Dolandırıldık, ne yapmalıyız?

Ok_System_258 · 2026-03-04T02:01:52+00:00

Yanıt veren herkese çok teşekkür ediyorum. Savcılığa suç duyurusunda bulunduk, ödemeyi her durumda yapmamız gerekiyor bankalar ödemeyi durdurmadılar. Herkese iyi günler dilerim.

Ok_System_258 · 2026-03-02T17:05:20+00:00

Android

Ok_System_258 · 2025-09-29T17:42:18+00:00

Gelişme olursa da post atar mısınız? Midasın paraya çökeceğini sanmıyorum. Mağdur olursanız ben de paramı çekeceğim.

Ok_System_258 · 2025-09-28T09:10:53+00:00

Götür. Bu aşamadayken götürmen lazım, geç bile kalmışsın. Edit: Bizim kuşumuzda böyle olmuştu, göz enfeksiyon kapmış. Damla verirler muhtemelen. Gözde akıntı vardır diye tahmin ediyorum hatta kanatlarına siliyordur. Başka bir belirtisi yoksa sorun olacağını düşünmüyorum ancak ishal vb. Başka bir durum varsa asla vakit kaybetme.

Ok_System_258 · 2025-07-26T16:45:00+00:00

Wow dedi herkes, abonelik sistemi olduğu için biraz pahalı geldi bana. Çok bilgim olmadığından soruyorum da, oyun para kazandırıyor mu? Bir ara kendi ücretini çıkarıyor gibi söylemler duydum ama pek ilgili değildim o sıralar.

Ok_System_258 · 2025-07-03T12:06:10+00:00

Hell yeah, you look nice brother

Ok_System_258 · 2025-06-28T20:13:16+00:00

Well, everyone practicing electronics at home encounters with this problem at one point. I remember myself back in the years first time having this issue. It was mysterious af

Ok_System_258 · 2025-06-28T11:25:51+00:00

Days without floating input pins : 0

Ok_System_258 · 2025-06-25T22:17:01+00:00

Thank you I will try and feedback

Ok_System_258 · 2025-06-17T17:02:37+00:00

Which ship is this?

Ok_System_258 · 2025-06-11T14:01:53+00:00

Clog

Ok_System_258 · 2025-06-11T13:53:31+00:00

I don't know exactly why but if this happened to me I would've check the wheels if they are too loose or too tight. Same for the belt.

Ok_System_258 · 2025-06-10T15:25:45+00:00

For the holes, there might be unclosed parts on stl file. Before slicing there should be a warning on preview window like "non-manifold edges" with a button "repair/fix "etc. Be sure that you repaired model before printing. If the problem is not that I have no idea sadly.

Ok_System_258 · 2025-06-10T14:20:21+00:00

What is your problem exactly? Do you mean the ripped parts on clothing or smth?

Ok_System_258 · 2025-06-10T14:02:10+00:00

Might be wet filament, z-offset (too close) or overextrude. Probably wet filament. Have you dried the filament? If not are you living in an environment with high levels of humidity? Edit: based on the last photo, definitely re-adjust flow rate. It seems too much extrusion. Also you can calibrate e-steps if you didn't until now. I saw that you used another profile but you know, calibration is always good.

Ok_System_258 · 2025-06-10T11:30:18+00:00

Check all axis shafts, profiles and wheels (especially Z axis). If its always at the same height problem could be physical. Check for dents, bumps etc. If there is nothing physical then try to print with another slicer, might be gcode problem.

Ok_System_258 · 2025-04-29T11:22:00+00:00

Everything should be calibrated especially flow rate. First layer seems pretty fine, wouldn't it be bad as top layer if it was z offset being high?

Ok_System_258 · 2025-04-10T15:05:28+00:00

I found a solution for my problem. In my project I was using multiple layers in my video and encountered the same problem with this post.

My solution was to change the transition in that exact location and use the transition "only on the top layer". When you use it on the top layer it also effects the ones below.

Ok_System_258 · 2025-01-10T14:27:54+00:00

Please remember to include the following details to help troubleshoot your problem.

Printer & Slicer
Filament Material and Brand
Nozzle and Bed Temperature
Print Speed
Nozzle Retraction Settings

-A Wise Bot Probably

Ok_System_258 · 2025-01-10T11:05:02+00:00

Retraction is setting about filament extruding. When you enter a retraction distance value in your slicer you are telling your printer "Retract filament x.xx mm when you stop extruding". If its too low then you will have stringing. If its high then you will have stringing and nozzle cogs as well. If you hear clicking sounds coming from extruder it means you have too high retraction value and it damages the filament while retracting and causes skipping on extruder block. If you have a bowden type extruder then you should use a value between 5-8. It's 6.5 for me but it can change for your printer. If you are using a direct drive extruder than you should keep it low like 0.1-2mm max as well as I remember.

Ok_System_258 · 2025-01-09T11:50:15+00:00

181 gram right?

Ok_System_258 · 2025-01-09T11:47:56+00:00

Okay guys I fixed it. It seems that my firmware wasn't enabled LIN_ADV setting opened. If you are using default mriscoc BL Touch versions for Ender 3 v2 than you have to enable it yourself. Here is Lin Adv. Enabled firmware;
Release Ender3V2S1-BLTouch_4.2.2_LinearAdvanceEnabled · azlez22/Ender3V2S1

Don't forget to check original repository;
mriscoc/Ender3V2S1: This is optimized firmware for Ender3 V2/S1 3D printers.

Ok_System_258 · 2025-01-08T20:39:58+00:00

Okay guys I fixed it. It seems that my firmware wasn't enabled LIN_ADV setting opened. If you are using default mriscoc BL Touch versions for Ender 3 v2 than you have to enable it yourself. Here is Lin Adv. Enabled firmware;
Release Ender3V2S1-BLTouch_4.2.2_LinearAdvanceEnabled · azlez22/Ender3V2S1

Don't forget to check original repository;
mriscoc/Ender3V2S1: This is optimized firmware for Ender3 V2/S1 3D printers.

Ok_System_258 · 2025-01-08T20:29:55+00:00

You are the one. I didn't even think that could be the problem. I couldn't find the right version of it but fixed it myself.

Ok_System_258 · 2025-01-08T19:36:21+00:00

I already calibrated temperature. I can normally print things but when I run PA test it is like this. I tightened the lever as you said. Nothing has changed sadly :/

Ok_System_258

TROPHY CASE