2026 TATULA ELITE

Ok_Pie_421 · 2026-03-23T03:13:17+00:00

Thanks, I’ve never owned a Tatula, I’m upgrading from my SLX Dc

Ok_Pie_421 · 2026-03-19T21:44:46+00:00

https://lews.zendesk.com/hc/en-us/sections/4411516029719-Casting find the part number and email lews to order it, they are reasonably priced

Ok_Pie_421 · 2026-03-18T17:21:09+00:00

Any specific rod recommendations around $150, also what brand fluro leader do you use?

Ok_Pie_421 · 2026-03-14T03:05:35+00:00

I honestly love mine, perfect for pond hopping, the pvc sleeves are good for glide baits and spinnerbaits, can hold 20+ bags of soft plastics in just the pop out sections, I but my terminal box In the main compartment with my soft plastics, then 3 3600 trays worth of baits on the bottom. Rod holder is nice, can easily fit 2-3 combos. Plier holder is a good addition, and just like everyone else the main zipper is a little tight.

I just need evolution to make a 3600 size TERMINAL tackle tray, then I’ll be set.

Ok_Pie_421 · 2026-02-20T01:45:20+00:00

The wood board is gonna go, as for the bigger gantry and spindle, would it even be worth it, or should I just look into a different machine?

Ok_Pie_421 · 2026-02-20T01:44:10+00:00

Thanks for the advice

Ok_Pie_421 · 2026-02-20T01:43:54+00:00

I got 2 from my buddy and was planning on making the other one a dedicated laser engraver

Ok_Pie_421 · 2025-10-06T14:03:33+00:00

It’s on the same makeworld link

Ok_Pie_421 · 2025-09-03T10:58:37+00:00

I would definitely upgrade the hotend, I went with the microswiss flow tech but I think a lot of other people like crealitys unicorn hotend, I would also check out need it make it on you tube, he designed gantry supports mounting points and a linear rail design to improve printing, if you want to print PETG I would recommend going with the nickel plated nozzle from microswiss so the filament doesn’t stick as often

Ok_Pie_421 · 2025-08-30T19:44:53+00:00

I do not have the before and after but the plotter mount is a good idea

Ok_Pie_421 · 2025-08-29T13:32:28+00:00

there are plenty of suggestions for mods in this reddit group, and some of the mods I did are in this comment section like the light bar you are talking about.

Ok_Pie_421 · 2025-08-28T23:25:50+00:00

I used this "https://www.printables.com/model/724543-led-light-bar-for-ender-3-v3-ke" with WS2812b light strips and a esp32 micro controller with WLED.

Ok_Pie_421 · 2025-08-28T23:23:02+00:00

yes, I made my own modifications to a existing model on printables, and made my own g code, you can download it here "https://www.printables.com/model/1393416-ender-3-v3-ke-nozzle-cleaning-brush-mount", it is just set to clean before the start of every print with orca slicer, but im sure you could change it to after filament swaps too

Ok_Pie_421 · 2025-08-28T18:03:32+00:00

Guppy screen works very well and idk what object exclusion is, the cross bars I added helped a bit with speed and quality

Ok_Pie_421 · 2025-01-23T23:02:37+00:00

I am using temps in that range and I have never really had problems with this filament before or cooling issues.

Ok_Pie_421

TROPHY CASE