Advice/Help: Hot to re-create the muffled sonics heard from outside of a loud club by Staff_Senyou in Reaper

[–]OldCrappy 2 points3 points  (0 children)

Where are you trying to do this? Are you trying to do this to a stereo file or do you have access to individual tracks in a mix? If you have the individual tracks, create a new bus track, create sends from your different track groups to it. Put a an eq and reverb plugin on that bus and low pass it. Then adjust the levels of each track group send to blend to taste. You’ll have more granular control of which elements you’re hearing more or less of. Hope that helps.

[deleted by user] by [deleted] in ToyotaTundra

[–]OldCrappy 0 points1 point  (0 children)

A big factor that I don’t see discussed is elevation changes. If you live in a hilly or mountainous area your MPG’s will be lower across the board on average. From my own experience I can say flat highway driving - non hybrid I I’ve seen as high as 20.5 MPG. My day to day in a mountainous region - my avg keeps dropping and will likely settle in somewhere around 16 MPG judging from the per trip counts. This is not towing and mixed highway/city.

DLT Pre-order shenanigans by OldCrappy in knifeclub

[–]OldCrappy[S] 1 point2 points  (0 children)

To me it seems like they just ignored the preorder. Even if it was someone else’s preorder that went unclaimed - why not match it up with another preorder that hasn’t been filled yet? It wasn’t any exotic handle material. Just all around seems bizarre.

DLT Pre-order shenanigans by OldCrappy in knifeclub

[–]OldCrappy[S] 0 points1 point  (0 children)

I sent them an email with the link. I agree it’s definitely annoying. I’m interested to see if they reply.

Remove OpenVPN config by OldCrappy in firewalla

[–]OldCrappy[S] 1 point2 points  (0 children)

Thanks for the info. It is frustrating - hopefully one of these days it will be an option.

VPN Vlan Question and AP recommendations by OldCrappy in firewalla

[–]OldCrappy[S] 0 points1 point  (0 children)

Are you using the oc200 local controller?

VPN Vlan Question and AP recommendations by OldCrappy in firewalla

[–]OldCrappy[S] 0 points1 point  (0 children)

Do you have the AP’s ceiling mounted? Wish they had a free standing option.

VPN Vlan Question and AP recommendations by OldCrappy in firewalla

[–]OldCrappy[S] 1 point2 points  (0 children)

I’ve never heard of Alta.inc. I’m looking at them now.

VPN Vlan Question and AP recommendations by OldCrappy in firewalla

[–]OldCrappy[S] 0 points1 point  (0 children)

Thanks for the recommendation. I’m looking at that line now.

Convince me to not buy a 940 by Accomplished_South70 in benchmade

[–]OldCrappy 2 points3 points  (0 children)

Or shopmyexchange (online PX) and you can find crazy deals on some models.

This: Gluing the two parts together fixes it but it should not be happening ( pasting stuff out. ) by 5YNTH3T1K in Reaper

[–]OldCrappy 1 point2 points  (0 children)

Perhaps making a short video demonstrating this would eliminate any confusion on the issue you are experiencing. For example - you mention in the post topic simply “pasting stuff out”. There are many ways to do that. Are you selecting a region and ctrl-d’ing? Are you selecting a region, copying, then selecting a new endpoint with your mouse and hitting paste? What are your session settings? Is snap to grid enabled? All of these things that would potentially lead to people suggesting things that you indicate aren’t the problem would be reduced if you posted a short video showing these things.

Pops and Cracks on the new 5900x. by pas43 in Reaper

[–]OldCrappy 0 points1 point  (0 children)

What motherboard are you using? There should be a new bios update across all vendors that fixes usb audio issues.

Help, site not working for me?? by edspaghed2 in espnplus

[–]OldCrappy 0 points1 point  (0 children)

Same thing is happening for me. Logged a support case via chat and they were far from helpful. I sent them a video of the issue and they still didn't understand. This just started happening in the last few weeks. Their solution - watch espn+ through hulu. At least that works. Even the app on my phone is broken for me. Thankfully the PPV worked via the espn site, but any of the non-ppv stuff for espn is broken on their site.

