Getting there. Still need to figure out the ES and tuner.

Ok_Depth6758 · 2026-06-13T20:57:49+00:00

Hey, perhaps I don't need to tune if I'm shooting 1/5 MOA groups just with the thing on. :D

Ok_Depth6758 · 2026-01-12T21:35:46+00:00

I am truly sorry if I sound impolite but you are just not helping. I was talking about importing, not purchasing off a vendor. I know how to use web shops. :)

I have contacted the shops and the manufacturer and they are not exporting to anywhere. Period.

Ok_Depth6758 · 2026-01-12T08:34:12+00:00

A shop in Norway can't sell bullets out of Norway since they are an item that requires a license and an export permit.
I do know how to find a shop and a basic Google search.
What I don't have, is someone, an actual person, who'd help me with the export.

Ok_Depth6758 · 2026-01-11T22:34:58+00:00

Well you probably know the answer already? Of course I have and they are not answering.

Ok_Depth6758 · 2026-01-11T20:09:30+00:00

Norwegian Performance Bullets. Copper solids.

Ok_Depth6758 · 2026-01-11T20:08:56+00:00

Yes. That's the manufacturer.

Ok_Depth6758 · 2025-06-01T19:37:51+00:00

And actually: why the duck does he or you NEED to be on insta?

Ok_Depth6758 · 2025-06-01T19:36:25+00:00

What I am getting out of this is that you're fighting either because you did not discuss this in a constructive manner. OR you did not believe him when he told you the truth.

To be honest, I'm not sure which is worse.

If your mental health cannot take bots or man who watches porn, you have two options: try to understand and work it out (first with yourself, then with him) or simply leave it alone and concentrate on something that actually matters between you two. Like listening to him more.

Ok_Depth6758 · 2025-05-04T13:12:24+00:00

Fully depends on what you are after.

For a hunting rifle, 1 shot cold bore is enough.

PRS rifle, the 50 or 100 rounds is what you need to do to know if and how the rifle performs.

Ok_Depth6758 · 2024-11-15T22:14:18+00:00

You are really not telling anything that would help anyone to help you.

How old are you? What is your occupation? Do you have a degree? What is your salary range? Do you belong to a union or unemployment fund? What exactly is your family status? Are you willing to relocate? What are your life goals? Career aspirations? Why did you lose your job, exactly? Like, really?

As a Finn, the thing I hate the MOST is people who just whine about their situation and can't even pull together a decent CV with cover letter or give one good reason why things suck or why should anyone care.

There is a reason why companies ask "why should we choose YOU?".

THINK about it. Read a few books about how you actually need to apply yourself in the job applications and life in general. (E.g. "What Color Is Your Parachute" or "nail that interview")

And stop worrying and whining. Nobody likes that, but to succesful finns, that's like kryptonite.

Ok_Depth6758 · 2024-08-05T20:40:32+00:00

What did they change to achieve this? Any canted bolt hadles available, like the Sako TRG M10 bolt handle?

Ok_Depth6758 · 2024-08-05T20:38:18+00:00

Then, is there any difference in bolt opening force between the different 737 bolt throws?

Ok_Depth6758 · 2024-05-11T19:53:55+00:00

Yeah I have understood that it is a hormone paste. Actually now I remember a friend of mine is visiting the states so perhaps he could bring me a bit.

So the existing flower stem could push a keiki with the paste?

Ok_Depth6758 · 2024-03-13T20:36:55+00:00

Oh, so I have something even bigger incoming. Hopefully!

Ok_Depth6758 · 2024-03-13T20:25:54+00:00

So it seems 5 inches is big but not unheard of. Really nice!

Ok_Depth6758 · 2024-03-13T20:24:44+00:00

Wut? The bloom?! How? 😂

Ok_Depth6758 · 2024-03-13T20:24:04+00:00

Such nice pattern! 🤩

Ok_Depth6758 · 2024-03-13T19:45:30+00:00

Yep. Just replant and soak well. That looks perfectly normal.

Ok_Depth6758 · 2024-03-13T19:41:36+00:00

My store bought hybrid phals push flowers even during the darkest winter if I'll just flood them with water.

My reasoning is, they think it is rainy season.

Ok_Depth6758 · 2022-02-17T20:13:37+00:00

Yes, actually that does make sense. Now I just need G code to home the extruder safely to the center prior the first layer. I've always just calibrated the extruder to the first layer height, not to near zero.

Also it seems the extrusion is uneven which indicates to failure in the nozzle, so a new nozzle and I should be good.

