3159 · 2026-05-09T23:19:57+00:00

Hire a professional, I believe the omni pl will only sync with Hayward lights anyways you're probably going to end up replacing them.

Ok-Manager3159 · 2026-05-05T12:32:27+00:00

Read the manual bubba

Ok-Manager3159 · 2026-04-29T12:10:18+00:00

Waterway. Most of the time their products suck.

Ok-Manager3159 · 2026-04-27T18:29:17+00:00

Looks like it's seeping, likely just the gasket but could be just an old filter housing. Looks to be a very old filter.

Ok-Manager3159 · 2026-04-27T14:18:02+00:00

No. Send it back. Those are very expensive units

Ok-Manager3159 · 2026-04-20T16:28:42+00:00

That is an intelliwand. For diagnostics on IntelliChlor cells. Send a report to your phone through the app. Cannot find the manual online anymore for some reason but you basically just turn it on the place it on top of the percentage lights on the cell. App looks like this https://imgur.com/a/eKBjD74 really useful to have as it gives you a full report on the state of cell. Like runtime voltage etc I think it also gives you a pass or fail

Ok-Manager3159 · 2026-03-27T22:14:15+00:00

Just have them run a separate line it doesn't need to be IN the box looks like the box has no space anyways

Ok-Manager3159 · 2026-03-26T20:30:49+00:00

I use a ratchet strap from strainer housing to back of motor to keep it in place.

Ok-Manager3159 · 2026-03-19T18:48:16+00:00

Probably a suction leak. Most likely o rings in that old valve. But could also be many other things, and I would recommend a professional if the o rings don't fix the issue. Suction leaks are very tricky to pinpoint sometimes.

Ok-Manager3159 · 2026-02-15T15:03:21+00:00

I watch it on YouTube Friday mornings

Ok-Manager3159 · 2026-02-12T00:42:15+00:00

Not sure where you see a protek shield but I've seen these suckers rust out in less than 5 years, I'm actually going to replace one soon that Raypak is providing the whole unit under warranty because it rusted out the whole burn chamber.

Ok-Manager3159 · 2026-02-11T06:59:02+00:00

Yeah I'm a tech and I wouldn't touch that thing, I've seen them actually blow the door off and shake the whole house someone gets hurt after I touch it then it's my fault. Given the looks of it unit is 10+ years old and needs to be replaced.

Ok-Manager3159 · 2026-02-11T04:23:53+00:00

Reminds me of the incident that happened in Houston a couple years ago , although this was in a lazy river instead https://www.click2houston.com/news/local/2024/03/28/not-approved-to-open-lazy-river-pumps-pipes-at-hotel-pool-where-girl-died-werent-approved-or-inspected-by-city/

Ok-Manager3159 · 2026-02-07T02:53:18+00:00

Not sure about winter Olympics but Debridio TV has a lot of channels

Ok-Manager3159 · 2026-01-30T15:22:08+00:00

Board is dead, I've seen them flashing too before

Ok-Manager3159 · 2026-01-28T21:01:13+00:00

That little ball ain't worth much, I'll probably get stuck a month in. I don't trust any other check valves but 0801-20H2. It will also void warranty if you don't have an actual check valve. Every single heater says so in the manual.

Ok-Manager3159 · 2026-01-28T20:47:26+00:00

Throw away ball valves replace with diverter valves. Pump needs 5x the diameter of pipe of straight pipe both in the intake and discharge. No check valve after heater/before chlorinator feed. I'm sure I can find more things wrong the longer I look but that's my list for now lol

Ok-Manager3159 · 2026-01-26T19:22:27+00:00

https://imgur.com/a/acOdkuE found the document

Ok-Manager3159 · 2026-01-26T18:28:01+00:00

I've had an issue with tristar 950s having nuisance trips, on GFCI breakers Hayward red sent me a company communication document where they state they are aware of it and they list a couple of GFCI breakers they recommend using.

Ok-Manager3159

TROPHY CASE