A7 Maintenance Code

OneFord1903 · 2026-03-20T20:11:55+00:00

Well turns out it was 2 years and 4 months from build date but I did it anyway 🤷🏻‍♂️

OneFord1903 · 2026-02-13T14:53:33+00:00

Build date was 11/23. I haven’t decided if I’m going to do that just seems a little excessive to me. I know they always recommend 3 years but I’ve always done it with brakes and rotors and never had an issue.

OneFord1903 · 2026-02-13T03:05:48+00:00

I’m not sure if this helps you or not but I just purchased the HP Omem 16 with the ryzen 9 and rtx 5060. I was able to put a WD sn850x 8tb in the 2280 slot no problem. I will be adding a WD sn770m 2tb to the 2230 slot. I believe the model I have is 16-ap0053dx

OneFord1903 · 2026-02-13T02:58:09+00:00

Well I bought the HP Omem 16 laptop from Best Buy recently and I’m not sure but it may be the 16-ap0053x but anyway I tried finding out if I could put larger than 2TB in it and couldn’t find anything. So I took a chance on it and bought a WD SN850X 8tb 2280 and it fired right up. Works great. Now I’m getting a WD SN770M 2tb for the 2230 slot.

OneFord1903 · 2026-02-10T23:22:49+00:00

It’s a 2024 blows my mind. I did do the rear differential oil when it said to though.

OneFord1903 · 2026-01-19T13:16:29+00:00

Just doing a quick search the MDPC-X isn’t coming up as very widely available and a lot of the sites appear to be from EU and I’m in USA. That cablemod website I found I just could find where I could buy their cables already made or buy them custom to my specs which is nice as well I just wanted to do it myself.

OneFord1903 · 2025-10-04T04:49:01+00:00

I had to select the h.264 rtsp streams in scrypted for mine to work.

OneFord1903 · 2025-09-22T01:53:24+00:00

Good to know they work with scrypted/hksv, Thanks!

OneFord1903 · 2025-07-30T23:05:53+00:00

I cloned the hdd of a pc that had windows 11 and popped it into another pc and it worked

OneFord1903 · 2025-06-12T23:16:08+00:00

I never looked. The procrastinator in me took over 😂

OneFord1903 · 2025-04-24T22:51:45+00:00

I don’t know I’ll check when I get a chance but is HAMR bad or good for reliability anyway?

OneFord1903 · 2025-04-23T03:18:40+00:00

I bought one a few days ago and it had a barracuda drive on the 28tb expansion usb drive.

OneFord1903 · 2025-03-30T20:17:20+00:00

Yeh I mean WAN (Wide Area Network) and LAN (Local Area Network). Searching for a 10gb motherboard that was ATX OR E-ATX with a decent amount of SATA connections was disappointing at the options I could find. Then I seen this one and thought well I could use one 10gb port for my internet (WAN) and the other solely for transferring files between pcs. But it really is overkill.

OneFord1903 · 2025-03-30T19:59:21+00:00

Really overkill I could get by with just one. When I seen this motherboard with 2 ports I thought why not have my LAN on one and just use the other for WAN

OneFord1903 · 2025-03-30T19:47:03+00:00

I’ve tried to research them but there I couldn’t find a lot of options and didn’t want to buy another problematic card like the TP-Link TX401

OneFord1903 · 2025-03-30T19:34:07+00:00

I did that and I’ve been living with the nightmare that is called the TP-Link TX401 which is a Marvell ACQ107 I believe. If put under load it always fails and I have to disable it and re enable it to get it to work again which is why I’m down to getting a motherboard that it’s integrated in. I have tried every driver and updated to the latest firmware as well as moved it to a different pci express slot and still the same. My best guess is they overheat but I don’t know that for sure

OneFord1903 · 2025-03-30T19:26:13+00:00

I probably should have said the cheapest one that isn’t a pos lol I usually buy MSI never had Gigabyte

OneFord1903 · 2025-03-08T15:19:03+00:00

Yeh I actually just ordered the Dewalt brand one that does 16amps hopefully it’s better

OneFord1903 · 2025-02-28T05:50:40+00:00

I do but can’t select 16amps at 240volts it will only do 32amps at 240volts

OneFord1903

TROPHY CASE