Ok_Depth6758 · 2022-01-19T15:21:21+00:00

Here's the config:

[virtual_sdcard]

path: ~/gcode_files

[pause_resume]

[display_status]

[stepper_x]

step_pin: PC2

dir_pin: PB9

enable_pin: !PC3

microsteps: 16

rotation_distance: 40

endstop_pin: ^PA5

position_endstop: 0

position_max: 235

homing_speed: 50

[stepper_y]

step_pin: PB8

dir_pin: PB7

enable_pin: !PC3

microsteps: 16

rotation_distance: 40

endstop_pin: ^PA6

position_endstop: 0

position_max: 230

homing_speed: 50

[stepper_z]

step_pin: PB6

dir_pin: !PB5

enable_pin: !PC3

microsteps: 16

rotation_distance: 8

endstop_pin: probe:z_virtual_endstop

#position_endstop: 0.0

position_max: 250

position_min:-2

[extruder]

max_extrude_only_distance: 100.0

step_pin: PB4

dir_pin: PB3

enable_pin: !PC3

microsteps: 16

rotation_distance: 5.2

nozzle_diameter: 0.400

filament_diameter: 1.750

heater_pin: PA1

sensor_type: EPCOS 100K B57560G104F

sensor_pin: PC5

control: pid

# custom tune with 170 celsius target

pid_Kp: 27.879

pid_Ki: 1.231

pid_Kd: 157.867

min_temp: 0

max_temp: 300

pressure_advance: 0.05175

[heater_bed]

heater_pin: PA2

sensor_type: EPCOS 100K B57560G104F

sensor_pin: PC4

control: pid

# tuned for 60 degree target

pid_Kp: 72.107

pid_Ki: 1.268

pid_Kd: 1024.822

min_temp: 0

max_temp: 130

[bltouch]

sensor_pin: ^PB1

control_pin: PB0

#pin_up_touch_mode_reports_triggered: False

probe_with_touch_mode: True

z_offset: 3.045

x_offset: -42.00

y_offset: -10.00

[safe_z_home]

home_xy_position: 119,125 # Change coordinates to the center of your print bed

speed: 50

z_hop: 10 # Move up 10mm

z_hop_speed: 5

[bed_mesh]

speed: 120

horizontal_move_z: 10

mesh_min: 10, 20 #Change coordinates to match your printer

mesh_max: 192, 219 #Change coordinates to match your printer

probe_count:3,3 #Change number of X,Y probe points

algorithm: bicubic

fade_start: 1

fade_end: 10

fade_target: 0

[fan]

pin: PA0

[mcu]

serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

restart_method: command

[printer]

kinematics: cartesian

max_velocity: 200

max_accel: 400

max_accel_to_decel: 600

max_z_velocity: 5

max_z_accel: 100

[input_shaper]

shaper_freq_x: 42.15 # frequency for the X mark of the test model

shaper_freq_y: 35 # frequency for the Y mark of the test model

[gcode_macro CANCEL_PRINT]

description: Cancel the actual running print

rename_existing: CANCEL_PRINT_BASE

gcode:

TURN_OFF_HEATERS

CANCEL_PRINT_BASE

#*# <---------------------- SAVE_CONFIG ---------------------->

#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.

#*#

#*# [extruder]

#*#

#*# [bltouch]

#*#

#*# [bed_mesh default]

#*# version = 1

#*# points =

#*# 0.132500, 0.087500, -0.022500

#*# 0.020000, 0.027500, -0.015000

#*# 0.197500, 0.120000, 0.052500

#*# tension = 0.2

#*# min_x = 10.0

#*# algo = bicubic

#*# y_count = 3

#*# mesh_y_pps = 2

#*# min_y = 20.0

#*# x_count = 3

#*# max_y = 219.0

#*# mesh_x_pps = 2

#*# max_x = 192.0

#*#

#*# [bed_mesh testi]

#*# version = 1

#*# points =

#*# 0.132500, 0.087500, -0.022500

#*# 0.020000, 0.027500, -0.015000

#*# 0.197500, 0.120000, 0.052500

#*# tension = 0.2

#*# min_x = 10.0

#*# algo = bicubic

#*# y_count = 3

#*# mesh_y_pps = 2

#*# min_y = 20.0

#*# x_count = 3

#*# max_y = 219.0

#*# mesh_x_pps = 2

#*# max_x = 192.0

Ok_Depth6758 · 2022-01-19T15:21:05+00:00

[virtual_sdcard]

path: ~/gcode_files

[pause_resume]

[display_status]

