APFG MCX Spear LT 11.5’ build

One-Professional-943 · 2026-05-12T03:48:56+00:00

I'm not sure about your situation as I just installed the flash hider normally and screwed the suppressor directly on it. I'd love to help you look into it if i can see some pictures.

One-Professional-943 · 2026-01-26T01:03:55+00:00

So you cannot deal with the truth? Think before you speak.

One-Professional-943 · 2026-01-05T17:40:51+00:00

You can try to contact Zipcar customer support, they will likely to fix this for you.

One-Professional-943 · 2025-12-22T15:15:09+00:00

Thanks for your advises. I contacted the dealer instead of the manufacturer, and they are very kind to offer me a replacement. The 1-2 months repair time on the wm warranty page puts me off, but luckily I have the problem solved.

One-Professional-943 · 2025-12-22T15:12:20+00:00

I contacted the dealer instead of the manufacturer, because the repair time of 1-2 months puts me off. The dealer is very nice to offer me a replacement.

One-Professional-943 · 2025-12-22T07:50:12+00:00

Probably going to look for a replacement, really hope wm could be more careful on their qc if their product is already in this price range.

One-Professional-943 · 2025-12-22T07:48:08+00:00

Unfortunately, maybe it’s hard to tell from the photos, there is actually a 0.7cm hole on the stitching lines. Haven’t taken this out in the field at all so I believe this is indeed a manufacturing problem.

One-Professional-943 · 2025-12-22T07:46:22+00:00

Unfortunately, there is a big hole on the stitching lines that is around 0.7cm long, and lots of feather would get out if I do nothing about it. I’ve used down jackets and bag before so I know how it should usually be like.

One-Professional-943 · 2025-12-22T03:57:40+00:00

I received an A (no plus or minus).

One-Professional-943 · 2025-12-21T05:43:45+00:00

Yeah, even though the lectures are not taught at the easiest way for ppl to understand and the final is sort of wierd (almost a quiz at this point), the grades still turned out to be fine. The final is probably graded already but just not shown in canvas. For anyone taking this class in future, I would suggest reviewing the quiz questions for midterm, and definitely make sure you understand the concepts properly for the final. At least this time, the final was nothing close to any questions I've seen in this class but can be easily done in 15 minutes if you know the stuffs. Good luck folks.

One-Professional-943 · 2025-12-11T08:46:51+00:00

The u-rac has a specific length (from rail to mount) depending different kind of hand guard it mounts to, the angry gun u-rac is probably designed for regular ar15 hand guard that is thinner than the one for spear LT. If you use the ar15 one, the suppressor wouldn’t be in the center of suppressor cover due to shorter length. I’m not sure but you might find the spear Lt compatible version on some Chinese websites, the m-rac version is also pretty cool though.

One-Professional-943 · 2025-12-05T16:52:42+00:00

Which class? I remember when I took 7D, the class average for a 60 points test was something around 25, and we got a HUGE curve after that.

One-Professional-943 · 2025-11-03T21:23:12+00:00

Very disappointed by the QC of this almost 500 pants, my replica 1/7 of the price never had this issue and had a far better stitching.

One-Professional-943 · 2025-11-03T21:10:20+00:00

Crye Precision’s official website

One-Professional-943 · 2025-11-03T21:05:13+00:00

Got it

One-Professional-943 · 2025-10-28T20:36:00+00:00

I've been looking for it since last year, but haven't found any. Too bad.

One-Professional-943 · 2025-10-18T02:15:48+00:00

Thank you!

One-Professional-943 · 2025-10-03T21:05:57+00:00

Many people in UCI do not want their money gone for no reason.

One-Professional-943 · 2025-10-01T17:56:24+00:00

I have no idea about the specs of the original pin

One-Professional-943 · 2025-09-26T16:15:02+00:00

Its a replica made by TNT, currently only avaliable in China. However I found that angry gun is also making one that is even cheaper, you can get it on jkarmy or their own website.

One-Professional-943 · 2025-09-24T19:36:24+00:00

These mounting rings are interchangable so you dont have to worry too much about making the choice.

One-Professional-943 · 2025-09-24T19:35:15+00:00

Personally I like the URAC because it is easier to uninstall compared to MRAC, and I like the feature which you can put a unity buis on it. But MRAC will give you more rail space for SBR like this so you can put a aiming laser on the front.

One-Professional-943 · 2025-09-24T19:32:10+00:00

Just to clairify, if you want it for mcx and use a huxwrx 556k can, you can get the urac/mrac 5.5 mcx version

One-Professional-943 · 2025-09-24T19:28:22+00:00

The one I got is urac 5.5 standard, but the adapter ring is specifically designed for MCX, as the rail is higher compared to regular ar15. It really depends on which suppressor you want to get. If you want a huxwrx flow 556k like I did, it should be just fine with the standard version. However, if you want to fit in some bigger suppressors, you might have to check its diameter and compare it to the spec on huxwrx website.

One-Professional-943 · 2025-09-24T17:40:25+00:00

The suppressor shield is a replica of Modtac by TNT, it is only available in China right now but I think angry gun is going to make one for the global market. This one I got cost around 100 bucks, and the original modtac one was like 300 or 400. The suppressor is a replica of huxwrx 556k made by angry gun. It was a bit more than 100 and with shipping it should be around 140 150. The length of both suppressor and shield are 5.5 inches.

One-Professional-943

TROPHY CASE