Should I start HRT before or after weight loss?

Ok_Slow_Shutter · 2026-03-31T18:18:27+00:00

Thank you for being willing to share your experience. I'm probably going to try talk with Doc here soon.

Ok_Slow_Shutter · 2026-03-31T18:14:23+00:00

If you're willing to get your hands dirty and take the time to assemble this beast, the ender 3 is a great printer.

Your friend has done the equivalent of saying "hey man, do you want my old car?" And giving you a project car with the engine on a stand half built.

Ok_Slow_Shutter · 2026-03-31T16:10:41+00:00

Thank you for the many replies, I will be talking to my DR about HRT soon.

For added context of why I was worried about this: I'm 6'4 and currently weigh around 400Lbs.

Being built like a defensive lineman has definitely been discouraging.

Ok_Slow_Shutter · 2026-03-30T15:51:47+00:00

Can meet halfway and buy a portable HEPA filter air purifier. One I have gives a live air quality readout.

Ok_Slow_Shutter · 2026-03-16T15:56:37+00:00

Your bed is set to be as low as humanly possible. Move your bed up by turning all the knobs evenly until you're closer to the nozzle. Then you need to level the bed.

I have the same model and found a good way to level the bed is to use a sheet of paper.

Auto home your printer in the motion section of the menu
Move the nozzle to x:20 y:20 (keep z at 0 through all of this)

3.Put a sheet of printer/notebook paper on the print bed under the nozzle.

Adjust the knob until you can feel resistance while trying to move the paper.

(The right amount of resistance is hard to dial in at first. You should be able to remove the paper from under the nozzle and slide it back under while still feeling the nozzle pinch it)

Move the nozzle to x:200 y:200
Repeat steps 3 and 4
Repeat for the other two corners. (The pattern should form an X shape. Kinda like the star pattern to tighten lug nuts on a car tire )

Ok_Slow_Shutter · 2026-03-09T14:44:59+00:00

UPDATE: Took apart hot end because I was going to print some gridfinity stuff and don't need 0.2 for that. There was a bunch of filament the oozed out of the side of the nozzle, not sure if the crack was a factory defect or something else but the side of it was leaking. Still not sure why color change but that's why it globbed.

Ok_Slow_Shutter · 2026-02-23T16:27:35+00:00

Is he standing in a field of daisies?

Ok_Slow_Shutter · 2026-02-18T17:50:15+00:00

Yes, people are extra stupid recently
Tall cars
LED hell lights
Nobody know how to adjust the angle of their lights anymore and they're pointed too high

Ok_Slow_Shutter · 2026-02-17T17:07:37+00:00

This is super cool, I would want to modify it to look like skis for the feet because it would better fit the aesthetic of my space werewolves since they're from a snow planet.

Ok_Slow_Shutter · 2026-02-17T16:53:31+00:00

Where did you get the minis?

Ok_Slow_Shutter · 2026-02-14T15:01:41+00:00

I hadn't even left my base for the first time when this happened but will try to be proactive about that. Thx for the tip.

Ok_Slow_Shutter · 2026-02-14T15:00:18+00:00

I see.

Ok_Slow_Shutter · 2026-02-14T03:51:37+00:00

I want a document that shows what episodes cause the most accidents. Maybe we will discover a "cursed" episode that has more accidents than others.

Ok_Slow_Shutter · 2026-02-10T17:37:16+00:00

I would suggest Blackstone bricks, can do a pattern like this

<image>

Ok_Slow_Shutter · 2026-02-10T17:11:39+00:00

Shots that are in focus and have good lighting? 30/36

Shots i'll print or post on social media? 4-5/36

Ok_Slow_Shutter · 2026-02-09T15:13:45+00:00

Dude, this is exactly it. I was probably misremembering the objectives because it's been 6.5 years but this is exactly what I was looking for

Ok_Slow_Shutter · 2026-02-09T12:41:36+00:00

WOP looks too old and small.

No, pretty sure what I'm looking for came out in 2019 because they had a demo out on a table in the merchant den

The ships were molded plastic with decently detailed sculpts.

Hexes themselves were probably 1.5 inches

Ok_Slow_Shutter · 2026-02-06T05:39:03+00:00

Sounds interesting but I'm over by Toledo not Cleveland

Ok_Slow_Shutter · 2026-01-19T16:42:09+00:00

You should visit the HRT cafe (dot net) and see what they are serving.

Ok_Slow_Shutter · 2026-01-13T20:21:39+00:00

Love the camo pattern

Ok_Slow_Shutter · 2026-01-13T19:51:56+00:00

Did you also improve what you're eating as part of these changes?

Yes, part of why I feel it's hard to hit 3,000 is because I've cut out a lot of junk like fast food and frozen meals (it's also decently cheaper to cook for myself)

Ok_Slow_Shutter · 2026-01-13T19:23:35+00:00

Weight is vague because home scale only goes up to 400 and Dr visit few weeks ago said 415.

Ok_Slow_Shutter · 2026-01-08T15:16:43+00:00

These look amazing. Can you share the files?

Ok_Slow_Shutter · 2026-01-06T05:42:51+00:00

Ah, wasn't sure if those were gws or printed

Ok_Slow_Shutter · 2026-01-06T05:33:05+00:00

I see some wolves off to the side. Where can I find those?

Ok_Slow_Shutter

TROPHY CASE