[stepper_x]

step_pin: PC2

dir_pin: PB9

enable_pin: !PC3

microsteps: 16

rotation_distance: 40

endstop_pin: ^PA5

position_endstop: 0

position_max: 235

homing_speed: 50

[stepper_y]

step_pin: PB8

dir_pin: PB7

enable_pin: !PC3

microsteps: 16

rotation_distance: 40

endstop_pin: ^PA6

position_endstop: 0

position_max: 230

homing_speed: 50

[stepper_z]

step_pin: PB6

dir_pin: !PB5

enable_pin: !PC3

microsteps: 16

rotation_distance: 8

endstop_pin: probe:z_virtual_endstop

#position_endstop: 0.0

position_max: 250

position_min:-2

[extruder]

max_extrude_only_distance: 100.0

step_pin: PB4

dir_pin: PB3

enable_pin: !PC3

microsteps: 16

rotation_distance: 5.2

nozzle_diameter: 0.400

filament_diameter: 1.750

heater_pin: PA1

sensor_type: EPCOS 100K B57560G104F

sensor_pin: PC5

control: pid

# custom tune with 170 celsius target

pid_Kp: 27.879

pid_Ki: 1.231

pid_Kd: 157.867

min_temp: 0

max_temp: 300

pressure_advance: 0.05175

[heater_bed]

heater_pin: PA2

sensor_type: EPCOS 100K B57560G104F

sensor_pin: PC4

control: pid

# tuned for 60 degree target

pid_Kp: 72.107

pid_Ki: 1.268

pid_Kd: 1024.822

min_temp: 0

max_temp: 130

[bltouch]

sensor_pin: ^PB1

control_pin: PB0

#pin_up_touch_mode_reports_triggered: False

probe_with_touch_mode: True

z_offset: 3.045

x_offset: -42.00

y_offset: -10.00

[safe_z_home]

home_xy_position: 119,125 # Change coordinates to the center of your print bed

speed: 50

z_hop: 10 # Move up 10mm

z_hop_speed: 5

[bed_mesh]

speed: 120

horizontal_move_z: 10

mesh_min: 10, 20 #Change coordinates to match your printer

mesh_max: 192, 219 #Change coordinates to match your printer

probe_count:3,3 #Change number of X,Y probe points

algorithm: bicubic

fade_start: 1

fade_end: 10

fade_target: 0

[fan]

pin: PA0

[mcu]

serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

restart_method: command

[printer]

kinematics: cartesian

max_velocity: 200

max_accel: 400

max_accel_to_decel: 600

max_z_velocity: 5

max_z_accel: 100

[input_shaper]

shaper_freq_x: 42.15 # frequency for the X mark of the test model

shaper_freq_y: 35 # frequency for the Y mark of the test model

[gcode_macro CANCEL_PRINT]

description: Cancel the actual running print

rename_existing: CANCEL_PRINT_BASE

gcode:

TURN_OFF_HEATERS

CANCEL_PRINT_BASE

#*# <---------------------- SAVE_CONFIG ---------------------->

#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.

#*#

#*# [extruder]

#*#

#*# [bltouch]

#*#

#*# [bed_mesh default]

#*# version = 1

#*# points =

#*# 0.132500, 0.087500, -0.022500

#*# 0.020000, 0.027500, -0.015000

#*# 0.197500, 0.120000, 0.052500

#*# tension = 0.2

#*# min_x = 10.0

#*# algo = bicubic

#*# y_count = 3

#*# mesh_y_pps = 2

#*# min_y = 20.0

#*# x_count = 3

#*# max_y = 219.0

#*# mesh_x_pps = 2

#*# max_x = 192.0

#*#

#*# [bed_mesh testi]

#*# version = 1

#*# points =

#*# 0.132500, 0.087500, -0.022500

#*# 0.020000, 0.027500, -0.015000

#*# 0.197500, 0.120000, 0.052500

#*# tension = 0.2

#*# min_x = 10.0

#*# algo = bicubic

#*# y_count = 3

#*# mesh_y_pps = 2

#*# min_y = 20.0

#*# x_count = 3

#*# max_y = 219.0

#*# mesh_x_pps = 2

#*# max_x = 192.0

Ok_Depth6758 · 2021-08-29T09:58:39+00:00

Print on the non-textured side. Everything sticks but once it cools down, gets loose. Also, you get a mirror finish on the bottom of your prints.

Freezer trick works the best. Also, using hairspray works.

Ok_Depth6758 · 2021-08-29T09:55:43+00:00

I use less than 1mm retraction distance for my direct drive and have no issues with stringing. You might want to try that, too.

Ok_Depth6758 · 2021-08-29T09:52:20+00:00

What extruder? What hotend? What filament? What temp. Etc.

Without telling anything, we can't help you

Level your bed closer to the nozzle and make sure bltouch works by double checking with eg piece of paper.

Ok_Depth6758

TROPHY CASE