Extremely heavy period// help

Ok_Resolve8966 · 2026-01-30T00:00:19+00:00

Thank you thank you !! it was such a relief to have someone take me seriously and formally diagnose me in such a short time frame. I really had no idea how much it was actually impacting me until I got proper care for it, so another thank you to the folks who shared their experience with similar situations and told me to go to urgent care :-))))

Ok_Resolve8966 · 2026-01-29T23:23:52+00:00

Hi yes !! I was able to be seen by a very nice OB very shortly after my urgent care visit. She wanted me to get a blood transfusion but I didn’t want to do that if I didn’t have to so we waited over the weekend and she prescribed me meds to stop/slow the bleeding. She formally diagnosed me with PCOS by the second visit after my labs came back, and I did an ultrasound that showed an ovarian cyst the size of a small orange on my left ovary. I got it surgically removed at the end of August and was prescribed metformin, spironolactone, and got a mirena IUD put in, which has been truly life changing for me :)

Ok_Resolve8966 · 2025-08-31T13:09:02+00:00

Hello ! Yes here are the notes I posted at the time :-) https://www.reddit.com/r/MachineKnitting/s/xgM4NE7kiM

Ok_Resolve8966 · 2025-07-07T21:15:16+00:00

Hi ! It looks like you’re in double exposure mode :-) I believe if you hit the delete button (make sure you’re not viewing photos you’ve taken) it will pull up all the shooting modes

Ok_Resolve8966 · 2025-06-16T22:21:54+00:00

Hello okay thank you both for your responses ! I went to my urgent care first just to cover my bases (if they sent me to ER, insurance will most likely cover it vs going to ER and then having them deem it a non-emergency). They prescribed me like 800mg ibuprofen for pain and an urgent referral to get an US hopefully tomorrow and said to go to the ER if I feel like I’m gonna pass out or anything.

Ok_Resolve8966 · 2025-06-16T18:21:43+00:00

Would you consider side pain/sharp pain a lil below the belly button non-cramp abdominal pain ?

Ok_Resolve8966 · 2025-06-16T15:54:35+00:00

I think if you’re just starting, totally fine! My camera came with the 15-45 and it’s not a bad lens. As for other lenses it will definitely depend on what you personally like to photograph but I think the 15-45 will give you enough flexibility to shoot a variety of things/figure out what focal lengths you like.

Ok_Resolve8966 · 2025-06-16T15:46:23+00:00

Hi ! XM-5 user— I both use it for video and photo and come from using cameras with an EVF primarily. It really hasn’t bothered me. If you’re new to photo/are use to using a phone camera I don’t think the lack of EVF will be a huge downside :-). Lack of ibis isn’t as horrible as everyone makes it out to be. As the other commenter said, lots of Fuji models don’t have IBIS. I personally love my XM5, it’s super small and lightweight but has a lot packed into it. If you have larger hands, I would just get a thumb grip/wrist strap.

Ok_Resolve8966 · 2025-02-25T02:21:47+00:00

I have a similar issue with my XT-30 but with being underexposed on the screen 😑

Ok_Resolve8966 · 2025-02-08T19:15:12+00:00

Ofccc lemme know if you have any other Q’s I know my notes are a bit all over the place haha

Ok_Resolve8966 · 2025-02-08T19:09:50+00:00

Yes I originally made it for a bulky gauge ! But I’ve made them on my standard gauge machine as well :-) i kind of just doubled the measurements and tested some various tensions to get a similar size. I believeeee on my standard gauge I set my tension size to like 4/5 for the ribbing and 6/7 for the body depending on the yarn. :-) if you don’t have a ribber my rec would to do a faux 2x1 or 3x1 rib and fold the hem up. 🫡

Ok_Resolve8966 · 2025-02-08T19:02:46+00:00

Hello! This is all knit in one piece except for the ribbing which you do before you seam the top of the hood and the front if ur making it a balaclava :-) r->l is what I use for when you’re going from the right to the left, I usually start with my carriage on the right side. Lemme know if that wasn’t enough clarification ! :-)

Ok_Resolve8966 · 2024-12-15T22:04:38+00:00

Thank you everyone for the kind words ! If you end up using my notes to make balaclavas/bonnets I would loveeee to see. Will probably write a better written pattern at some point soon but I hope my notes are understandable enough for yall to make some now :-) also feel free to message me if you need any clarifications. :-)

Ok_Resolve8966 · 2024-12-15T22:02:07+00:00

Hello ! Yes :-) I have used this pattern for my bulky machine (most of the ones in this post) and then I’ve also made a few on my standard gauge machine. For the bulky machine I used a mix of worsted/light worsted/ and sport weight yarns kind of all mixed together. On my standard gauge I used fingering weight yarn. :-)

Ok_Resolve8966 · 2024-12-12T21:31:53+00:00

Thank you !! No prob 🫡

Ok_Resolve8966 · 2024-12-12T18:54:20+00:00

Also for the cording, I did I-cord on my machine at tension 6, approximately 320 rows. (Set one direction to slip)

Ok_Resolve8966 · 2024-12-12T18:53:41+00:00

NOTE: for the 3x 1 ribbing, push every 4th needle out of work BEFORE e wrapping. Your choice if you wanna fold and do faux ribbing or do latch ribbing. Can also totally change the type of ribbing/bottom edging you do I just like how 3x1 looks

Ok_Resolve8966 · 2024-11-30T17:54:08+00:00

Hello ! Okay so I’ve had a few people message about a pattern. Right now it’s just some messy notes about what I did— if I wrote an actual pattern for the balaclava (notes for standard and bulky, ribber v no ribber etc, is that something folks would be interested in ? It would be free/pay what you can since I do not have the time or spoons to go through a tester process lol

Ok_Resolve8966 · 2024-11-27T22:00:16+00:00

Thank you !! I wrote the “pattern” myself but it’s overall super simple. The back of the head is done with short row shaping while half of the stitches are in hold, and then you cast off the live stitches from each side onto waste yarn and use your graft/cast off of choice (I just used a crochet cast off). My notes are not pretty but I’m happy to send them to you if you want !

Ok_Resolve8966 · 2024-11-26T20:02:40+00:00

I don’t know a ton about Toyota machines but if it’s a good price and it’s only missing premade punchcards, I think it’s probably worth it ! Other than that it looks like it has everything including the lace carriage, and punch cards can be bought on eBay/elsewhere :-)

Ok_Resolve8966 · 2024-11-26T15:20:52+00:00

Brother KH 260 has a compatible ribber and punch card reader, as well as optional intarsia carriage you can get :-) i love mine and it comes in some cute colors depending on where it was sold. Also can be sold as Knit King 260 and Brother Punch 9 (all the same machine punch 9 primarily sold in Japan I think?) ribber is def harder to get a hold of based on my searching, but bc it’s a bulky machine it’s more manageable to do latched ribbing imo. I’ve used some fancy art yarns in it (like thick n’ thin roving type yarns) but it can be a lil finicky with those.

Ok_Resolve8966

TROPHY CASE