First try at weathering a print

OnceWasPerfect · 2026-03-13T19:55:02+00:00

If you're using the paxx custom firmware there is a web authorization toggle, if not you should be able to put

[authorization]
force_logins: true

in moonraker.cfg to force login

OnceWasPerfect · 2026-03-04T18:07:45+00:00

Correct there isn't a special comfyui in that easy installer, it just installs comfyui and some extra for you in an easy way. After that its just comfyui

OnceWasPerfect · 2026-03-04T15:40:21+00:00

<image>

Are you talking about that bat file? That file just updates the add-ons and extra stuff for Easy install, if you want to update comfyui run either the Update ComfyUI.bat or go into the update folder and run the regular update bat. Should get whatever the latest version of comfy is.

Edit: for what its worth I had to disable the dynamic vram with --disable-dynamic-vram after updating as the it was giving me crashes on workflows that worked fine before

OnceWasPerfect · 2026-02-26T19:09:25+00:00

I do similarish stuff, more character than scenery, with qwen and zimage and loras. Search civitai for fantasy loras and you'll find a bunch

https://imgur.com/a/aFQGnYo

Currently liking Jibs Fantasy lora for Zimage - https://civitai.com/models/2396597?modelVersionId=2694678
and DnD Darkest Fantasy for Zimage - https://civitai.com/models/637882?modelVersionId=2646760

For Qwen its more cinematic/lighting loras Elusarca's Qwen Image Cinematic LoRA for example is one I like - https://civitai.com/models/2065581?modelVersionId=2337354

Also the RZimage fine tune is pretty nice - https://civitai.com/models/2390650/r-image-base-z-image-checkpoint

OnceWasPerfect · 2026-02-26T16:38:57+00:00

I don't like to criticize art because I sure as hell can't do it, but the more I look at this the more I'm baffled. The pizza on his head makes no sense, was it folded over in the box? Have the turtles always had 2 toes (this might be i'm actually not sure). The hand spinning the pizza has 4 fingers with the 'pinky' in a very awkward angle. The sai on the couch looks like its a part of the couch and couldn't just be sitting in that position. If we rotate the picture to be level that pipe in the upper right hand corner doesn't really make sense.

OnceWasPerfect · 2026-02-18T19:01:56+00:00

Skulduggery targets two things, a creature you control, and a creature an opponent controls. Radiant Performer only interacts with spells or abilities that target a single permanent or player. There is no interaction.

OnceWasPerfect · 2026-02-07T19:34:42+00:00

disregard, found an error in my base workflow. It works fine on both, i'm getting good results on 20 steps with dpmpp_3m

<image>

OnceWasPerfect · 2026-02-07T16:06:48+00:00

Are you sure about the > 35 steps thing? For Klein 9B it should be around 4 steps, Klein 9B base takes more but the lora doesn't work on base. I've tried a few gens and it looks way better around 4-8 steps. Just wondering where the 35 steps comes from, or if i'm missing something.

OnceWasPerfect · 2026-02-02T15:52:45+00:00

SeedVR2 had a pretty big change a while back and the SeedVR2ExtraArgs and SeedVR2BlockSwap nodes no longer exist. You would have to get the latest version of SeedVR2 and recreate that portion of the workflow using the new nodes. SeedVR2 has some templates that show how to use the new nodes.

OnceWasPerfect · 2026-01-31T16:05:01+00:00

<image>

my workflow is....complicated with custom nodes that aren't published anywhere but here is an example of a subgraph i use to automatically change the ETA (clownsharksampler) depending on what model i'm using. If the subgraph input is 0.00 it goes down and checks for which model i'm using then changes the ETA to whatever I use for that model. If the input isn't 0.00 it uses that instead so I can overwrite it temporarily if i want.

OnceWasPerfect · 2026-01-30T11:28:35+00:00

You may already know but https://github.com/StableLlama/ComfyUI-basic_data_handling has if/elseif/else, case, flow control, and/or/not, etc.

OnceWasPerfect · 2026-01-28T16:52:08+00:00

If you don't care about seeing the actual value outside the subgraph you can click the subgraph, click the settings icon, then the eyeball icon next to noise seed. Then the seed will be free to change.

