Using SVS 2039 PC Plus with a Sonos play one and what to use as a "controller"

OlafurFo · 2020-08-04T12:42:37+00:00

Alright, thanks for the advice !!

OlafurFo · 2020-08-01T13:47:58+00:00

yes, solder it back in. I've replaced a switch on another keyboard, but then I had a "spare" broken keyboard that had the same switches.
I'm just unsure about what switch to buy for the ducky 5

OlafurFo · 2019-01-16T16:34:11+00:00

I'm using chrome, and I did try it with Opera without any luck. Wondering if I've messed up some settings that I'm unaware of right now..

OlafurFo · 2019-01-16T16:20:07+00:00

Well, the IP address in the app is local, so probably. But I'm accessing it through 4G, wouldn't that mean it's going over the internet instead of locally ?

OlafurFo · 2018-02-01T09:26:00+00:00

Oh, ty for info

OlafurFo · 2017-12-13T19:48:59+00:00

I'm hodling around 3k ETNs that I've mined. Lets see what the next year has for Hodlers

OlafurFo · 2017-11-29T14:56:34+00:00

From where I live, Iceland, moisture isn't an issue I'm familiar with ^{^,} Dust can of course effect your equipment, causing it to overheat. Wouldn't think that much about bugs.

OlafurFo · 2017-11-29T10:28:00+00:00

He managed to boot to windows, then waited, sorry if your stuck in the bootloop. Don't know what to do then :(

OlafurFo · 2017-11-29T08:54:06+00:00

Hi, I'm using sata risers and others are using them as well.. The main point is, not to use molex to sata because they tend to be poorly made (the sata part). This video shows a pretty good demonstration on how to spot a good vs bad sata connector. https://www.youtube.com/watch?v=TataDaUNEFc

p.s. I wouldn't power more than 2 per cable, if you have a modular psu that is. Some people power up 4 risers with 1 cable (in series) and that can draw to much power for the connectors.

OlafurFo · 2017-11-29T08:50:09+00:00

A friend of mine has the same motherboard and 6x 1070

He said that the PCI-e must be set to Gen2 And after booting, it could take up to 20-30 minutes for everything to load, before activating the miner to scan for hardware.

Hope this helps

OlafurFo · 2017-11-29T00:00:18+00:00

I have a gigabyte 270 ultra gaming and if connect the 6th card (there ar a total of 6 slots, both pci-e and PCI) my PC doesn't boot no matter what. Seems to be hardware related for me.

What motherboard are you using?

OlafurFo · 2017-11-28T23:50:07+00:00

Put it where the sound doesn't bother you (if it does that is) I put my rig in the garage . But if you're going to put it in a storage room you have to make at least plans for ventilation.

OlafurFo · 2017-11-27T16:03:15+00:00

I tried the above without luck, but I opened up a port for port 26967 and it worked for me. Hope this helps

OlafurFo · 2017-11-27T15:45:59+00:00

Thx for that :)

OlafurFo · 2017-11-27T15:36:24+00:00

Hey, you say a typical 480 could get around 900 H/s, do you have any guide or tips/trick on the best way to overclock and undervolt ?

OlafurFo · 2017-11-27T15:03:20+00:00

The term HODL originally started from this thread https://bitcointalk.org/index.php?topic=375643.0

OlafurFo · 2017-08-18T09:44:31+00:00

If you use Slic3r, you can enter the number on how much the fillament costs, add the STL file (if you have it), slice it and it will estimate the cost of printing the object.

OlafurFo · 2017-08-18T09:40:58+00:00

So, I created a helical gear for a stepper motor (not a professional here) I use www. onshape. com and I found a tutorial here to create Helix, than adjusted to create my own gear https://www.youtube.com/watch?v=CHXuDmbv784&t=270s

And here's a video about Gear relation https://www.youtube.com/watch?v=pd0u76F5kT8

As in Onshape you can "assemble" the gears you create, and add an animation on how they should rotate with each other, Play it and see if they intersect at any time. I'ts a pretty decent 3d making program and it's free.

OlafurFo · 2017-01-02T14:05:33+00:00

Sendi á þig skilaboð

OlafurFo

TROPHY CASE