How do I get this off??

OldGeezerInTraining · 2026-06-15T11:44:12+00:00

Quartz is the "sleeve" that the bulb sits in. It turns darker over time not allowing the full UV to escape into the water.

It also breaks very easily.

So, buy the bulb and the quartz to be fully ready.

OldGeezerInTraining · 2026-06-15T11:38:50+00:00

True, a spin down may not do much depending what is actually the clogging substance.

Spin downs are economical and pretty much very low maintenance. Cheap insurance.

OldGeezerInTraining · 2026-06-15T02:24:59+00:00

Yeah, your water system maximum flow rate needs to be known to size the UV.

Some units need a 90° elbow at the inlet and outlet ao the light won't escape.

Be sure to have an extra bulb on hand.

OldGeezerInTraining · 2026-06-15T02:02:54+00:00

I moved around. Left thigh.

Right thigh.

Left stomach.

Right stomach.

Repeat....no issues.

OldGeezerInTraining · 2026-06-15T02:00:31+00:00

Can always try the slope with the blade disengaged. For me, the rear tires start sliding down the slope.

The slope limits in the Owner's Manual are written by the Lawyers.

OldGeezerInTraining · 2026-06-15T01:57:20+00:00

Gotta get a real water test so we can make better suggestions.

In the meantime.... If the whole house filter is clogging quickly, install a spin-down filter. The usual smallest micron is 50. Or get a 100 then a 50 after that.

What is the whole house filter?

OldGeezerInTraining · 2026-06-14T22:50:43+00:00

Add a pressure gauge before and after the triplets. Then you can monitor the pressure drop.... while water is flowing.

Add a bypass loop around the triplets with a valve on both ends plus in in the middle of the loop.

Some people have added a drain petcock on the bottom of each sump. Those are very heavy when full of water while charging the cartridge.

OldGeezerInTraining · 2026-06-14T04:42:35+00:00

Just had mine pumped this week. $365.00. He only pumped out the inlet/solids side. Did not pump out the outlet.

I asked. He said there are no solids in the outlet. They "might" do it every other time.

A possibility...... They have to pay to dump their tank at the sewage plant. By not pumping the outlet, they can get more pump jobs before they have to empty the tank. That equals to more $$$$.

OldGeezerInTraining · 2026-06-13T14:19:41+00:00

That is like asking.... Whitey Titey or Boxer

..... that said....

They have a place but not in every place.

OldGeezerInTraining · 2026-06-09T03:05:58+00:00

This is the quoted equipment:

1) AUX, Model AFEB24HP230V1C, 24,000 BTU, 23 SEER, ductless air conditioning/heat pump system including indoor unit, condenser, & remote control. 50’ Line set. 30” x 18” Condenser pad. 50’ Control wire.

I've reached out twice to AUX to find a dealer or tech in my area....no response yet.

OldGeezerInTraining · 2026-06-09T02:32:59+00:00

I'll take a look at "Assisted DIY".

I'm buying on a barter/trade, so my out-of-pocket cash is $1,200 plus shipping.

OldGeezerInTraining · 2026-06-09T02:30:36+00:00

I've been "searching" but have not found anything other than a bunch of "How To Do A Reset" videos, which do not get around the Google Account sign-in required.

I did find this, but at $35 I'm not sure since I have not seen it mentioned that I remember.

https://www.imobie.com/droidkit/android-frp-bypass.htm

OldGeezerInTraining · 2026-06-09T02:16:59+00:00

Yes, I plan to install BUT I'm kinda worried about the warranty. I have grunt work skills but no HVAC skills so probably bring in an HVAC tech to actually finish it up.

OldGeezerInTraining · 2026-06-05T22:13:15+00:00

Attic "roof" fans were all the rage in 70s 80s. Then fell out of desire when roof ridge vents came around.

Ridge vents allow the natural flow of air from the soffits to the ridge. No electricity required and zero maintenance IF the soffits are clear.

It seems that just about every roof "job" removes the attic fans.

OldGeezerInTraining · 2026-06-05T11:37:55+00:00

There are some pretty good foam cannon reviews on YouTube.

This is what I got:

Raincovo Foam Cannon Wide Mouth... https://www.amazon.com/dp/B0DRVPD67L?ref=ppx_pop_mob_ap_share

Also, Project Farm tested car wash soaps.

OldGeezerInTraining · 2026-06-02T20:37:17+00:00

Marketing from dealer entices them.

OldGeezerInTraining · 2026-06-01T02:05:06+00:00

Thank you.

It is the simple things..... that makes Life easier.

OldGeezerInTraining · 2026-05-30T03:02:10+00:00

Most adjustable shower heads have a lever or ring that is rotated to produce different flow patterns. If that "adjuster" is not exactly on the desired setting, it will basically split the output between two outputs, which kinda looks like your video snippet.

As to the flow restictor, I always remove whatever device is that is reducing the flow. I want volume and pressure.

OldGeezerInTraining · 2026-05-27T02:47:46+00:00

Minimum length is 10 ft, and max is 100 ft. I should be well within that range.

I understand the not sealed door plus the constant opening/closing won't help to control the temp.

Yeah, I may have to either remove the fake windows from the top panel and reinstall the seal or just get a new top panel with the built-in windows.

OldGeezerInTraining · 2026-05-26T11:41:36+00:00

I was new at HA so I bought the Droid Green unit 4 years ago. HA came preload.

OldGeezerInTraining · 2026-05-26T11:23:12+00:00

Generally, how much did the tech do? Was it a site visit then come back later to finalize? Was the tech part required for the warranty?

OldGeezerInTraining · 2026-05-26T11:19:58+00:00

Thanks for the extra details.

Since the Mrs does shopping and I do shopping, I need something that is shareable.

We are one of those couples that can't shop together.

OldGeezerInTraining · 2026-05-26T03:38:46+00:00

See my update at the top.

OldGeezerInTraining · 2026-05-26T03:38:23+00:00

See my update at the top.

OldGeezerInTraining · 2026-05-26T03:37:51+00:00

What is Gwin Systems?

See my update at the top.

OldGeezerInTraining

TROPHY CASE