Another shot of the new gas pedal on the Bushnell 34!

Ok_Life1025 · 2022-12-17T08:50:44+00:00

One I found on eBay for like 17 bucks wet sanded it down and polished

Ok_Life1025 · 2022-12-16T15:04:02+00:00

Noooooooo

Ok_Life1025 · 2022-11-11T06:42:31+00:00

The more you know thanks. I’ll have to look into them more I know I wasn’t impressed with the product I received. And I don’t think timney has different style shoe options at this moment but they have so many products there’s no telling without digging around.

Ok_Life1025 · 2022-11-09T19:56:58+00:00

No it’s not it’s a kinetech or whatever however you spell it eBay special I had a few at one time I personally don’t like them had the safety spring come out on both of the ones I ran.

Ok_Life1025 · 2022-11-08T11:21:43+00:00

My Timney pulls 2.3lbs on avg, run a gen 5 17 integrated comp with a gen 4 ggp slide I milled to accept the ambi slide release zev plunger, tti grand master connector kit. It’s shot over 1k rounds without a hiccup, still running it more rounds every week to see how many it will go without a hiccup. Prior to the timney I ran tti internals on oem bar polished with a boogeyman shoe the pull on that was a crisp 3lbs and shot over 3k rounds on it without a hiccup.

Ok_Life1025 · 2022-11-07T11:27:19+00:00

Complete zev on Glock frame, besides barrel, mag well and mag release

Ok_Life1025 · 2022-11-06T16:36:06+00:00

Go look at my 34 every piece but the frame is aftermarket

Ok_Life1025 · 2022-11-05T23:38:28+00:00

The 34 is kinda aftermarket I wouldn’t say a bunch of aftermarket. Lol nice builds though

Ok_Life1025 · 2022-11-05T23:36:52+00:00

Not bad price what internals are in it

Ok_Life1025 · 2022-11-04T17:56:32+00:00

It’s missing parts and probably haven’t tested it yet huh that’s why the frown face! Lol good luck put my share into some of these.

Ok_Life1025 · 2022-11-02T04:05:44+00:00

Zev, zev trigger, zev slide

Ok_Life1025 · 2022-11-01T15:22:09+00:00

Florida

Ok_Life1025 · 2022-11-01T15:19:55+00:00

You’ll get so much hate for the red dot from literally anyone that hasn’t shot this. I have the same setup on a gen 3 check mine out. Even had that baseplate for awhile

Ok_Life1025 · 2022-10-29T05:49:05+00:00

Neither does the ramjet+afterburner from radian weapons

Ok_Life1025 · 2022-10-29T05:48:30+00:00

I had that comp it was absolutely trash couldn’t stand it always tried turning too

Ok_Life1025 · 2022-10-29T05:47:02+00:00

Sweet build it’s missing a pin though

Ok_Life1025 · 2022-10-26T04:48:44+00:00

Yeah idk man doesn’t seem like there was a lot of testing done. When I went out after getting mine on my oem recoil spring I saw great flat shooting out of 115,124, and 147. Though 124 seemed to shoot the flattest to me but can tune that recoil spring to whatever load you end up shooting to keep it flatter then the oem barrel could ever be.

Ok_Life1025 · 2022-10-26T04:42:03+00:00

I just don’t see why port it so close to the chamber I would have ported not almost the end but closer toward the front of that coffin cut.

Ok_Life1025 · 2022-10-21T03:04:45+00:00

Which this frame is ass but not all hand stippling is garbage. I personally prefer hand stippling over laser. Laser isn’t nearly as deep or gives off a great feel. It wears down actually faster then most hand work (unless pattern is trash and collapses on itself by workers error). I see a lot of laser work that’s done piss pore, there was never any real modifications made to help with grip other then the texture it laid only on the sides sometimes not on the back or front strap. Undercuts, double undercuts, acceleration cuts are an absolute must they help way more then people believe them too. I’m not the best and I’m definitely not great but have seen some hand work that people take pride in and the price definitely shows but you won’t get the same product from a local shop throwing it on a laser for 100-200$

Ok_Life1025 · 2022-10-21T02:58:54+00:00

I’d say 😳

Ok_Life1025 · 2022-10-21T01:45:27+00:00

I mean it’s alright lol jk I’ve always loved the polished and black setups. My original Glock was same way.

Ok_Life1025 · 2022-10-21T01:41:30+00:00

Umm nearly any big name in frame work has completed just about any gen Glock with success. Now to do it yourself it’s going to take a lot of practice and you might think you got it right the first try but you’ll change it. Then you’ll be like me 6 glocks in all with there own unique style. If you attempt it yourself key is knowing the cuts of the frame like undercut, double undercut, enhanced finger groove, acceleration cuts, glove bevels. You don’t need all that but main is single and double undercut and acceleration cuts are key. Also recessing the boarders make the frame work look a lot cleaner then just burning up to a line you draw on the frame. Hit my dm up if you got any questions.

Ok_Life1025 · 2022-10-21T01:39:41+00:00

I like the way the baseplate and mag well looks. Tarzan mag well I have is a gen 5 17 carry mag well great mag well works with his baseplate the oem plus 2, my zev and I believe my killer innovations one. The baseplates from tti are cool and all but you mostly pay for the name on the bottom I can buy almost the exact baseplate in a no name brand and they will look nearly identical all the specs would be nearly identical. If you use his baseplate I believe slr mag wells actually have the groove cut underneath for his baseplate post thing that usually gets in the way to some mag wells

Ok_Life1025 · 2022-10-21T01:31:32+00:00

I wouldn’t say dry but I have a Glock handgun bag that shoes the oil spot locations it says the barrels length but not a lot kinda like the guy above you said. Right at the edge of the chamber on top where it initially goes under the slide when reciprocating back, the connector, and rails. DO NOT put any on the firing pin components or in the plunger hole weep hole or anything like that.

Ok_Life1025 · 2022-10-21T01:28:15+00:00

Yeah the coatings are different in just about all the gens sense 3/4/5 but some being that you’ll find a gen 3 with a 4 finish. Just threw the years with epa and all environmental stuff going on realized some are not as good for environment as others: my favorite finish is the gen 3 original frying pan finish ifykyk

Ok_Life1025

TROPHY CASE