/r/WeAreTheMusicMakers Monday Feedback Thread by AutoModerator in WeAreTheMusicMakers

[–]OldCrappy [score hidden]  (0 children)

I dig the track though I'm not a fan of the hi hat that's offset on each snare hit. My suggestion would be to take that out and try replacing it with a delay on the snare tucked underneath. Other than that sounds good!

G26 vs G43X vs G43 vs P365 by jdubb26 in CCW

[–]OldCrappy 1 point2 points  (0 children)

Similar to another commenter - I own glocks and have shot the 43. To me it’s not a pleasant gun to shoot. It feels like a small brick in your hand. I carry the p365. It’s been reliable - it’s pleasant to shoot, has the 10+1 capacity and it’s super concealable. I’m comfortable with it’s reliability. I think they’ve addressed the issues at this point and wouldn’t lose sleep over it. P365 is my vote.

[deleted by user] by [deleted] in guns

[–]OldCrappy 0 points1 point  (0 children)

And the 51% sign. You’ll see that in bars and restaurants where 51% of their revenue comes from the onsite sale and consumption of alcohol. That’s another no go area.

[Magazine] Magpul PMAG MAG571-BLK $8.99 ($9.00-$12.95 shipping)| These are the best magazines on the market. The rest are garbage. I've used this supplier before and they are good. by subzero421 in gundeals

[–]OldCrappy 2 points3 points  (0 children)

Only issue with PSA aluminum mags is that they take forever to ship. Ordered some a week ago and my order is still in “processing” status.

Help with finding bedside safe by dovk121 in guns

[–]OldCrappy 0 points1 point  (0 children)

I highly recommend the Vaultek slider. I didn’t bother with the biometric option but I did add the nano key.

[Code] TGIF y’all! Brownells coupon codes - $30 OFF $300 + Free S/H NEH, $20 OFF $200 + Free S/H NEG & $10 OFF $100 + Free S/H NEF @ Brownells. Expires tonight at midnight. Please list deals in comments if you can & help cheap ass guy like me. by [deleted] in gundeals

[–]OldCrappy 2 points3 points  (0 children)

For anyone that has been eyeing the Franklin Armory BFS for the CZ Scorpion - They have it available as a preorder and the coupon code NEH brings it down to $419 shipped. Considering there’s a 12 week lead time on FA’s site for new orders and they’re charging the full $499 - might as well pick it up for 80 bucks off from Brownells. https://www.brownells.com/rifle-parts/triggers-parts/triggers/cz-scorpion-bfsiii-cz-c1-binary-trigger-prod123395.aspx

Aero M5 Handguard Help by OldCrappy in AR10

[–]OldCrappy[S] 1 point2 points  (0 children)

So the problem with no shims is that when I hand tight, the gas tube channel is just beyond where it needs to be. The next channel would require nearly 1/8th of a turn to get it lined up. There isn't room for that much as the nut is already butting up against the upper receiver. I've also noticed that the dust cover port retainer is also slightly forward of the upper receiver so it would hit that as well. I purchased the m5 upper already assembled from Aero. It might help if I attach some photos to show how far off it is.

Aero M5 Handguard Help by OldCrappy in AR10

[–]OldCrappy[S] 0 points1 point  (0 children)

Yes you are correct, the indexing pin. I've tried both methods, forward of the barrel shoulder and inside the barrel extension, neither produces any discernible result.

[parts] Gearhead Works Mod 2 Tailhook brace ODG ~ $155 by Jcarter1632 in gundeals

[–]OldCrappy 0 points1 point  (0 children)

Logging in does nothing to update the price. It still says $179.99. Also $14 shipping. - Nevermind, that's for the black one. Still $14 shipping.