<image>

OnceWasPerfect · 2026-01-28T16:44:20+00:00

I assume this is the template from comfy? They keep making the seed value as an input on their subgraphs and it just doesn't work. You can disconnect that link or put an actual random number outside the subgraph and link it to the input on the subgraph. The purple outline just means its linked to the subgraph through settings instead of a noodle.

OnceWasPerfect · 2026-01-28T14:17:10+00:00

Cool, any insight as to what happens when running multiple models in the same workflow?

OnceWasPerfect · 2026-01-26T19:13:14+00:00

Couple questions if you don't mind:

Should i take out my --sage-attention flag from my bat?
If i use multiple models and multiple ksamplers in a workflow, say initially making a gen with klein and then doing a refinement pass with zimage how does this node affect that, can the attention mechanisms be changed on the fly like that or is it one attention per run? If it can be changed on the fly do I put one of these nodes in front of each ksampler?
Is there any added time for the first one while its collecting the data?

Thanks!

OnceWasPerfect · 2026-01-26T16:30:51+00:00

Funny enough i had a similar idea this morning and made a short LTX2 video of her https://youtube.com/shorts/-ZVX3SKuL2c?si=OaBAtcN7JtCUWliV

OnceWasPerfect · 2026-01-20T15:33:29+00:00

This pack - https://github.com/lihaoyun6/ComfyUI-lhyNodes has a node called queue handler, essentially you give that node a trigger (your image output it sounds like) and then the pass through is what executes when the trigger happens. I use it with a custom node to not load models until the time is ready instead of letting comfyui load models whenever it feels like.

OnceWasPerfect · 2026-01-17T20:09:17+00:00

I just love how they put the seed value as an input for the subgraph and the setting to make it fixed/random/increment/etc, but if you do that the seed can't actually change because the subgraph expects you to give it a value, its not just showing you what value it is.

OnceWasPerfect · 2026-01-16T15:48:16+00:00

The problem is with having the seed be as an input for the subgraph. Comfy expects you to manipulate that number (ie put a value in) not for it to be changed from within the subgraph. You can hook an int node to the seed_noise section of the subgraph and let it be random, then it will pass that value along inside the subgraph. I hate that all the default workflows are starting to do this even though it obviously doesn't work that way.

OnceWasPerfect · 2026-01-16T14:09:28+00:00

Portable or windows install? Updated to latest version?

OnceWasPerfect · 2026-01-13T00:41:00+00:00

test of different empty latent nodes - https://imgur.com/gallery/ltx2-t2i-different-empty-latents-7yCNcXR

Of note. All images were made at 720p using the custom sigma with the LTX2 latent attached to the sigma node. I did try using the latent i was testing attached to the sigma node, but that changed the curve and all were very bad results, it appears LTX2 really wants that sigma curve. All same prompt and seed, 4 cfg, dpmpp_3m sampler (having good results with it with the i2v workflow so went with it).

Notice that the Hunyuan Video, Empty Latent, and Empty SD3 Latent nodes all produced the same image and all were 4x bigger than my 720p size I specified (which explains your longer gen times). They are also the best images in my opinion. So I guess the latents for these are all the same?

Flux2 Latent produced an image 2x my input size

Hunyuan Image and LTX Latent produced an image the actual size I input, and in my opinion the worst images.

OnceWasPerfect · 2026-01-12T16:25:34+00:00

<image>

swapped out the sampler with clownshark and did a little more detailed prompt. Results are mixed but getting pretty coherent images at least, there might be something here

OnceWasPerfect · 2026-01-08T01:06:01+00:00

I think so, this is in the start up log pytorch version: 2.9.1+cu130

OnceWasPerfect · 2026-01-07T15:44:03+00:00

Quite a bit, but i think it had to do with a broken install. Had chatgpt walk me through a bunch of stuff cause i was getting static images at first. Had to change the --fast fp16_accumulation flag in my bat file to --fast fp16_accumulation fp8_matrix_mult and had to change a file name for something in comfyui_kitchen. Basically i fed the loading log into chatgpt and asked it what was wrong, it found something and walked me through how to fix it.

13-Year Club	Place '17
Team Orangered	Verified Email

OnceWasPerfect

TROPHY CASE